Introduction
This manual provides essential information for the proper installation, maintenance, and troubleshooting of your De'Longhi Induction Pipe for Frother, Model 5332259800. This silicone pipe is a genuine replacement part designed to ensure optimal performance of your De'Longhi coffee machine's milk frothing system.

Figure 1: De'Longhi Induction Pipe for Frother (Model 5332259800). This image shows the translucent silicone pipe, which is a replacement component for the milk frothing system of compatible De'Longhi coffee machines.
Compatibility
This induction pipe is compatible with various De'Longhi coffee machine models. Please verify your machine's model number against the list below to ensure proper fit and function.
- De'Longhi ESAM04.350.S Magnifica
- De'Longhi ESAM5500 Perfecta Cappuccino
- De'Longhi ESAM5500.L Perfecta burl wood
- De'Longhi ESAM5500.M Perfecta Cappuccino
- De'Longhi ESAM5500.P Perfecta leather
- De'Longhi ESAM5500.R Perfecta burl wood
- De'Longhi ESAM5500.S Perfecta Cappuccino
- De'Longhi ESAM5500.T Perfecta Titanium
- De'Longhi ESAM5500.W Perfecta Cappuccino
- De'Longhi ESAM5500 M Perfecta Cappuccino
- De'Longhi ESAM5600 Perfecta
- De'Longhi ESAM5600.S Perfecta Cappuccino
- De'Longhi ESAM5600.EX:1 Perfecta
- De'Longhi ESAM5600.EX:2 Perfecta
- De'Longhi ESAM5700.S Perfecta
- De'Longhi ESAM6620 Prima Donna
- De'Longhi ESAM6700 Prima Donna Avant
- De'Longhi ESAM6700.EX:1 Prima Donna Avant
- De'Longhi ESAM6700.EX:2 Prima Donna Avant, Stainless Steel
Installation (Setup)
Replacing the induction pipe requires careful handling. Always ensure the coffee machine is unplugged and cooled down before beginning any maintenance or part replacement.
- Preparation: Unplug the De'Longhi coffee machine from the power outlet. Allow the machine to cool completely if it has recently been in use.
- Access the Frother System: Depending on your specific model, you may need to remove the milk frother attachment or access the internal components where the pipe connects. Refer to your coffee machine's original user manual for detailed instructions on accessing the frothing system.
- Remove Old Pipe: Carefully disconnect the old induction pipe. Note its orientation and connection points to ensure correct installation of the new pipe. The pipe may be secured with clips or simply pushed onto connectors.
- Install New Pipe: Gently push the new De'Longhi Induction Pipe (Model 5332259800) onto the designated connection points. Ensure a snug and secure fit to prevent leaks and ensure proper milk flow. Do not force the pipe, as this could damage the connectors.
- Reassemble: Reassemble any parts of the coffee machine or frother attachment that were removed.
- Test: Plug the coffee machine back into the power outlet. Perform a test run of the milk frothing function with water first to check for any leaks or improper operation before using milk.
Note: If you are unsure about any step, it is recommended to consult a qualified technician or the official De'Longhi service center.
Maintenance and Cleaning
Regular cleaning of the induction pipe is crucial for hygiene and optimal frothing performance. Milk residues can clog the pipe and affect the quality of frothed milk.
- Daily Cleaning: After each use, detach the frother components, including the induction pipe, and rinse them thoroughly under warm running water. Use a soft brush if necessary to remove any milk residue.
- Weekly Deep Cleaning: For a more thorough clean, soak the pipe and other frother components in warm water with a mild detergent or a specialized milk system cleaner. Follow the cleaner's instructions for dilution and soaking time. Rinse thoroughly afterwards.
- Drying: Ensure all components, including the pipe, are completely dry before reassembling them onto the coffee machine.
Troubleshooting
If you experience issues with your milk frother after replacing the pipe, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No milk frothing or poor foam quality |
|
|
| Milk leaks from the pipe connections |
|
|
If the problem persists after following these steps, please contact De'Longhi customer support or a certified service technician.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Induction Pipe for Frother |
| Model Number | 5332259800 |
| Material | Silicone |
| Compatibility | Specific De'Longhi ESAM and Prima Donna series coffee machines (see Compatibility section) |
| Part Type | Genuine De'Longhi Replacement Part |
Note: The product description mentions "Silicone" in the title, and "Silikonrohr" (Silicone pipe) in features, which is consistent with the visual appearance of the pipe.
Warranty and Support
For information regarding warranty coverage for this replacement part, please refer to the original warranty documentation provided with your De'Longhi coffee machine or contact De'Longhi customer support directly.
De'Longhi Customer Support:
- Visit the official De'Longhi website for support resources, FAQs, and contact information.
- Refer to the contact details provided in your coffee machine's original user manual.
- For UK customers, you can often find support details on the De'Longhi Store on Amazon.co.uk.