Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Schellenberg RolloDrive 65 Standard Electric Belt Winder. Please read this manual thoroughly before beginning installation or operation to ensure safe and efficient use of the product.
Product Overview
The Schellenberg RolloDrive 65 Standard is an electric belt winder designed for flush-mounted installation, ideal for automating roller shutters. It is suitable for roller shutters up to 6 m² (plastic) and for wide belt straps of 23 mm (Maxi system), with a hole spacing of 165 mm or 185 mm. Key features include time automation, automatic obstacle detection, anti-blocking protection, sun and twilight functions, and 3 LED indicators.
Figure 1: The Schellenberg RolloDrive 65 Standard electric belt winder alongside its product packaging.
Setup and Installation
Before installation, ensure the power supply is disconnected. The RolloDrive 65 Standard is designed for easy flush-mounted installation, making it suitable for tenants.
What's in the Box
- 1 x RolloDrive 65 STANDARD unit
- 1 x 1.5 m power cable
- 1 x Mounting instructions
- Mounting screws
Figure 2: All components included in the RolloDrive 65 Standard package, including the main unit, power cable, and manual.
Installation Steps
- Preparation: Ensure the power to the roller shutter area is turned off at the main circuit breaker. Remove the existing manual belt winder from its flush-mounted box.
- Mounting the Unit: Carefully insert the Schellenberg RolloDrive 65 Standard into the existing flush-mounted box. The unit is designed to fit standard 165 mm or 185 mm hole spacings.
- Connecting Power: Connect the provided 1.5 m power cable to the unit and plug it into a suitable power outlet. No complex electrical work is required.
- Belt Insertion: Guide the roller shutter belt into the winder mechanism as per the detailed instructions in the included mounting manual. Ensure the belt is properly seated and tensioned.
- Securing the Unit: Secure the unit to the wall using the provided mounting screws. Restore power to the circuit.
Figure 3: The electric belt winder being inserted into the wall opening for flush mounting.
Figure 4: Detail of the power cable being connected to the back of the RolloDrive 65 Standard unit.
Operating Instructions
The Schellenberg RolloDrive 65 Standard offers both manual and automatic operation modes.
Manual Operation
- Opening/Closing: Use the up and down buttons on the unit to manually raise or lower your roller shutter.
Figure 5: A user operating the RolloDrive 65 Standard by pressing one of its control buttons.
Automatic Functions
- Time Automation: Program specific times for your roller shutters to open and close automatically. Refer to the detailed programming steps in the included manual for setting daily or weekly schedules.
- Automatic Obstacle Detection: The unit is equipped with a safety shutdown feature. If the roller shutter encounters an obstacle during operation, the drive will stop automatically to prevent damage.
- Anti-Blocking Protection: This feature prevents the motor from overheating or being damaged if the roller shutter gets stuck or blocked.
- Sun and Twilight Function: Utilize the integrated light sensor (if applicable, or external sensor) to automatically adjust roller shutter positions based on sunlight intensity, providing optimal shading or privacy.
- LED Indicators: The 3 LEDs on the unit provide visual feedback on the operating status and programmed functions. Consult the manual for specific LED patterns and their meanings.
Figure 6: An illustrative diagram highlighting the key operational features such as automatic time settings, obstacle detection, and light-dependent control.
Maintenance
The Schellenberg RolloDrive 65 Standard requires minimal maintenance. Regular cleaning and inspection will ensure its longevity and optimal performance.
- Cleaning: Wipe the surface of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Belt Inspection: Periodically check the roller shutter belt for any signs of wear, fraying, or damage. A worn belt can affect the winder's performance and may need replacement.
- Roller Shutter Condition: Ensure your roller shutters are in good working condition and move freely. Lubricate moving parts if necessary to reduce strain on the winder.
Troubleshooting
If you encounter issues with your RolloDrive 65 Standard, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit stops or does not move the belt. | Safety shutdown activated due to an obstacle or blockage. | Check for obstructions in the roller shutter's path. The unit will attempt to move in the opposite direction. Once the obstacle is removed, normal operation can resume. Ensure the roller shutter mechanism is not stiff or iced. |
| Roller shutter does not move to programmed position. | Power outage or incorrect programming. | If there was a power outage, reprogram the time settings. The end positions are usually retained. Verify programming steps in the manual. |
| Unit is louder than expected. | Normal operating noise or friction in the roller shutter mechanism. | Some operational noise is normal for electric belt winders. Ensure the roller shutter runs smoothly and is well-maintained to minimize additional noise from friction. |
| LED indicators are not functioning as expected. | Error state or specific function active. | Consult the detailed LED indicator guide in the full instruction manual to diagnose the specific issue. |
If problems persist after attempting these solutions, please contact Schellenberg customer support.
Specifications
| Attribute | Value |
|---|---|
| Manufacturer | Schellenberg |
| Model Number | 22765 |
| Product Dimensions (L x W x H) | 21 x 5.9 x 2.7 cm |
| Item Weight | 1 g |
| Color | Rollodrive 65 Standard |
| Style | Standard |
| Wattage | 115 Watts |
| Operating Voltage | 230 Volts |
| Max. Roller Shutter Area (Plastic) | 6.0 m² |
| Max. Pulling Force | 45 kg |
| Belt Width Compatibility | 23 mm (System Maxi) |
| Hole Spacing Compatibility | 165 mm or 185 mm |
Figure 7: Detailed dimensions of the RolloDrive 65 Standard unit.
Warranty and Support
Schellenberg products are known for their quality and durability. For any questions regarding your Schellenberg RolloDrive 65 Standard, including installation, operation, or troubleshooting, please contact Schellenberg customer support.
You can find more information and contact details on the official Schellenberg website or through your retailer.
Schellenberg Customer Support: Refer to the contact information provided in your product packaging or on the official Schellenberg website.
