CorLiving Woodgrove DWG-914-B Swivel Counter Height Barstool Instruction Manual

1. Product Overview

The CorLiving Woodgrove Swivel Counter Height Barstool (Model DWG-914-B) is designed for indoor use at counter heights ranging from 33 to 36 inches. This set includes two barstools, each featuring a cappuccino stained wood frame and backrest, complemented by a durable white leatherette seat. The barstools are equipped with a 360-degree swivel function for enhanced usability.

Image 1.1: Two CorLiving Woodgrove barstools. These barstools feature a cappuccino stained wood finish and white leatherette seats, designed for counter-height use.

• Frame and Backrest: Cappuccino stained wood.
• Seat Height: 24 inches, suitable for 33-36 inch counter height bars.
• Seat Material: Durable White Leatherette.
• Quantity: Sold as a set of 2.
• Functionality: Swivels 360 degrees.

2. Safety Information

Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Weight Limit: Do not exceed the maximum weight recommendation of 264 pounds (120 kg) per barstool.
• Assembly: Ensure all components are properly assembled and tightened before use. Periodically check and re-tighten all fasteners.
• Footrest: Use the footrest with caution to avoid tripping hazards. Do not stand on the footrest.
• Stability: Place the barstool on a flat, level surface to prevent tipping.
• Children: Keep children away from the assembly area. Do not allow children to play on or around the barstool unsupervised.
• Moving: When moving the barstool, lift it rather than dragging it to prevent damage to the legs or floor.

3. Package Contents

Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Each set includes components for two (2) barstools. The typical package for one barstool includes:

• Seat Assembly (1)
• Backrest (1)
• Legs (4)
• Footrest Rings (2)
• Hardware Pack (bolts, washers, nuts, Allen wrench)

Note: The exact number and type of fasteners may vary. Refer to the included hardware diagram in your physical manual for precise details.

4. Setup and Assembly Instructions

Assembly is required for this product. It is recommended to assemble the barstools on a soft, clean surface to prevent scratching. Two people may be required for easier assembly.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Check against the package contents list.
2. Attach Backrest to Seat: Align the backrest with the pre-drilled holes on the seat assembly. Secure using the provided bolts and washers. Do not fully tighten yet.
3. Attach Legs: Connect each leg to the underside of the seat assembly. Ensure the legs are oriented correctly, with the wider part facing outwards. Secure with bolts and washers. Do not fully tighten.
4. Install Footrest Rings: Attach the two footrest rings between the legs. The rings should be positioned at the designated height. Secure with bolts and nuts.
5. Final Tightening: Once all components are loosely assembled, place the barstool upright on a level surface. Apply gentle downward pressure to ensure all parts are seated correctly. Then, systematically tighten all bolts and nuts using the provided Allen wrench. Do not overtighten.
6. Test Stability: Gently rock the barstool to ensure it is stable and does not wobble. If wobbling occurs, loosen the fasteners slightly, adjust, and re-tighten.

Image 4.1: Dimensional diagram of the barstool. This image provides key measurements for assembly and placement.

5. Operating Instructions

The CorLiving Woodgrove barstool is designed for simple and comfortable use.

• Swivel Function: The seat of the barstool swivels 360 degrees. To rotate, simply apply gentle pressure to the seat in the desired direction. Ensure there are no obstructions around the barstool before swiveling.
• Seating: Sit centrally on the seat for optimal balance and comfort. Avoid leaning excessively to one side while swiveling.
• Footrest: Utilize the integrated footrest for added comfort and support.

Image 5.1: Detailed view of a single barstool. This image shows the seat and backrest design, emphasizing the swivel mechanism beneath the seat.

6. Maintenance and Care

Proper care will extend the life and appearance of your barstools.

• Cleaning Wood Frame: Wipe the wood frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as they can damage the finish. Dry immediately with a clean cloth.
• Cleaning Leatherette Seat: The white leatherette seat is easy to wipe clean. Use a soft cloth dampened with mild soap and water. Wipe dry thoroughly. Do not use solvents or strong detergents.
• Hardware Check: Periodically check all bolts and fasteners to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the wood finish and leatherette.
• Spills: Clean spills immediately to prevent staining.

7. Troubleshooting

If you encounter any issues with your barstool, refer to the following common solutions:

8. Specifications

9. Warranty and Support

CorLiving products are manufactured with quality and care. For specific warranty information, please refer to the warranty card included with your purchase or visit the official CorLiving website.

If you require assistance with assembly, missing parts, or have any questions regarding your CorLiving Woodgrove barstools, please contact CorLiving customer support:

• Website: www.corliving.com (Please check for the most current contact information)
• Customer Service: Refer to the contact section on the CorLiving website for phone numbers or email support.

Please have your model number (DWG-914-B) and purchase information ready when contacting support.