1. Product Overview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.
Figure 1: Front view of the Progress Lighting P6064-31 Wall Lantern.
2. Safety Information
WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Do not exceed the maximum wattage specified for the bulb.
- Handle glass components with care to prevent breakage.
- Keep flammable materials away from the light fixture.
3. Package Contents
Verify that all components are present before beginning installation:
- Wall Lantern Fixture (P6064-31)
- Etched Glass Shade
- Mounting Hardware Kit
- Installation Sheet
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | P6064-31 |
| Brand | Progress Lighting |
| Finish Type | Finished (Black) |
| Product Dimensions | 16.13"L x 9.25"W x 6.13"H |
| Item Weight | 4.63 Pounds |
| Mounting Type | Protruding |
| Water Resistance Level | Water Resistant |
| Light Source Wattage | 100 Watts (Max) |
| Voltage | 120 Volts |
| Light Output Maximum | 1600 Lumens |
| Light Source Type | Incandescent (Medium Base) |
| Material | Aluminum |
Figure 2: Product dimensions for the P6064-31 Wall Lantern.
5. Installation Instructions
5.1 Pre-Installation
- Turn off power at the circuit breaker or fuse box.
- Carefully unpack the fixture and inspect for any damage.
- Ensure all parts listed in Section 3 are present.
5.2 Sizing and Placement Guidance
Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.
Video: Outdoor Lighting - Sizing and Selection. This video provides guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, including wall lanterns, for entryways and garages.
- Fixture Size: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
- Mounting Height: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
- Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
- Garage Doors: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.
Figure 3: Example of wall lantern placement for an entryway.
Figure 4: Example of wall lantern placement for a garage.
5.3 Wiring and Mounting
- Attach the mounting bracket to the junction box using the provided screws.
- Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
- Carefully tuck all wires into the junction box.
- Align the fixture with the mounting bracket and secure it with the provided screws or nuts.
5.4 Bulb Installation
- Insert one medium base incandescent bulb (not included) into the socket.
- Do not exceed the maximum wattage of 100 Watts.
- Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.
6. Operating Instructions
Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.
7. Maintenance
To maintain the appearance and functionality of your fixture:
- Cleaning: Turn off power before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Bulb Replacement: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.
8. Troubleshooting
If your fixture is not operating correctly, refer to the following common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture | Check circuit breaker, wall switch, and wiring connections. |
| Bulb is burned out | Replace the bulb. | Ensure bulb is screwed in tightly. |
| Flickering light | Loose bulb or wiring connection | Tighten bulb. Check wiring connections (with power off). |
| Fixture is dim | Incorrect bulb wattage | Ensure bulb wattage is appropriate and not too low. |
9. Warranty and Support
This Progress Lighting fixture is covered by a 1-year Limited Warranty. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.
For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting website.
