Introduction
Thank you for purchasing the Adesso Trio Floor Lamp, Model 4305-22. This versatile floor lamp is designed to provide ample lighting and convenient storage solutions within a compact footprint. Featuring three individual lights with pull chain switches and two clear acrylic shelves, it enhances any room with both style and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Figure 1: Adesso Trio Floor Lamp, Model 4305-22
Safety Information
- Always disconnect the power supply before cleaning, changing bulbs, or performing any maintenance.
- Use only bulbs of the specified type and wattage (three 40W incandescent or equivalent CFL/LED bulbs). Exceeding the maximum wattage can create a fire hazard.
- This lamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- Ensure the lamp is placed on a stable, level surface to prevent tipping.
- Keep the electrical cord away from heat sources, sharp edges, and wet areas.
- The clear acrylic shelves are for light decorative items or storage. Do not place heavy objects on them (maximum weight capacity per shelf is approximately 1.5 lbs).
Package Contents
Please check that all components are present before beginning assembly:
- Lamp Base (Brushed Steel)
- Vertical Poles (3 sections per pole, total 3 poles)
- White Linen Cylindrical Shades (3 pieces)
- Clear Acrylic Shelves (2 pieces)
- Pull Chain Switches (3 pieces, pre-attached to lamp sockets)
- Hardware Pack (screws, washers, etc., if applicable)
- Power Cord
Setup and Assembly
Follow these steps to assemble your Adesso Trio Floor Lamp. No special tools are required.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Poles: Connect the vertical pole sections by gently twisting them clockwise until secure. Ensure the wiring passes freely through the poles.
- Attach Base: Securely attach the assembled poles to the brushed steel lamp base.
- Install Shelves: Slide the two clear acrylic shelves onto the poles at the desired heights. The shelves are designed to fit snugly between the pole sections.
- Attach Lamp Sockets: Ensure the three lamp sockets with pre-attached pull chains are securely fastened to the top of each pole.
- Place Shades: Carefully place each white linen cylindrical shade over its respective lamp socket.
- Insert Bulbs: Screw three 40-watt incandescent or equivalent CFL/LED bulbs (not included) into the lamp sockets. Do not overtighten.
- Position Lamp: Place the lamp in its desired location, ensuring the power cord is not pinched or obstructed.
Figure 2: Detail of the lamp's base and shades.
Operating Instructions
- Power Connection: Plug the lamp's clear power cord into a standard electrical outlet. The lamp is smart outlet compatible for integration with smart home systems.
- Turning On/Off: Each of the three lights is controlled by its own pull chain switch. Pull the chain once to turn the light on, and pull it again to turn it off. This allows for customizable lighting, enabling you to illuminate one, two, or all three lights as needed.
Figure 3: Key features of the Adesso Trio Floor Lamp.
Maintenance
- Cleaning: To clean the lamp, ensure it is unplugged. Wipe the brushed steel base and poles with a soft, dry cloth. For the white linen shades, use a lint roller or a soft brush to remove dust. The clear acrylic shelves can be wiped with a damp cloth and mild soap, then dried thoroughly. Avoid abrasive cleaners.
- Bulb Replacement: Always unplug the lamp before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with three 40-watt incandescent or equivalent CFL/LED bulbs.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | 1. Lamp not plugged in. 2. Bulb is loose or burnt out. 3. Power outlet is not functioning. | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten or replace the bulb(s). 3. Test the outlet with another device or check your circuit breaker. |
| Light flickers. | 1. Loose bulb. 2. Incorrect bulb type/wattage. 3. Faulty bulb. | 1. Tighten the bulb(s). 2. Ensure bulbs meet specifications (40W incandescent or equivalent CFL/LED). 3. Replace the flickering bulb. |
| Lamp is unstable. | 1. Not on a level surface. 2. Poles not fully tightened. | 1. Move the lamp to a flat, stable surface. 2. Re-tighten all pole connections. |
Specifications
- Model Number: 4305-22
- Dimensions (D x W x H): 11.7"D x 14"W x 68"H
- Item Weight: 15.2 Pounds
- Material Type: Metal (Brushed Steel Base), Linen (Shades), Acrylic (Shelves)
- Shade Color: White
- Number of Light Sources: 3
- Bulb Base: E26 Medium
- Wattage: Max 40 watts per bulb (Incandescent or equivalent CFL/LED)
- Switch Type: Pull Chain (3 individual switches)
- Power Source: Corded Electric
- Cord Length: Approximately 5 feet (60 inches)
- Installation Type: Freestanding
- Indoor/Outdoor Usage: Indoor Only
Figure 4: Dimensions of the Adesso Trio Floor Lamp.
Warranty Information
Manufacturer Warranty Description: N/a.
For specific warranty details or to inquire about product guarantees, please refer to the documentation provided at the time of purchase or contact the retailer directly.
Customer Support
If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact the retailer where you purchased the product or visit the official Adesso website for support resources.
Adesso Official Website: www.adessohome.com