Surebonder 55038 Heavy Duty Staples

Important Safety Information

Always prioritize safety when using staples and stapling tools. Failure to follow safety guidelines can result in injury.

• Wear Safety Glasses: Always wear ANSI Z87.1 approved safety glasses to protect your eyes from flying debris or staple kickback.
• Keep hands and body parts clear of the stapler's firing mechanism and staple exit area.
• Ensure the stapler is unloaded or disconnected from power before performing any maintenance or clearing jams.
• Store staples in a dry, secure location away from children and pets.

Image: Back of the Surebonder 55038 staple box, highlighting the safety warning to always wear safety glasses (ANSI Z87.1) and listing various applications and compatible stapler models.

Product Overview

The Surebonder 55038 Heavy Duty Staples are designed for a wide range of fastening tasks. These staples feature a 3/8-inch leg length and a .417-inch narrow crown, making them suitable for various heavy-duty applications. Each box contains 1,250 staples, ensuring you have an ample supply for your projects.

Image: Front view of the Surebonder 55038 Heavy Duty Staples product box, displaying the brand, model number, staple type (Narrow Crown, 3/8 inch), and quantity (1250 staples). Several loose staples are shown in front of the box.

Specifications

• Model Number: 55038
• Staple Type: Heavy Duty, Narrow Crown (Arrow T50 Type)
• Leg Length: 3/8 inch (10mm)
• Crown Width: .417 inch
• Material: Steel
• Quantity: 1,250 staples per box
• Color: Silver
• GTIN/UPC: 018239314423

Applications

These versatile staples are suitable for a variety of fastening tasks, including:

• Insulation
• Carpeting
• Wire Mesh
• Canvas
• Roofing Paper
• Felt Stripping
• Upholstery
• Covering Cornices
• Weather Stripping
• Low Voltage Wiring

Compatible Staplers

Surebonder 55038 staples are designed to be compatible with a range of heavy-duty staplers, including but not limited to:

• Surebonder Models: 5690 Triggerfire, 5600 HD 3-in-1 Stapler, 5685 HD Professional/Contractor Gun, 5800 HD Hammer Tacker, 9600A Pneumatic Narrow Crown Stapler
• Arrow Models: T50, ET-50, ETC50, HT50A, HT50P, T55, HT55
• Stanley Models: PHT150, TR100, TRE500, TR100HL, TR200, TR60
• Powerfast (Swingline) Models: 10401, 31690, 31890
• Ace Hardware Models: 2014413
• Craftsman Models: 68434, 68514, 68517, 68492, 68515
• Black & Decker Models: 5700, 2000E, 3000E, 4000E, 6000E

Always refer to your stapler's instruction manual to confirm staple compatibility before loading.

Setup and Loading

Proper loading of staples is essential for efficient and safe operation of your stapler. The exact loading procedure may vary slightly depending on your stapler model. Always consult your stapler's specific instruction manual for detailed loading instructions.

1. Ensure Safety: Before loading, ensure the stapler is disarmed, unplugged (if electric), or the air supply is disconnected (if pneumatic).
2. Open Magazine: Locate and open the staple magazine or loading tray on your stapler. This usually involves pressing a release button or pulling a latch.
3. Insert Staples: Place a strip of Surebonder 55038 staples into the magazine with the crown (flat top) facing upwards and the legs pointing towards the stapler's nose. Ensure the staples slide smoothly into place.
4. Close Magazine: Securely close the staple magazine until it latches firmly.
5. Test (Optional): If your stapler has a test fire mechanism, you may perform a test fire on a scrap piece of material to ensure proper loading and function.

Operating Instructions

Once your stapler is loaded with Surebonder 55038 staples, follow these general operating guidelines:

1. Prepare Work Area: Ensure your work surface is stable and clear of obstructions. Identify the material you intend to staple.
2. Position Stapler: Place the nose of the stapler firmly against the material where you wish to drive the staple. Apply adequate pressure to ensure the staple penetrates correctly.
3. Activate Stapler: Depending on your stapler type, squeeze the trigger, press the handle, or activate the firing mechanism.
4. Inspect Staple: After firing, inspect the staple to ensure it is fully seated and holding the material securely.
5. Repeat: Continue stapling as needed, maintaining proper safety precautions throughout the process.

Maintenance and Storage

Proper care and storage of your Surebonder 55038 staples will ensure their longevity and performance.

• Storage: Store staples in their original packaging or a sealed container in a cool, dry place. This prevents moisture exposure, which can lead to rust and affect stapler performance.
• Avoid Damage: Do not bend or deform staple strips, as this can cause jams in your stapler.
• Keep Clean: While staples themselves require little maintenance, ensure the stapler's magazine is free of dust and debris to prevent feeding issues.

Troubleshooting

If you encounter issues while using Surebonder 55038 staples, consider the following common troubleshooting steps:

• Staples Not Firing:
  • Check if the stapler is properly loaded with staples.
  • Ensure the stapler is fully charged (if battery-powered) or connected to power/air supply.
  • Verify that the stapler's safety mechanisms are disengaged.
• Staples Jamming:
  • Unload the stapler and carefully remove any bent or damaged staples.
  • Ensure you are using the correct staple type and size (Surebonder 55038, 3/8-inch, T50 type) for your stapler.
  • Clean the staple magazine of any debris.
• Staples Not Penetrating Fully:
  • Apply more firm pressure to the stapler against the work surface.
  • Adjust the depth setting on your stapler, if available.
  • Ensure the material is not excessively hard or thick for the staple length.

For persistent issues, refer to your stapler's specific user manual or contact the stapler manufacturer's support.

Warranty and Support

Surebonder 55038 Heavy Duty Staples are manufactured to high-quality standards. For questions regarding the staples or for general product support, please contact Surebonder customer service. While staples typically do not carry a direct warranty, your satisfaction is important.

For further assistance, please visit the official Surebonder website or contact their customer support directly. You can often find contact information on the product packaging or their website.