1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Tyger Auto T3 Soft Tri-fold Truck Bed Tonneau Cover. Please read these instructions thoroughly before proceeding with installation or use to ensure proper fitment and functionality.
The Tyger Auto T3 Soft Tri-fold Tonneau Cover is designed to provide protection for your truck bed cargo. It features a durable marine-grade vinyl cover and an aircraft-grade aluminum frame.
Compatibility: This product is compatible with 2002-2018 Dodge Ram 1500, 2003-2025 Ram 2500/3500, and 2019-2025 Classic models equipped with a 6'4" (76") bed. It is designed for models without a Utility Track System and is not compatible with RamBox systems.
Image 1.1: Tyger Auto T3 Soft Tri-fold Tonneau Cover installed on a truck bed.
Image 1.2: Diagram illustrating truck bed length measurement for compatibility. This model is for 6'4" (76") beds.
2. What's in the Box
Verify that all components are present before beginning installation:
- Cover assembly
- Mounting clamps
- Safety clamps
- Cargo management system brackets (if applicable to your vehicle model)
- Weather seal strip (if applicable to your vehicle model)
3. Setup and Installation
The Tyger Auto T3 Soft Tri-fold Tonneau Cover is designed for easy, no-drilling installation. Follow these steps carefully:
- Unpack and Inspect: Carefully remove all components from the packaging. Inspect the cover and hardware for any damage.
- Position the Cover: Place the cover assembly onto the truck bed rails, ensuring the front section is aligned with the bulkhead of the truck bed. The cover should be centered side-to-side.
- Secure Front Clamps: Attach the front mounting clamps to the underside of the truck bed rails, securing the front section of the cover. Ensure the clamps are tight and the cover is firmly in place.
- Unfold and Align: Carefully unfold the middle and rear sections of the tonneau cover. Ensure the cover is properly aligned with the truck bed rails and the tailgate.
- Secure Rear Clamps: Attach the rear mounting clamps to the underside of the truck bed rails, securing the rear section of the cover. Tighten all clamps to ensure a secure fit.
- Install Safety Clamps: Attach the safety clamps as instructed in the detailed installation guide (refer to the PDF document). These provide additional security.
- Bedliner Modification (if applicable): For vehicles equipped with an over-the-bedrail bedliner, small cuts may be necessary in the bedliner to allow the clamps to properly secure the cover. Under-the-bedrail bedliners typically do not require modification.
- Weather Seal Strip: If provided, apply the weather seal strip to areas where there might be gaps between the cover and the truck bed, particularly near the tailgate, to enhance water resistance.
Image 3.1: Visual guide for the easy installation process of the tri-fold tonneau cover.
Image 3.2: Detail of the clamps and latches for securing the cover.
4. Operating Instructions
The tri-fold design allows for convenient access to your truck bed.
- To Open (Fold):
- Release the rear clamps located near the tailgate.
- Fold the rear section of the cover forward onto the middle section.
- If full bed access is required, release the middle section clamps and fold both sections forward onto the front section.
- Secure the folded cover using the integrated safety buckles or straps to prevent it from unfolding during transit.
- To Close (Unfold):
- Release the safety buckles/straps.
- Carefully unfold the sections back over the truck bed.
- Ensure each section lays flat and is properly aligned.
- Re-engage all clamps to secure the cover to the truck bed rails.
Image 4.1: Safety buckles for securing the folded cover.
Image 4.2: The cover can be folded back for partial or full bed access.
5. Maintenance
Regular maintenance will extend the life and appearance of your tonneau cover.
- Cleaning the Vinyl: Clean the marine-grade vinyl cover regularly with mild soap and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the material. Rinse thoroughly and allow to air dry.
- Frame and Hardware: Periodically check the aluminum frame and all mounting hardware for tightness. Tighten any loose bolts or clamps to ensure the cover remains secure.
- Weather Seals: Inspect the weather seals around the edges of the cover for wear or damage. Replace any compromised seals to maintain water resistance.
- UV Protection: Consider using a UV protectant specifically designed for vinyl to prevent fading and cracking from sun exposure.
Image 5.1: The cover is made from durable, tear-resistant vinyl.
Image 5.2: The cover features a robust aluminum frame.
6. Troubleshooting
This section addresses common issues you might encounter.
- Water Leakage:
- Ensure all clamps are securely tightened.
- Verify the cover is centered and properly aligned on the truck bed rails.
- Check the condition of the weather seals. If damaged or worn, they may need replacement.
- For some truck models, additional weather stripping may be required at the bulkhead or tailgate to create a tighter seal.
- Cover Not Lying Flat:
- Ensure the cover is correctly positioned and all sections are fully extended.
- Check for any obstructions in the truck bed or on the rails that might prevent the cover from sitting flush.
- Difficulty Folding/Unfolding:
- Ensure all clamps are fully released before attempting to fold the cover.
- Check for any debris or obstructions along the folding hinges.
Image 6.1: The cover is designed for all-weather protection, but proper installation and sealing are crucial for optimal performance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Tyger Auto |
| Model | TYGER T3 (TG-BC3D1011) |
| Style | T3 Soft Tri-Fold |
| Exterior Finish | Vinyl |
| Material | Aluminum, Stainless Steel, Vinyl |
| Lock Type | Tailgate |
| Item Weight | 27.4 pounds |
| Product Dimensions | 79.29 x 71.14 x 1.38 inches |
| Special Features | Tear-resistant, Weather-proof, heavy-duty, light-weight |
| UPC | 816239020555 |
8. Warranty Information
This Tyger Auto T3 Soft Tri-fold Truck Bed Tonneau Cover comes with a LIMITED LIFETIME WARRANTY for US customers. For specific terms and conditions, please refer to the official warranty documentation provided with your purchase or contact Tyger Auto customer support.
9. Support and Additional Resources
For further assistance or detailed installation guides, please refer to the following resources:
- Installation Manual (PDF): Download PDF
- User Guide (PDF): Download PDF
- Manufacturer: Tyger Auto
- Online Store: Visit the Tyger Auto Store on Amazon
