Tork RK8002

Download PDF
Contents

Tork RK8002 Universal Extra Large Single-Ply Hand Roll Towel Instruction Manual

1. Introduction

This manual provides essential information for the proper use and maintenance of the Tork RK8002 Universal Extra Large Single-Ply Hand Roll Towel. Designed for hand drying applications, these towels offer a balance of quality, performance, and value. The product features an embossed texture to enhance absorbency, contributing to efficient hand drying. The roll format is intended to promote source reduction and minimize packaging waste. Long-lasting rolls are designed to reduce maintenance frequency in compatible dispensers.

2. Product Overview

The Tork RK8002 hand roll towel is a single-ply product in a natural brown color, indicating its composition from recycled fibers. It is designed for use with the H21 hardwound roll hand towel system. Key features include:

  • System Compatibility: H21 - hardwound roll hand towel system
  • Ply: 1-ply
  • Color: Natural
  • Print: No
  • Embossing: Yes, for enhanced absorbency
  • Roll Length: 800.00 feet
  • Material: 100% recycled fiber, with a minimum of 50% Post Consumer fiber
A large roll of Tork RK8002 Universal Extra Large Single-Ply Hand Roll Towel in natural brown color.

Figure 1: Tork RK8002 Universal Extra Large Single-Ply Hand Roll Towel. This image displays a single roll of the Tork RK8002 Universal Extra Large Single-Ply Hand Roll Towel. The towel is natural brown, indicating its recycled fiber composition. A section of the towel is partially unrolled, revealing its texture and single-ply construction. The central core of the roll is visible, designed for compatibility with H21 hardwound roll hand towel systems.

3. Setup: Loading the Dispenser

To ensure proper function, load the Tork RK8002 roll towel into a compatible H21 hardwound roll hand towel dispenser. Follow the specific loading instructions provided with your dispenser model.

  1. Open Dispenser: Unlock and open the front cover of the hand towel dispenser.
  2. Remove Core: If an empty roll is present, remove its core from the dispenser.
  3. Insert New Roll: Place the new Tork RK8002 roll onto the dispenser's spindle or core holder, ensuring it is seated correctly. The towel should feed from the bottom of the roll.
  4. Thread Towel: Guide the leading edge of the towel through the dispenser's feed mechanism, if applicable, until it protrudes from the dispensing opening.
  5. Close Dispenser: Close the dispenser cover and ensure it is securely latched.

4. Operating Instructions

Once the Tork RK8002 roll towel is correctly loaded into a compatible dispenser, operation is straightforward:

  • Dispense Towel: Pull the exposed towel sheet downwards or activate the dispenser's lever/sensor, depending on the dispenser type, to release a portion of the towel.
  • Tear Off: Once the desired length is dispensed, tear the towel against the dispenser's cutting edge.
  • Dispose: Dispose of used towels in an appropriate waste receptacle.

5. Maintenance: Roll Replacement

Replace the roll when it is depleted or when the dispenser indicates a low towel level.

  1. Monitor Roll Level: Regularly check the towel level through the dispenser's viewing window or by opening the dispenser.
  2. Prepare New Roll: Have a new Tork RK8002 roll towel ready for replacement.
  3. Follow Loading Steps: Refer to the 'Setup: Loading the Dispenser' section (Section 3) for detailed instructions on how to replace an empty roll with a new one.

6. Troubleshooting

If you encounter issues with the Tork RK8002 roll towel, consider the following:

  • Towel Not Dispensing:
    • Ensure the roll is correctly loaded and seated on the spindle.
    • Check if the towel is properly threaded through the dispenser's mechanism.
    • Verify that the dispenser is not jammed or obstructed.
  • Difficulty Tearing:
    • Ensure the towel is pulled firmly against the dispenser's cutting edge.
    • Inspect the dispenser's cutting mechanism for any damage or wear.
  • Roll Not Turning Freely:
    • Confirm the roll is not too tight or misaligned on the spindle.
    • Check for any foreign objects obstructing the roll's rotation.

If problems persist, consult the instruction manual for your specific dispenser model or contact Tork customer support.

7. Specifications

AttributeDetail
ManufacturerTork
Part NumberRK8002
Item Weight25.2 pounds
Product Dimensions7.8 x 9 x 7.7 inches
Item Model NumberRK8002
ColorNatural
Item Package Quantity1
CertificationCertified frustration-free
Special FeaturesHigh Absorbent, Recycled
Batteries Included?No
Batteries Required?No
Unit Count1.0 Count
Sheet Count533
Ply Rating1-Ply

8. Environmental Information

The Tork RK8002 Universal Extra Large Single-Ply Hand Roll Towel is manufactured with environmental considerations in mind:

  • Made from 100% recycled fiber.
  • Contains a minimum of 50% Post Consumer fiber.
  • ECOLOGO Certified, indicating reduced environmental impact.
  • Green Seal Certified, meeting rigorous environmental standards.
  • Compostable Verified by Independent Verification.

9. Warranty and Support

For information regarding product warranty or technical support, please refer to the official Tork website or contact Tork customer service directly. Keep your purchase receipt for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.