UPBRIGHT Skyworth SLC-2219A-3S Car DC Charger

UpBright 3-Pin DIN Car 12V DC Adapter User Manual

Model: Skyworth SLC-2219A-3S Car DC Charger

1. Introduction

This manual provides essential instructions for the safe and effective use of your UpBright 3-Pin DIN Car 12V DC Adapter. This adapter is designed to provide 12V DC power from a vehicle's cigarette lighter socket to compatible electronic devices, such as portable televisions and monitors. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

  • Ensure the adapter's voltage and current ratings match the requirements of your device. Using an incompatible adapter can damage your device.
  • Do not expose the adapter to moisture, rain, or extreme temperatures.
  • Avoid physical damage to the cable and connectors. Do not bend, twist, or pull the cable excessively.
  • Disconnect the adapter from the power source when not in use.
  • Keep out of reach of children.
  • If the adapter appears damaged or malfunctions, discontinue use immediately.

3. Product Overview

The UpBright 3-Pin DIN Car 12V DC Adapter consists of a standard vehicle cigarette lighter plug on one end and a 3-pin DIN connector on the other, connected by a durable power cable. It is designed for use in cars, boats, and RVs to power compatible 12V DC devices.

UpBright 3-Pin DIN Car 12V DC Adapter

Figure 1: The UpBright 3-Pin DIN Car 12V DC Adapter, showing the cigarette lighter plug, cable, and 3-pin DIN connector.

Cigarette Lighter Plug

Figure 2: Close-up view of the cigarette lighter plug, designed to fit standard vehicle power outlets.

3-Pin DIN Connector

Figure 3: Close-up view of the 3-pin DIN connector, which connects to the compatible electronic device.

4. Setup Instructions

  1. Verify Compatibility: Before connecting, ensure your device requires a 12V DC input and uses a 3-pin DIN connector. Refer to your device's manual for power specifications.
  2. Connect to Device: Insert the 3-pin DIN connector end of the UpBright adapter firmly into the corresponding power input port on your electronic device.
  3. Connect to Vehicle Power: Insert the cigarette lighter plug end of the adapter into your vehicle's 12V DC accessory power socket (cigarette lighter socket). Ensure a secure connection.
  4. Power On: Once both ends are securely connected, power on your electronic device.

5. Operating Instructions

The UpBright 3-Pin DIN Car 12V DC Adapter operates by converting the vehicle's 12V DC power into a stable 12V DC output for your connected device. No additional controls or adjustments are required on the adapter itself.

  • Ensure the vehicle's engine is running or the accessory power socket is active to provide power.
  • Monitor your device for proper operation after connecting the adapter.
  • If your device has a power indicator, confirm it illuminates to show power reception.

6. Maintenance

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures when not in use. Avoid tangling the cable.
  • Inspection: Periodically inspect the cable and connectors for any signs of wear, cuts, or damage. If damage is observed, replace the adapter.

7. Troubleshooting

ProblemPossible CauseSolution
Device does not power on.
  • Adapter not fully inserted.
  • Vehicle power socket is not active.
  • Device is incompatible.
  • Blown fuse in vehicle's power socket.
  • Damaged adapter.
  • Ensure both ends of the adapter are securely connected.
  • Check if the vehicle's ignition is on or if the socket requires activation.
  • Verify device power requirements and connector type.
  • Consult your vehicle's manual to check and replace the fuse for the accessory power socket.
  • Inspect the adapter for damage. If damaged, replace it.
Intermittent power.
  • Loose connection.
  • Damaged cable.
  • Ensure all connections are tight.
  • Inspect the cable for cuts or fraying. Replace if damaged.

8. Specifications

FeatureDetail
BrandUPBRIGHT
Model NumberSkyworth SLC-2219A-3S Car DC Charger
Input Voltage12 Volts (DC)
Output Voltage12 Volts (DC)
Output Current0.5 Amps
Wattage50 watts
Connector Type3-Pin DIN
Product Dimensions6 x 2 x 1 inches
Item Weight3.2 ounces
CertificationsCE, FCC, UL

9. Warranty and Support

UpBright offers a 30-day refund policy and a 24-month exchange program for this product. For warranty claims or technical assistance, please refer to your purchase documentation or contact the retailer where the product was acquired.

10. Compatible Devices

This UpBright 3-Pin DIN Car 12V DC Adapter is compatible with a wide range of devices requiring a 12V DC input and a 3-pin DIN connector. This includes, but is not limited to, the following models:

Skyworth TVs:

  • SLC-2219A
  • SLC-1919A
  • SLC-2269A
  • SLC-1963A-2
  • SLC-1971A-3C
  • SLC-1969AM
  • SLC-1969AM-3
  • SLC-1919A-3S
  • SLC-1919A-3M
  • SLC-2219A-3M
  • SLC-2269A-3C
  • SLC-2206A
  • SLC-2206A-3
  • SLC-1519A-3M
  • SLC-1519A-3S
  • SLC-1569A
  • SLC-1569A-3
  • SLC-1369A-3C
  • SLC-1369A-3M
  • SLC-1369A-3S
  • SLC-1369A-3
  • SLC-2278A-3TG

Naxa TVs:

  • NTD-1554
  • NTD-15-555
  • NTD-1552
  • NTD-1553
  • NX-556
  • NTD-1952
  • NTD-19-556
  • NTD-2252
  • NTD-2452
  • NTD-2453
  • NTD-1350
  • NTD-1351
  • NTD-1355
  • NTD-1352
  • NT-2407
  • NT-2202
  • NT-2207
  • NT-2208
  • NTD-2254
  • NT-1506
  • NT-1507
  • NT-1508
  • NT-1307
  • NT-1308
  • NTD-1353
  • NTD-1354
  • NT-1902
  • NTD-1953
  • NTD-1954
  • NX-550
  • NX-551
  • NX-553
  • NX-555
  • NX-556
  • NX-563

Jewel:

  • JS-12050-3S
  • JS-12050-2K

Note: This list is not exhaustive. Always verify the power requirements and connector type of your specific device before use.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.