Heat Storm Mojave Portable Infrared Space Heater

1. Introduction

The Heat Storm Mojave Portable Infrared Space Heater (Model HS-1500-IMO) is a lightweight and efficient heating solution designed for indoor use. Weighing approximately 11 lbs, this 1500-watt heater is easily portable, allowing you to move it between rooms as needed. It features a patented heat exchanger with HMS Technology, which works with room humidity to provide comfortable warmth without significantly reducing oxygen or humidity levels. The heater includes a built-in thermostat with an LED display, an energy-efficient mode, and a remote control for convenient operation.

This manual provides essential information for the safe and effective use of your Heat Storm Mojave heater, covering setup, operation, maintenance, and specifications.

Front view of the Heat Storm Mojave Portable Infrared Space Heater, highlighting its compact design and digital display.

2. Important Safety Information

READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.

WARNING: To reduce the risk of fire, electrical shock, or injury to persons, observe the following:

• Do not touch hot surfaces. Use handles or knobs if provided.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains, at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Do not use the heater in bathrooms, laundry areas, or similar indoor locations where water is present.
• Always unplug the heater when not in use.
• Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
• Do not run power cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• Use this heater only on a flat, stable surface to prevent tipping. The unit is designed with a sturdy base to minimize tipping.
• The exterior of the heater is designed to be cool to the touch, making it safer for households with children and pets. However, always supervise children and pets around operating appliances.
• This heater produces comfortable infrared heat without harmful fumes.

3. Setup

3.1 Unpacking

Carefully remove the heater from its packaging. Retain the packaging for future storage or transport. Inspect the heater for any signs of damage. If the heater appears damaged, do not use it and contact customer support.

3.2 Placement

Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the heater, especially from combustible materials like curtains, furniture, and bedding. Do not block air intakes or outlets.

Proper placement of the heater in a bedroom, ensuring adequate clearance.

3.3 Power Connection

Plug the 6-foot power cord into a standard 120V AC electrical outlet. Ensure the outlet is in good condition and not overloaded. The heater operates at 1500 watts (12.5 Amps) or 750 watts (6.25 Amps) in energy-efficient mode.

Rear view of the heater with the power cord stored in its compartment.

4. Operating Instructions

4.1 Power On/Off

Press the power button on the digital display or the remote control to turn the heater on or off. The LED display will illuminate when the unit is active.

4.2 Thermostat Control

Use the '+' and '-' buttons on the digital display or remote control to adjust the desired temperature. The LED display shows the current ambient temperature and the set temperature. The heater will cycle on and off to maintain the set temperature.

4.3 Energy Efficient Mode

Activate the energy-efficient mode to reduce the wattage from 1500 watts to 750 watts. This mode helps conserve energy while still providing supplemental heat.

4.4 Remote Control

The included remote control allows you to adjust settings from a distance, providing convenience and comfort.

4.5 Child Lock

The heater features a child lock function to prevent accidental changes to settings. Refer to the specific instructions in the full manual for activating and deactivating this feature.

4.6 Power Outage Settings Recall

In the event of a power outage, the heater is designed to recall its previous settings once power is restored, ensuring continuous comfort without manual resetting.

5. Maintenance

5.1 Cleaning

Before cleaning, always unplug the heater and allow it to cool completely. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. Ensure no water enters the interior of the heater.

5.2 Air Filter Maintenance

The heater is equipped with a lifetime air filter. Regularly check and clean the air filters located on the sides of the unit to ensure optimal performance and airflow. Dust and debris can accumulate, affecting efficiency. Refer to the full manual for detailed instructions on how to remove and clean the filters.

6. Troubleshooting

• Heater not turning on: Ensure the power cord is securely plugged into a working outlet. Check the circuit breaker.
• No heat output: Verify the thermostat setting is higher than the ambient room temperature. Ensure the energy-efficient mode is not set too low for the desired warmth.
• Heater shuts off unexpectedly: This may indicate the overheat protection sensor has activated. Unplug the unit, allow it to cool for 30 minutes, and check for any obstructions around the air intake/outlet.
• Unusual noises or smells: A new heater may emit a slight odor during initial use; this is normal and should dissipate. If unusual or strong odors/noises persist, discontinue use and contact customer support.

7. Specifications

Dimensions of the Heat Storm Mojave Portable Infrared Space Heater.

8. Warranty and Support

8.1 Manufacturer's Warranty

This Heat Storm Mojave heater comes with a 1-year manufacturer warranty. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For technical assistance, warranty inquiries, or replacement parts, please contact Heat Storm customer support. Refer to the contact information provided in your product packaging or visit the official Heat Storm website.