Armitron Sport Women's 25/6416 Easy To Read Dial Resin Strap Watch User Manual

Introduction

This manual provides essential instructions for the setup, operation, and maintenance of your Armitron Sport Women's 25/6416 Easy To Read Dial Resin Strap Watch. Please read this guide thoroughly to ensure proper use and longevity of your timepiece.

Image: Front view of the Armitron Sport Women's 25/6416 watch, featuring a black resin strap, silver-tone case, and a white dial with black Arabic numerals.

Setup

Setting the Time and Date

1. Pull out the crown: Locate the small knob (crown) on the right side of the watch case. Gently pull it out to the first or second click position (depending on the model, one click for time, two for date).
2. Adjust the time: Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
3. Adjust the date (if applicable): If your watch has a date function, pull the crown out to the appropriate position and rotate it to set the correct date.
4. Push in the crown: Once the time and date are set, push the crown back into its original position to start the watch movement and ensure water resistance.

Wearing the Watch

The watch features a durable resin strap with a buckle closure. Adjust the strap to a comfortable fit on your wrist, ensuring it is not too tight or too loose. The strap should allow for slight movement without rotating freely around your wrist.

Image: The Armitron Sport Women's 25/6416 watch displayed on a wrist, showcasing its fit and appearance.

Operating the Watch

Reading the Time

The watch features an easy-to-read analog display with clear Arabic numerals (1-12) and luminous square markers for enhanced visibility in low light conditions. The silver-tone hour and minute hands, along with a red second hand, provide precise timekeeping.

Water Resistance

This watch is water-resistant to 100 meters (330 feet). This makes it suitable for snorkeling, as well as swimming. It is not recommended for scuba diving.

Always ensure the crown is fully pushed in to maintain water resistance. Avoid operating the crown or buttons while the watch is wet or submerged.

Maintenance and Care

Cleaning Your Watch

To clean your watch, wipe the case and strap with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or resin components.

Battery Replacement

The watch is powered by a Japanese-Quartz movement and requires a product-specific battery (included). When the battery needs replacement, it is recommended to take the watch to a qualified watch technician to ensure proper sealing and maintain water resistance. Some users have successfully replaced batteries themselves, noting that the watch may contain two batteries (a larger CR1220 for the backlight and a smaller 377/376 for the movement), and care must be taken to re-seal the case properly.

Storage

When not in use, store your watch in a cool, dry place away from direct sunlight and extreme temperatures. This helps preserve the integrity of the resin strap and the watch's internal components.

Troubleshooting

• Watch not running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
• Time is incorrect: Follow the "Setting the Time and Date" instructions to reset the time.
• Condensation inside the crystal: This may indicate a loss of water resistance. Have the watch inspected by a professional immediately to prevent further damage.

Specifications

Product Videos

Warranty and Support

For detailed warranty information and customer support, please refer to the documentation included with your purchase or visit the official Armitron website. Keep your proof of purchase for any warranty claims.