Electrohome Retro Alarm Clock Radio (CR35)

1. Introduction

This retro-inspired alarm clock combines vintage aesthetics with modern functionalities. Its circular design and dual LED lighting add a stylish touch to any bedside. The CR35 is designed to enhance your morning routine and provide convenient features throughout the day.

Experience a peaceful awakening with gradual lighting that brightens as your alarm time approaches, mimicking a natural sunrise. The motion-activated night light and snooze function offer convenience in low-light conditions. Advanced features like SelfSet technology for automatic time and date settings, digital AM/FM radio with station memory, and dual alarms with weekend cancellation ensure a personalized and reliable experience.

Image: Front view of the Electrohome Retro Alarm Clock Radio (CR35) displaying the time.

2. Key Features

• Motion Activated Sensor: Night light and snooze function with gradual wake-up lighting.
• SelfSet Technology: Automatically detects the correct time/date and adjusts for Daylight Savings Time.
• WakeUp Battery Backup: Ensures the alarm sounds even during power loss.
• Digital AM/FM Radio: Features phase-locked loop tuning and 20 station memory.
• Dual Alarm: Pre-programmable daily dual alarm with weekend cancellation, allowing wake-up to radio or buzzer.
• White LED Display: Includes indoor temperature, calendar, and four dimming options (including screen-off).

Image: Electrohome CR35 with callouts for Motion Activated Night Light & Snooze, Auto Time Set & Battery Backup, and Dual Alarm with Weekend Cancellation.

3. Setup

3.1 Powering On

1. Unpack the Electrohome CR35 from its packaging.
2. Connect the power adapter to the DC IN jack on the back of the unit.
3. Plug the power adapter into a standard wall outlet.
4. For battery backup, install 2 x AAA batteries (not included) into the battery compartment. This will maintain time and alarm settings during a power outage.

3.2 Automatic Time Setting (SelfSet Technology)

Upon initial power-up, the CR35's SelfSet technology will automatically detect and set the correct time and date. Ensure the unit is placed in an area with good reception for optimal performance.

3.3 Manual Time and Date Setting

If the automatic time setting is incorrect or you wish to adjust it manually:

1. Press and hold the TIME SET button located on the top panel until the hour digits begin to flash.
2. Use the HR (Hour) and MIN (Minute) buttons to adjust the time. Pressing and holding these buttons will allow for faster adjustment.
3. Press the TIME SET button again to confirm the time. The date/year digits will begin to flash.
4. Use the HR and MIN buttons to set the current year, month, and day. Press TIME SET after each selection to move to the next.
5. Press TIME SET one last time to save all changes.

4. Operating Instructions

4.1 Setting Alarms (Dual Alarm)

The CR35 features two independent alarms (Alarm 1 and Alarm 2) that can be set for different times and days.

1. Press and hold the ALARM 1 SET or ALARM 2 SET button until the alarm hour digits flash.
2. Use the HR and MIN buttons to set the desired alarm time.
3. Press the respective ALARM SET button again to select the wake-up source (Buzzer or Radio).
4. Press the ALARM SET button once more to select the alarm schedule: Everyday, Weekdays (Mon-Fri), or Weekends (Sat-Sun).
5. Press the ALARM SET button one final time to confirm and activate the alarm. An alarm icon will appear on the display.

4.2 Motion Activated Night Light and Snooze

The CR35 is equipped with a motion sensor for convenient night light and snooze activation.

• Night Light: Wave your hand over the top of the unit to activate the night light. Wave again to turn it off.
• Snooze: When an alarm sounds, wave your hand over the top of the unit to activate the snooze function, providing extra minutes of sleep before the alarm sounds again.

Image: A hand waving over the top of the Electrohome CR35, illustrating the motion-activated feature.

4.3 Gradual Wake-up Lighting

The wake-up light feature gently increases in brightness as your alarm time approaches, providing a more natural and peaceful awakening.

Image: A sequence of three images showing the Electrohome CR35 display gradually brightening from 6:30 to 7:00.

4.4 Digital AM/FM Radio

1. Press the AM/FM button to switch to radio mode.
2. Use the TUNE +/- buttons to manually tune to a desired station. Press and hold to auto-scan for the next available station.
3. To save a station as a preset, press and hold the MEM button until the preset number flashes. Use the TUNE +/- buttons to select a preset number, then press MEM again to save.
4. To recall a preset station, briefly press the MEM button and then use the TUNE +/- buttons to select the desired preset.

4.5 Display Dimmer

Adjust the brightness of the LED display to your preference.

• Press the DIMMER button (usually located on the top or side) to cycle through the four available brightness levels, including a screen-off option.

Image: Side view of the Electrohome CR35 showing the dimmer control buttons.

4.6 Temperature Display

The unit displays the indoor temperature on the LED screen. No specific action is required to view this feature.

5. Maintenance

• Keep the unit dry and clean. Use a soft, dry cloth to wipe the exterior.
• Avoid using abrasive cleaners or solvents that may damage the finish.
• Ensure proper ventilation and avoid blocking the speaker grilles.
• Replace backup batteries annually or when the low battery indicator appears to ensure continuous operation during power outages.

6. Troubleshooting

• No Power/Display: Ensure the power adapter is securely plugged into both the unit and a working wall outlet. Check household circuit breakers.
• Incorrect Time: Verify the time zone setting. If using SelfSet, ensure the unit has clear reception. Manually set the time if necessary (refer to Section 3.3).
• Alarm Not Sounding: Check that the alarm is activated (alarm icon visible on display) and the volume is not set to minimum. Ensure the correct alarm schedule (Everyday, Weekdays, Weekends) is selected.
• Poor Radio Reception: Extend the FM antenna fully. Try repositioning the unit to improve signal strength.
• Motion Sensor Not Responding: Ensure there are no obstructions over the sensor area. Clean the sensor if dust or debris is present.

7. Specifications

8. Warranty & Support

The Electrohome Retro Alarm Clock Radio (CR35) comes with a 1 Year Manufacturer's Labor + Parts Warranty.

For technical support, troubleshooting assistance, or warranty claims, please contact Electrohome customer service through their official website or the retailer where the product was purchased.