1. Important Safety Instructions
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using this heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
- Do not use outdoors.
- This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
2. Product Overview
The Bionaire BCH8713CRE-BM is an oscillating ceramic tower heater designed for indoor use. It features a digital thermostat, two heat settings, and an EcoSmart energy-saving technology. The unit includes a backlit LED display for easy monitoring of settings.
Image 1: A black Bionaire BCH8713CRE-BM oscillating ceramic tower heater with an LED display showing 'EC F' and control buttons on top. The heater features a diamond-patterned metal grille.
Key Features:
- 2 Heat Settings: Provides flexible heating options.
- Digital Thermostat: Allows precise temperature control.
- Backlit LED Display: Clearly shows current settings and temperature.
- Oscillation Feature: Distributes heat evenly across the room.
- EcoSmart Technology: Designed for energy-efficient operation.
- Heating Area: Capable of heating up to 150 square feet.
3. Setup
The Bionaire BCH8713CRE-BM heater requires no assembly. Follow these steps for initial setup:
- Unpack: Carefully remove the heater from its packaging. Retain packaging for future storage if desired.
- Placement: Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 m) away from walls, furniture, and other combustible materials. Do not place it on soft surfaces like rugs or carpets that could block air vents.
- Power Connection: Ensure the heater is in the 'OFF' position. Plug the power cord directly into a 120V AC electrical wall outlet. Do not use extension cords or power strips.
4. Operating Instructions
Familiarize yourself with the control panel located on the top of the heater.
Power On/Off:
- Press the Power button (symbol: circle with a vertical line) to turn the heater ON or OFF. The LED display will illuminate when the heater is on.
Adjusting Heat Settings:
- Press the Mode button (symbol: square with lines) to cycle through the available heat settings: Low (I) and High (II). The selected setting will be indicated on the LED display.
Setting the Digital Thermostat:
- When the heater is ON, use the Up arrow (symbol: triangle pointing up) and Down arrow (symbol: triangle pointing down) buttons to adjust the desired temperature. The LED display will show the set temperature.
- The heater will automatically cycle ON and OFF to maintain the set temperature.
Oscillation Function:
- Press the Oscillation button (symbol: two arrows forming a circle) to activate or deactivate the oscillation feature. When active, the heater will rotate from side to side to distribute heat more broadly.
EcoSmart Technology:
- The EcoSmart feature automatically adjusts the heat output to maintain the set temperature while minimizing energy consumption. This mode is typically engaged when the heater is set to a specific temperature.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
Cleaning:
- Disconnect Power: Always unplug the heater from the electrical outlet and allow it to cool completely before cleaning.
- Exterior Cleaning: Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Air Vents: Use a vacuum cleaner with a brush attachment to gently remove dust and lint from the air intake and exhaust grilles. Do not attempt to disassemble the heater for cleaning.
Storage:
- If storing the heater for an extended period, clean it thoroughly as described above.
- Store the heater in its original packaging, if possible, in a cool, dry place.
- Do not place heavy objects on top of the heater during storage.
6. Troubleshooting
If your heater is not operating correctly, consult the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power to the unit. Overheat protection activated. Tip-over switch activated. | Ensure the power cord is securely plugged into a working outlet. Unplug the heater, wait 10 minutes for it to cool, then plug it back in. Ensure the heater is on a firm, level surface. |
| Heater produces no heat or insufficient heat. | Temperature setting is too low. Air intake/exhaust blocked. Room temperature already reached set point. | Increase the desired temperature setting using the Up arrow button. Check and clear any obstructions from the air vents. The heater will cycle off when the room reaches the set temperature. It will resume heating when the temperature drops. |
| Oscillation function not working. | Oscillation feature is turned off. | Press the Oscillation button to activate the feature. |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
| Specification | Detail |
|---|---|
| Model Number | BCH8713CRE-BM |
| Brand | Bionaire |
| Item Weight | 5.4 Pounds (2.45 kg) |
| Product Dimensions | 18.54 x 23.11 x 58.42 cm |
| Form Factor | Tower |
| Heating Method | Ceramic |
| Assembly Required | No |
| Batteries Required | No |
| Special Feature | Oscillating |
| Usage Environment | Indoor |
| Power Source | Electric |
8. Warranty and Support
For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Bionaire website. Keep your purchase receipt as proof of purchase for any warranty claims.
If you have questions about the operation, maintenance, or troubleshooting of your Bionaire BCH8713CRE-BM heater that are not covered in this manual, please contact Bionaire customer service for assistance.
