Product Overview
This Weber Replacement Grill Thermometer, Model 67088, is designed to accurately display the internal temperature of your gas grill in both Fahrenheit and Celsius. It is a direct replacement for the original thermometer in compatible Weber grill models.
- Replaces Weber Part 67731.
- Features a 2-3/8" diameter temperature panel.
- Prong length is 1-1/2".
- Includes the wing nut for installation.
- Designed with a tab on the back of the head to secure it in the bezel.
Image: The Weber Replacement Thermometer 67088, showing its overall design and key dimensions of 2-3/8 inches diameter and 1-3/4 inches prong length.
Compatibility
This thermometer is compatible with most Weber Genesis 300 series grills (2007-2016), Genesis II (2016+) series, and Summit (2005-2016) series gas grills. Please verify your grill model and existing thermometer specifications to ensure proper fit.
Installation Instructions
Removing the Old Thermometer
- Ensure the grill is OFF and cool before beginning.
- Open the grill lid.
- Locate the thermometer probe on the inside of the grill lid. Unscrew and remove the wing nut and washer from the probe.
- Carefully push the thermometer and bezel through from the inside of the grill lid to remove the old unit.
Image: This diagram illustrates the process of removing the existing thermometer and installing the new one. For removal, ensure the grill is off and cool, open the lid, then unscrew the wing nut and washer from the thermometer probe located on the inside of the lid. Finally, push the thermometer and its bezel out from the inside.
Installing the New Thermometer
- Place the new thermometer through the washer and the bezel at the front of the grill lid. Ensure the tab on the back of the thermometer aligns with the corresponding slot in the bezel and grill lid for proper vertical positioning.
- From the inside of the grill lid, install only one lock washer and thread the wing nut onto the thermometer probe.
- Tighten the wing nut until snug. Do not overtighten.
Image: A close-up view of the Weber thermometer, highlighting the small tab on its base which helps secure it in place, preventing rotation. The included wing nut for fastening is also visible.
Specifications
| Feature | Detail |
|---|---|
| Brand | Weber |
| Model Name | 67088 |
| Replaces Part Number | 67731 |
| Special Feature | High Accuracy |
| Color | Silver |
| Included Components | The wing nut |
| Outer Material | Metal |
| Display Type | Analog |
| Upper Temperature Rating | 700 Degrees Fahrenheit |
| Product Dimensions | 2.37 x 2.37 x 1.5 inches |
| Item Weight | 3.84 ounces |
| Diameter of Temperature Panel | 2-3/8" |
| Length of Prong | 1-1/2" |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Battery Powered |
Care and Maintenance
To ensure the longevity and accuracy of your Weber grill thermometer, wipe it clean regularly with a damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the display or metal finish.
Product Care Instructions: Wipe Clean.
Troubleshooting
Inaccurate Temperature Readings
If your thermometer provides inconsistent or inaccurate readings, first ensure it is securely installed and the probe is not obstructed. Over time, thermometers can lose calibration. If accuracy issues persist, replacement may be necessary.
Loose Thermometer
If the thermometer feels loose in the grill lid, gently tighten the wing nut from the inside of the lid until it is snug. Do not overtighten.
Warranty and Support
For questions regarding your Weber Replacement Grill Thermometer or for further support, please contact Weber customer service.
- Phone: 800-446-1071
- Email: support@weberstephen.com
Always refer to your grill's original manual for specific warranty information related to replacement parts.