1. Product Overview
The WAC Lighting DS-WD05-F27A-BZ is a 5-inch double-sided tube arch wall mount fixture designed for outdoor and indoor applications. This LED fixture provides illumination in two directions, away from the wall, with a color temperature of 2700K and a Color Rendering Index (CRI) of 85. It features durable aluminum construction and is rated for wet locations (IP65), making it suitable for various environments. The fixture is Energy Star rated and ETL & CETL listed, ensuring energy efficiency and safety compliance.
Key features include:
- Double-sided light output, up to 3685 lumens per side.
- 2700K warm white light with 85 CRI for accurate color representation.
- 100% - 10% dimming capability.
- Long rated life of 80,000 hours.
- IP65 wet location listed for outdoor durability.
- Energy Star rated for energy efficiency.
- Aluminum construction for longevity.
- Free of projected heat and UV radiation.
- ANSI compliant warm/neutral LED bins for consistent color.
Figure 1: WAC Lighting DS-WD05-F27A-BZ 5-Inch Double Side Tube Arch Wall Mount in Bronze finish.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- Read all instructions carefully before installation.
- Installation must be performed by a qualified electrician in accordance with local electrical codes and the National Electrical Code (NEC).
- Ensure the supply voltage is 120 Volts, as specified for this fixture.
- Do not modify the fixture or use it for purposes other than its intended use.
- Wear appropriate safety gear, including safety glasses and gloves, during installation.
- Keep flammable materials away from the fixture during operation.
3. Installation and Setup
This section provides general guidelines for installing the WAC Lighting DS-WD05-F27A-BZ wall mount fixture. Specific details may vary based on your installation environment. Always consult local building and electrical codes.
- Prepare the Installation Area:
- Turn off power at the circuit breaker or fuse box to the wall switch or outlet box where the fixture will be installed.
- Ensure the mounting surface is clean, dry, and structurally sound to support the fixture's weight (approximately 9 pounds).
- Mount the Fixture:
- Attach the mounting bracket (if separate) to the electrical junction box using the provided screws.
- Connect the electrical wires:
- Connect the black wire from the fixture to the black (hot) wire from the junction box.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box.
- Secure all connections with wire nuts.
- Carefully tuck the wires into the junction box.
- Align the fixture with the mounting bracket and secure it using the provided screws.
- Final Checks:
- Ensure the fixture is securely fastened to the wall.
- Restore power at the circuit breaker or fuse box.
- Test the fixture to ensure it operates correctly.
Figure 2: Dimensional drawings for various WAC Lighting tube architectural wall mounts, including the DS-WD05 model.
Figure 3: Illustration of the double-sided light distribution pattern, with light directed away from the wall.
4. Operating Instructions
The WAC Lighting DS-WD05-F27A-BZ fixture is designed for simple operation once installed.
- Power On/Off: Control the fixture using a standard wall switch connected to the electrical circuit.
- Dimming: This fixture is dimmable from 100% down to 10%. Use a compatible LED dimmer switch (sold separately) for dimming functionality. Consult the dimmer manufacturer's instructions for proper installation and operation.
Figure 4: Example of the WAC Lighting fixture used in an architectural setting, providing ambient and functional illumination.
5. Maintenance
The WAC Lighting DS-WD05-F27A-BZ is designed for minimal maintenance due to its long-life LED technology.
- Cleaning:
- Before cleaning, ensure the power to the fixture is turned off at the circuit breaker.
- Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish or electrical components.
- Ensure the fixture is completely dry before restoring power.
- LED Light Source: The integrated LED light source is designed to last for 80,000 hours and is not user-replaceable. If the LED fails, contact WAC Lighting customer support for assistance.
6. Troubleshooting
If you experience issues with your WAC Lighting fixture, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. |
|
|
| Light flickers or dims unexpectedly. |
|
|
| Fixture is hot to the touch. |
|
|
If the problem persists after attempting these solutions, please contact WAC Lighting customer support.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | WAC Lighting |
| Model Number | DS-WD05-F27A-BZ |
| Color | Bronze |
| Style | 2700K (80+CRI) |
| Light Fixture Form | Wall |
| Power Source | Corded Electric |
| Light Source Type | LED |
| Finish Type | Bronze |
| Shade Material | Glass |
| Voltage | 120 Volts |
| Lighting Method | Up/Down Light (Away from Wall) |
| Specification Met | Energy Star; UL Listed |
| Item Weight | 9 Pounds |
| Brightness | 3120 Lumens (per side, up to 3685x2) |
| Product Dimensions | 7.61 x 5.53 x 5.54 inches |
| Rated Life | 80,000 Hours |
| IP Rating | IP65 (Wet Location Listed) |
Figure 5: Manufacturer's specification sheet detailing various models and their light directions.
8. Warranty and Support
This WAC Lighting product comes with a manufacturer's warranty. For specific details regarding your warranty coverage, please refer to the documentation included with your purchase or visit the official WAC Lighting website.
Warranty Description: 5 years.
For technical support, troubleshooting assistance, or warranty claims, please contact WAC Lighting customer service. You can find more information and contact details on the WAC Lighting Store.
