Hampton Bay DC016LED 16" Brushed Nickel LED Round Flush Mount User Manual

1. Introduction

Thank you for purchasing the Hampton Bay DC016LED 16-inch Brushed Nickel LED Round Flush Mount light fixture. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting product. Please read this manual thoroughly before beginning installation and retain it for future reference.

Image 1.1: The Hampton Bay DC016LED 16-inch Brushed Nickel LED Round Flush Mount light fixture.

This LED flush mount fixture is designed for indoor use, providing efficient and long-lasting illumination. Its brushed nickel finish and round design offer a modern aesthetic suitable for various interior spaces.

2. Safety Information

WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, servicing, or cleaning.

• Always follow local electrical codes and the National Electric Code (NEC).
• If you are unsure about the installation, consult a qualified electrician.
• Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
• This fixture is designed for 120-volt AC circuits only.
• Do not look directly into the LED light source when the fixture is powered on, as this may cause eye strain or damage.
• Ensure all connections are secure and properly insulated.

3. Package Contents

Verify that all parts are present before beginning installation. If any part is missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.

• LED Flush Mount Fixture (1)
• Mounting Hardware Kit (screws, wire nuts, mounting bracket) (1 set)
• Instruction Manual (1)

4. Setup and Installation

Before installation, ensure the power is OFF at the circuit breaker. This fixture is designed for flush mount installation on a standard electrical junction box.

4.1. Tools Required (Not Included)

• Phillips Head Screwdriver
• Wire Strippers
• Electrical Tape
• Safety Glasses

4.2. Installation Steps

1. Turn Off Power: Locate the circuit breaker controlling the light fixture's location and turn it OFF. Verify power is off using a voltage tester.
2. Remove Old Fixture: Carefully remove the existing light fixture from the ceiling. Disconnect all wiring.
3. Attach Mounting Bracket: Secure the mounting bracket (included in hardware kit) to the electrical junction box using the provided screws. Ensure the bracket is firmly attached.
4. Make Electrical Connections: Connect the fixture's wires to the house wires using the provided wire nuts. Match the wires as follows:
   • Black (Live) to Black (Live)
   • White (Neutral) to White (Neutral)
   • Green or Bare Copper (Ground) to Green or Bare Copper (Ground)
   Ensure all connections are secure and cover with electrical tape if necessary.
5. Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it using the screws provided. Ensure the fixture is flush against the ceiling.
6. Restore Power: Once the fixture is securely installed, turn the power back ON at the circuit breaker.

Image 4.1: The Hampton Bay DC016LED fixture installed on a ceiling.

5. Operating Instructions

The Hampton Bay DC016LED flush mount fixture operates like a standard light fixture. Once properly installed and powered, it can be controlled by a wall switch.

• Turning On/Off: Flip the wall switch connected to the fixture to turn the light on or off.
• Dimming: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed. Follow the dimmer switch manufacturer's instructions for operation.

6. Maintenance

The Hampton Bay DC016LED fixture requires minimal maintenance due to its integrated LED design.

• Cleaning: Before cleaning, ensure the power to the fixture is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
• LEDs: The LEDs in this fixture are integrated and not replaceable. Do not attempt to open the fixture to replace LEDs.

Note: Some customer reviews mention difficulty cleaning the inside of the fixture due to its design. If internal cleaning is required, it may necessitate carefully unmounting the fixture from the ceiling.

7. Troubleshooting

If you experience issues with your fixture, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, contact a qualified electrician or customer support.

8. Specifications

Detailed technical specifications for the Hampton Bay DC016LED fixture:

Image 8.1: LED Lighting Facts label for the DC016LED fixture, showing light output, wattage, efficacy, and color temperature.

9. Warranty and Support

This product is manufactured by The Home Depot. For warranty information or customer support, please refer to the documentation included with your purchase or contact The Home Depot customer service directly.

Warranty Description: Na.

For technical assistance or to report missing/damaged parts, please have your model number (DC016LED) and purchase information ready when contacting support.