iStorage IS-FL-DAP-DB-8

iStorage datAshur Personal USB Drive User Manual

Model: IS-FL-DAP-DB-8

Introduction

The iStorage datAshur Personal is a PIN authenticated, hardware encrypted USB 3.0 flash drive designed to secure your data. This manual provides instructions for its setup, operation, and maintenance. Key features include 256-bit AES hardware encryption (CBC mode) and PIN access, ensuring robust data protection.

Setup

Initial Setup and Admin PIN Creation

  • Charge the device: Before initial use, ensure the datAshur Personal is charged by connecting it to a powered USB port for approximately 30-60 minutes. The red LED will illuminate during charging and turn off when fully charged.
  • Power On: Press the KEY button once. The red and green LEDs will flash alternately.
  • Set Admin PIN: Within 10 seconds, press the KEY button twice. The red LED will be solid. Enter a new Admin PIN (7-15 digits). Press the KEY button. Re-enter the Admin PIN. Press the KEY button again. A solid green LED indicates successful Admin PIN creation. If the red LED flashes, the PINs did not match or the process timed out; repeat from step 2.

Unlocking the Drive for First Use

  • Connect the drive to a USB port.
  • Press the KEY button. The red and green LEDs will flash alternately.
  • Enter your Admin PIN.
  • Press the KEY button. A solid green LED indicates the drive is unlocked and ready for use. The drive will appear as a removable storage device on your computer.
iStorage datAshur Personal USB drive with its keypad visible, angled view.

The iStorage datAshur Personal features a 10-digit keypad for PIN entry and LED indicators for status.

iStorage datAshur Personal USB drive with the protective cap removed, revealing the USB connector and the keypad with illuminated LEDs.

The USB connector is revealed by removing the protective cap. LED indicators show the drive's status, such as locked or unlocked.

Operating

Connecting and Accessing Data

  • Unlock the drive using your PIN as described in the Setup section.
  • Once the green LED is solid, insert the drive into a USB port on your computer or compatible device.
  • The drive will be recognized as a standard USB storage device.
  • Transfer files to and from the drive as you would with any other USB flash drive.

Locking the Drive

  • To lock the drive, safely eject it from your operating system.
  • Once ejected, press the KEY button. The red LED will illuminate, indicating the drive is locked.
  • Alternatively, the drive will automatically lock after a period of inactivity (default is 30 minutes, configurable via Admin mode).
The datAshur Personal USB drive connected to a smartphone via an OTG adapter, with the drive's keypad visible.

The datAshur Personal can be connected to various devices, including smartphones, using appropriate adapters.

The datAshur Personal USB drive plugged into the side USB port of a laptop, with the keypad facing upwards.

Easily connect the datAshur Personal to your laptop's USB port for secure data access.

Maintenance

General Care

  • Keep the drive clean and free from dust and debris.
  • Avoid exposing the drive to extreme temperatures, direct sunlight, or moisture.
  • Do not attempt to disassemble the drive, as this will void the warranty and may damage the device.

PIN Security

  • Never share your Admin or User PINs.
  • Store your PIN in a secure, memorable location, separate from the drive.
  • Change your PIN regularly for enhanced security.

Troubleshooting

LED Indicator Meanings

  • Solid Red: Drive is locked.
  • Solid Green: Drive is unlocked and ready for use.
  • Flashing Red/Green: Awaiting PIN entry.
  • Flashing Red: Incorrect PIN entered or error during setup.
  • Solid Blue: Admin mode activated.

Drive Not Recognized

  • Ensure the drive is properly unlocked (solid green LED).
  • Try connecting to a different USB port or computer.
  • Check your computer's device manager or disk management for the drive.

Forgotten PIN

  • If the Admin PIN is forgotten, the drive cannot be unlocked, and data will be inaccessible.
  • A factory reset is possible, but it will erase all data on the drive. Refer to the full manual on the iStorage website for factory reset procedures.

Specifications

FeatureDetail
BrandiStorage
Model NumberIS-FL-DAP-DB-8
Memory Capacity8 GB
Hardware InterfaceUSB 3.0
ConnectivityUSB
ColorBlue
Item Weight20 Grams
Encryption256-bit AES Hardware Encryption (CBC Mode)
AuthenticationPIN Access
Multiple iStorage datAshur Personal USB drives in various colors arranged in a semi-circle.

The datAshur Personal is available in several colors, offering secure storage with a personalized touch.

Warranty and Support

Warranty Information

iStorage products typically come with a manufacturer's warranty. Please refer to the official iStorage website or your purchase documentation for specific warranty terms and conditions.

Technical Support

For further assistance, technical support, or to download the complete user manual, please visit the official iStorage website: www.istorage-uk.com.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.