WMF Diadem 11-Piece Stainless Steel Cookware Set Instruction Manual

Introduction

This manual provides essential instructions for the safe and effective use, care, and maintenance of your WMF Diadem 11-Piece Stainless Steel Cookware Set. Please read these instructions thoroughly before first use and retain them for future reference.

Product Components

Your WMF Diadem 11-Piece Cookware Set includes the following items:

• 1 x 3 qt Covered Low Casserole
• 1 x 2 qt Covered High Casserole
• 1 x 3.5 qt Covered High Casserole
• 1 x 6 qt Covered High Casserole
• 1 x 1.5 qt Saucepan
• 1 x 9.5" Frying Pan
• 1 x 11" Frying Pan
• 4 x Glass Lids (for casseroles)

Image: The WMF Diadem 11-Piece Stainless Steel Cookware Set, showcasing the various pots, pans, and glass lids included.

Setup and First Use

1. Unpacking: Carefully remove all cookware pieces and packaging materials. Inspect each item for any signs of damage.
2. Initial Cleaning: Before first use, wash all pots, pans, and lids thoroughly with warm soapy water. Rinse well and dry immediately to prevent water spots.
3. Label Removal: Ensure all labels and stickers are completely removed from the cookware surfaces.

Operating Instructions

Stovetop Compatibility

Your WMF Diadem cookware is designed with a TransTherm base, ensuring optimal heat distribution and retention. It is compatible with all common stovetop types:

• Induction Stovetops: Fully compatible.
• Gas Stovetops: Fully compatible. Ensure flame size does not extend beyond the base of the pot to prevent handle damage.
• Electric Stovetops: Fully compatible.

Cooking Guidelines

• Heat Management: Due to the efficient TransTherm base, lower to medium heat settings are often sufficient for most cooking tasks. High heat should only be used for boiling water or searing, and only for short periods.
• Oven Use: All cookware pieces, including those with glass lids, are oven safe. However, avoid extreme temperature changes with glass lids to prevent thermal shock.
• Hollow Handles: The hollow handles are designed to reduce heat transfer, making them safer to touch during cooking. Always use oven mitts or pot holders when handling hot cookware, especially after prolonged cooking or oven use.
• Pouring Rims: The wide pouring rims facilitate easy and drip-free transfer of liquids from pots to dishes.
• Preventing Sticking: To minimize food sticking, preheat the pan over medium heat for a few minutes before adding oil or food. Ensure oil is hot before adding food.

Maintenance and Cleaning

• Dishwasher Safe: Your WMF Diadem cookware is dishwasher safe. However, hand washing is recommended for optimal longevity and to maintain the shine of the stainless steel.
• Hand Washing: Wash with warm soapy water and a soft sponge or cloth. For stubborn food residues, soak the pan in warm soapy water before cleaning. Avoid abrasive cleaners or steel wool, which can scratch the surface.
• Drying: Always dry cookware immediately after washing to prevent water spots and maintain its luster.
• Lid Care: The glass lids can be washed by hand or in the dishwasher. If water gets trapped between the glass and the metal handle, it may be necessary to carefully unscrew the handle, clean, and then reassemble.
• Removing Stains: For white mineral deposits (from hard water) or iridescent discoloration, use a solution of vinegar or lemon juice, then rinse and dry. For burnt-on food, fill the pot with water and a little dish soap, bring to a boil, then let it cool and clean.

Troubleshooting

Food Sticking to Pan:

Ensure the pan is properly preheated before adding oil and food. Use sufficient oil or fat. For stainless steel, a hot pan and hot oil are key to preventing sticking.

White Spots or Discoloration:

These are typically mineral deposits from water or starch. They can be removed by boiling a solution of water and vinegar (1:1 ratio) in the pot, then washing and drying. Avoid adding salt to cold water in the pot, as this can cause pitting.

Water Trapped in Lid Handle:

If water accumulates within the lid handle assembly after washing, carefully unscrew the handle to separate the components, allow them to dry completely, and then reassemble. This ensures hygiene and prevents residue buildup.

Specifications

Warranty and Support

For information regarding warranty coverage, product support, or service inquiries, please refer to the official WMF website or contact WMF customer service directly. Contact details are typically provided with your purchase documentation or on the manufacturer's website.

WMF Official Website: www.wmf.com