GEEKRIA Beats Solo Wireless (Solo-Bluetooth) (810-00012-00) (810-00012-01) Compatible Earpads
Contents
Geekria Replacement Ear Pads for Beats Solo Wireless Headphones - Instruction Manual
1. Introduction
This instruction manual provides guidance for the installation and care of your new Geekria Replacement Ear Pads. These ear pads are designed to restore comfort and sound quality to your compatible headphones.

A pair of white Geekria replacement ear pads, designed for Beats Solo Wireless headphones, displayed alongside a headphone and a small pry tool for installation.
2. Compatibility
These replacement ear pads are compatible with the following headphone models:
- Beats Solo Wireless (Solo-Bluetooth) (810-00012-00)
- Beats Solo Wireless (Solo-Bluetooth) (810-00012-01)
While designed for these specific models, they may also fit other headphones. Please refer to the dimensions provided in the specifications section to verify compatibility with other models.
3. Package Contents
Your package includes:
- 2 x Geekria Replacement Ear Pads
4. Setup (Installation)
Follow these steps to replace your headphone ear pads:
- Step 1: Remove the Old Ear Pads. Carefully pry off the existing ear pads from your headphones. A small, flat tool (often included with replacement kits) can assist in gently separating the old pad from the ear cup.
- Step 2: Align the New Ear Pads. Position the new replacement ear pad over the headphone's ear cup. Ensure that any internal clips or alignment points on the ear pad match those on the headphone.
- Step 3: Mount the Ear Pad. Gently press the new ear pad onto the ear cup, working your way around the circumference. Ensure the edges are securely seated.
- Step 4: Secure the Ear Pads. Apply firm, even pressure around the entire ear pad to ensure it is fully snapped into place and securely attached to the headphone.
For a visual demonstration, please refer to the installation video below:

This image illustrates the four key steps for replacing the ear pads: 1. Pry off the existing earpad. 2. Align the mounting points of the ear cup and new earpad. 3. Mount the new earpad onto the ear cup. 4. Press to secure the ear pads.
An official video guide from GeekriaDirect demonstrating the step-by-step process of replacing ear pads on Beats Solo Wireless headphones. This video covers removing old ear pads, aligning new ones, and securing them properly.
5. Operating
Once installed, your new ear pads are ready for use. Ensure they are comfortably seated around your ears for optimal sound isolation and listening experience. The high-quality memory foam and protein leather are designed for enhanced comfort during extended listening sessions.
6. Maintenance
To prolong the life of your ear pads, follow these maintenance tips:
- Wipe them regularly with a soft, dry cloth to remove dust and oils.
- For deeper cleaning, a slightly damp cloth with mild soap can be used. Ensure to dry thoroughly immediately after cleaning.
- Avoid using harsh chemicals, abrasive materials, or excessive moisture, as these can damage the material.
- Store your headphones in a clean, dry place when not in use to prevent premature wear.
7. Troubleshooting
If you encounter any issues with your replacement ear pads, please refer to the following common solutions:
- Ear Pads Do Not Fit: Double-check the compatibility list and the dimensions of your headphones against the product specifications. Ensure the ear pads are correctly aligned and all mounting points are engaged during installation.
- Sound Quality Issues: Ensure the ear pads are fully sealed against the ear cups. Improper installation can lead to sound leakage and reduced audio performance. Re-installing the ear pads carefully may resolve this.
- Discomfort: New ear pads may require a short break-in period to conform to your ears. If discomfort persists, ensure they are correctly positioned on your ears and that the headphone headband is adjusted properly.
8. Specifications
| Brand | GEEKRIA |
| Material | High-quality memory foam and protein leather |
| Color | White |
| Unit Count | 2.0 Count |
| Product Dimensions (L x W x H) | 2.76 x 2.76 x 0.39 inches (approximately 7 x 7 x 1 cm) |
| Item Weight | 0.353 ounces |
| Item Model Number (Earpads) | FBA_EJZ-0011-02 |
| Compatible Headphone Models | Beats Solo Wireless (Solo-Bluetooth) (810-00012-00), Beats Solo Wireless (Solo-Bluetooth) (810-00012-01) |

Detailed measurements of the replacement ear pad, indicating a diameter of approximately 7 cm (2.76 inches) and a thickness of about 1 cm (0.39 inches).
9. Warranty & Support
Geekria offers a SureFit Guarantee. We are committed to ensuring your complete peace of mind when shopping for any earpad we offer. If you encounter any issues with compatibility, fit, or have made a mistake matching your headphone type, please contact Geekria customer support for assistance.
For further support, please visit the official Geekria website or refer to the contact information provided with your purchase.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.