1. Introduction
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Blue Wave Riviera 24-ft Round 54-in Deep Above Ground Swimming Pool. The Riviera pool package is designed for lasting durability and enjoyment, featuring a robust steel wall construction, a high-efficiency sand filter system, a secure A-frame ladder, and a complete maintenance kit. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Figure 1: Blue Wave Riviera Round Pool Package Overview
2. Safety Information
Your safety is paramount. Failure to follow these safety guidelines can result in serious injury or death. Always supervise children and individuals with limited swimming abilities. This pool is not intended for diving.
General Safety Precautions:
- Adult Supervision: Never leave children unattended in or near the pool.
- No Diving: The pool depth is not suitable for diving. Diving can cause severe injury.
- Electrical Safety: Ensure all electrical components (pump, filter) are properly grounded and connected to a GFCI-protected outlet. Keep electrical cords away from water.
- Chemical Handling: Store pool chemicals safely, out of reach of children and pets. Follow manufacturer instructions for chemical dosage and handling.
- Ladder Safety: Always use the provided A-frame ladder for entry and exit. Ensure it is stable before use. Lock or remove the ladder when the pool is not in use to prevent unsupervised access.
- Fencing: Consider installing a fence or barrier around the pool area to prevent unauthorized access.
3. Package Contents
Verify that all components listed below are present in your package before beginning assembly. If any parts are missing or damaged, contact customer service immediately.
- Steel Wall Pool Structure (24-ft Round, 54-in Deep)
- Sand Filter System (with 1-HP dual-speed pump)
- A-Frame Ladder
- Overlap Liner
- Skimmer
- Maintenance Kit (Leaf Bagger Vacuum, Vacuum Head, Skimmer Net, Telescopic Pole, Nylon Wall Brush, Vinyl Liner Vacuum Head, 3-Piece 12-ft Pole & Thermometer, 25-ft Vacuum Hose)
- Instruction Manual
Figure 2: Complete Pool Package Components
4. Setup Instructions
The Blue Wave Riviera pool is designed for easy DIY installation. Follow the detailed instructions provided in the separate assembly guide included with your package. Below is a general overview of the main components and their features.
4.1 Pool Structure Assembly
The pool features galvanized steel walls with a zinc-aluminum coating for rust resistance. The 8-inch resin top rails, uprights, and top caps are infused with sun exposure inhibitors for enhanced durability.
Figure 3: Pool Dimensions and Structural Components
Figure 4: Detailed View of Pool Wall Construction
4.2 Sand Filter System Installation
The Sandman filter system includes a 1-HP dual-speed pump designed for efficient water circulation and filtration. Refer to the separate Sand Filter System manual for detailed installation and operation instructions.
Figure 5: Sandman Sand Filter System Features
Figure 6: Sandman Filter System Detailed Specifications
Figure 7: Sandman Sand Filter System
4.3 A-Frame Ladder Installation
The heavy-duty resin A-frame ladder provides safe and stable entry and exit. It supports up to 250 lbs and features flip-up steps for security when not in use. Assemble the ladder according to the instructions provided in its dedicated manual.
Figure 8: A-Frame Ladder Features and Dimensions
Figure 9: A-Frame Pool Ladder
5. Operating Instructions
Once the pool is assembled and filled, and the filter system is installed, you can begin operation.
5.1 Filter Pump Operation
The Sandman filter pump circulates water at 3,720 gallons per hour, ensuring clean water. It has a 16,000-gallon turnover rate. Operate the pump daily for several hours to maintain water clarity. Consult the Sand Filter System manual for detailed instructions on pump settings and the 6-position valve.
5.2 Skimmer Function
The wide-mouth skimmer efficiently removes debris from the water surface. Regularly empty the skimmer basket to ensure optimal performance and prevent clogging.
Figure 10: Wide-Mouth Pool Skimmer
6. Maintenance
Regular maintenance is crucial for extending the life of your pool and ensuring clean, safe swimming water.
6.1 Water Chemistry
Test your pool water regularly (daily or every other day) for pH, chlorine, and alkalinity levels. Adjust chemicals as needed to maintain balanced water. Refer to a reputable pool chemical guide for proper levels and treatment.
6.2 Filter Maintenance
The sand filter holds 110 lbs of sand to capture dirt and debris. Backwash the filter regularly as indicated by pressure gauge readings or reduced flow. Replace the filter sand every 3-5 years, or as recommended by the filter manufacturer.
6.3 Pool Cleaning
Use the included maintenance kit to keep your pool clean:
- Leaf Skimmer: Remove leaves and large debris from the surface daily.
- Vacuum Head & Hose: Connect to your filter system to vacuum the pool floor as needed.
- Nylon Wall Brush: Brush the pool walls and floor weekly to prevent algae growth.
- Telescopic Pole: Use with the skimmer net, brush, and vacuum head.
Figure 11: Complete Maintenance Kit
Figure 12: Pool Cleaning Essentials
Figure 13: Maintenance Kit Components
6.4 Winterization
Before freezing temperatures arrive, properly winterize your pool to prevent damage. This typically involves balancing water chemistry, lowering the water level, draining and storing equipment, and covering the pool. Refer to specific winterization guides for your climate.
7. Troubleshooting
This section addresses common issues you might encounter with your above ground pool.
7.1 Cloudy Water
- Check Filter: Ensure the filter pump is running for adequate hours and the sand is clean. Backwash or replace sand if necessary.
- Test Water: Imbalanced water chemistry (pH, alkalinity, chlorine) can cause cloudiness. Adjust chemicals as needed.
- Circulation: Ensure skimmer and return jets are clear and water is circulating properly.
7.2 Pump Not Operating
- Power Supply: Check if the pump is plugged in and the outlet has power (test with another appliance). Check GFCI breaker.
- Motor Overload: Allow the motor to cool down if it has overheated.
- Clogs: Inspect the pump basket and impeller for debris.
7.3 Leaks
- Liner: Inspect the pool liner for tears or punctures. Patch kits are available for minor repairs.
- Connections: Check all hose connections to the pump, filter, and skimmer for tightness.
- Skimmer/Return: Inspect the skimmer and return fittings for cracks or loose gaskets.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Blue Wave |
| Model | Riviera |
| Shape | Round |
| Product Dimensions (L x W x H) | 288"L x 288"W x 54"H (24-ft Diameter x 54-in Deep) |
| Water Capacity | 13,500 Gallons (14,273 Gallons listed in specifications) |
| Material Type | Alloy Steel, Resin |
| Item Weight | 415 Pounds |
| Filter Pump | 1-HP Dual-Speed Sand Filter Pump |
| Filter Turnover Rate | 16,000 Gallons |
| Pump Circulation Rate | 3,720 Gallons/Hour |
| Sand Capacity | 110 lbs |
| Ladder Weight Capacity | 250 lbs |
| UPC | 672875400508 |
9. Warranty and Support
The Blue Wave Riviera Above Ground Swimming Pool is backed by a 30-year limited warranty. For specific details regarding warranty coverage, claims, or technical support, please refer to the warranty documentation included with your product or contact Blue Wave Products customer service directly.
Figure 14: 30-Year Limited Warranty Badge