1. Introduction
The Audiopipe NIPPON PROTECT-AC220 is a surge protector designed to safeguard 220V electrical appliances, such as air conditioners and freezers, from voltage fluctuations and power surges. This manual provides essential information for the proper installation, operation, and maintenance of your device.
2. Safety Information
WARNING: To reduce the risk of electric shock, fire, or injury, please read and follow all instructions carefully.
- Ensure the appliance to be protected is rated for 220V operation.
- Do not use this device with appliances exceeding 3600W or 15A.
- Do not disassemble or modify the surge protector.
- Keep away from water and excessive moisture.
- Ensure the wall outlet is properly grounded.
- Unplug the surge protector from the wall outlet before cleaning or when not in use for extended periods.
3. Product Overview
The PROTECT-AC220 features a compact design with clear LED indicators to show its operational status.
Figure 1: Front View. This image displays the front of the Audiopipe NIPPON PROTECT-AC220 Surge Protector. It features three LED indicators labeled 'POWER OFF', 'SAFETY CYCLE', and 'POWER ON' at the top. Below the indicators is the text 'Pipeman's INSTALLATION SOLUTION' and a 220V outlet designed for appliances with one ground and two horizontal prongs.
Figure 2: Back View. The back of the Audiopipe NIPPON PROTECT-AC220 Surge Protector is shown, featuring a product label with specifications such as 'AC 220V 60Hz, 15A', 'Capacity: 3600W Max', and 'Safety Cycle: 4 Minutes'. The plug, designed for 220V outlets, is also visible.
Figure 3: Packaging Back with Instructions. This image shows the back of the product packaging, which includes detailed instructions for use in both English and Spanish. It explains how to plug in the unit, the 4-minute power-on delay, and the meaning of the LED indicators: Green for 'POWER ON' (normal voltage), Red for 'POWER OFF' (over/under voltage), and Yellow for 'SAFETY CYCLE' (delay period).
Figure 4: Feature Diagram. A diagram highlighting key features of the PROTECT-AC220, such as over-voltage disconnection, a 4-minute safety cycle, a 3-mode LED indicator, and a detachable ground pin. Technical specifications like 'Capacity: 3600W, 2HP', 'Surge Suppressor: 90 Joules, 2ms', 'Working Voltage: AC 220V', and 'Safety Range: AC 187-245V' are also listed. The UPC is 784644513651.
4. Setup
Follow these steps to properly set up your surge protector:
- Unplug Appliance: Disconnect the appliance you wish to protect from its wall outlet.
- Plug in Surge Protector: Insert the PROTECT-AC220 into a 220V AC wall outlet. Ensure the outlet has one ground and two horizontal prongs.
- Observe Safety Cycle: The red 'POWER OFF' LED indicator will turn on initially. This indicates the unit is performing a 4-minute safety cycle to ensure power consistency.
- Connect Appliance: After the 4-minute safety cycle, the yellow 'SAFETY CYCLE' LED will turn off, and the green 'POWER ON' LED will illuminate, indicating that stable power is being supplied. You can then plug your appliance into the surge protector.
5. Operating Instructions
The PROTECT-AC220 operates automatically to protect your appliances. Understanding the LED indicators is key to monitoring its status.
LED Indicators:
- Green (POWER ON): Illuminates when the power line voltage is within the safe operating range (AC 187-245V) and the appliance can operate safely.
- Red (POWER OFF): Illuminates whenever there is a power surge, power loss, or the voltage is higher or lower than the safe operating range. Output to the appliance is deactivated to protect it.
- Yellow (SAFETY CYCLE): Illuminates during the 4-minute delay period after a power flicker, surge, blackout, or when the unit is first plugged in. During this time, the appliance is blocked from receiving power.
Understanding the Delay Function:
The 4-minute safety cycle (indicated by the yellow LED) is a critical feature. It prevents immediate power restoration to your appliance after a power interruption, protecting sensitive components from potential damage caused by unstable power during startup. Once the power stabilizes for 4 minutes, the green 'POWER ON' LED will light up, and power will be supplied to your appliance.
Demonstration Videos:
Video 1: Operating Status. This video demonstrates the operating status indicators of a voltage protector, showing how different colored lights correspond to normal voltage, overvoltage, undervoltage, and delay states.
Video 2: Functions and Usage. This video provides an introduction to the functions and usage of a voltage protector, including how to adjust its parameters for high voltage protection, low voltage protection, and delay time.
6. Specifications
| Feature | Specification |
|---|---|
| Model Name | PROTECT-AC220 |
| Brand | Audiopipe NIPPON |
| Working Voltage | 220 Volts |
| Capacity | 3600W, 2HP |
| Surge Suppressor | 90 Joules, 2ms |
| Safety Cycle Delay | Approx. 4 Minutes |
| Safety Range | AC 187-245V |
| Product Dimensions | 6.7 x 6.4 x 1.7 inches |
| Item Weight | 4.8 ounces |
| Color | White |
| Power Source | Corded Electric |
| Form Factor | Portable |
7. Troubleshooting
- No Power to Appliance:
- Check if the 'POWER OFF' (red) LED is illuminated. This indicates a voltage issue (too high or too low) or a power outage. The unit will restore power once conditions normalize.
- If the 'SAFETY CYCLE' (yellow) LED is on, the unit is in its 4-minute delay period. Wait for the green 'POWER ON' LED to light up.
- Ensure the surge protector is firmly plugged into the wall outlet and the appliance is firmly plugged into the surge protector.
- Surge Protector Not Turning On:
- Verify that the wall outlet has power by testing it with another device.
- Ensure the voltage in your area is within the operating range of 187-245V AC.
8. Maintenance
- Keep the surge protector clean and free from dust. Use a dry, soft cloth for cleaning.
- Do not use liquid cleaners or aerosols.
- Store in a cool, dry place when not in use.
9. Warranty & Support
This Audiopipe NIPPON PROTECT-AC220 Surge Protector comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Audiopipe customer support.
For technical assistance or further inquiries, please visit the Audiopipe Store on Amazon or contact their authorized service center.
