Disney Nemo Trapezoid Car Sun Shades

Introduction

Thank you for choosing the Disney Nemo Trapezoid Car Sun Shades. This product is designed to provide shade and reduce glare from sunlight entering your vehicle's side windows, enhancing comfort for passengers. Please read this manual carefully before installation and use to ensure proper function and longevity of your sun shades.

Safety Information

• Ensure sun shades do not obstruct the driver's view or interfere with the safe operation of the vehicle.
• Keep the product away from open flames or high heat sources.
• Periodically check the suction cups for secure attachment to prevent detachment during driving.
• This product is not a toy. Keep out of reach of small children when not in use to prevent choking hazards from small parts like suction cups.

Package Contents

The package contains the following items:

• 2 x Disney Nemo Trapezoid Car Sun Shades (Model 13710)
• 4 x Suction Cups (2 per sun shade)

Setup Instructions

1. Clean the Window Surface: Ensure the car window surface where the sun shade will be attached is clean and dry. Dust or moisture can reduce the effectiveness of the suction cups.
2. Attach Suction Cups: Insert the small hook on each suction cup into the designated eyelets on the sun shade. Each sun shade typically has two eyelets.
3. Position the Sun Shade: Hold the sun shade against the desired car window. Adjust its position to cover the window area effectively without obstructing the driver's view.
4. Secure to Window: Press each suction cup firmly against the clean glass surface until it adheres securely. Ensure no air is trapped underneath the suction cup for maximum hold.

Image: Detail of the suction cup mechanism for attaching the sun shade to the window.

Image: The trapezoid sun shade installed on a car window, illustrating its shape and approximate coverage.

Operating Instructions

• Adjusting Position: If the sun shade needs repositioning, gently pull on the suction cup tabs to release them from the window, then re-apply as per the setup instructions.
• Removing for Storage: To remove the sun shades, gently pull the tabs on the suction cups to release the vacuum seal. The sun shades can then be folded for compact storage.

Maintenance

• Cleaning the Sun Shades: Wipe the fabric surface with a damp cloth and mild soap if necessary. Allow to air dry completely before storing. Do not machine wash or tumble dry.
• Cleaning Suction Cups: If suction cups lose their grip, wash them with warm, soapy water, rinse thoroughly, and let them air dry. This can restore their adhesive properties.
• Storage: When not in use, store the sun shades in a cool, dry place away from direct sunlight to prevent material degradation.

Image: Close-up view of the sun shade's mesh material, highlighting its texture and design.

Troubleshooting

• Problem: Suction cups do not stick to the window.
  Solution: Ensure the window surface is clean and dry. Clean the suction cups with warm, soapy water to remove any residue. Press firmly on the center of the suction cup to expel all air.
• Problem: Sun shade falls off during driving.
  Solution: Re-attach the suction cups, ensuring they are firmly pressed against a clean, dry window. Extreme temperature changes can sometimes affect suction cup performance; allow the car interior to stabilize in temperature if possible.

Specifications

Warranty and Support

This product is manufactured to high-quality standards. For any questions regarding product defects or support, please contact the retailer or manufacturer directly. Please retain your proof of purchase for any warranty claims.