Vax S86-SF-CC Steam Fresh Combi Classic Multifunction Steam Mop User Manual

1. Product Overview

The Vax S86-SF-CC Steam Fresh Combi Classic is a versatile multifunction steam mop designed for effective cleaning of various surfaces. It combines steam power with detergent for enhanced cleaning performance, breaking down grease and grime more efficiently than steam alone. The unit features a detachable handheld steamer for targeted cleaning of smaller areas and hard-to-reach spots.

Figure 1: Vax S86-SF-CC Steam Fresh Combi Classic Multifunction Steam Mop in its upright position, showcasing its main body, handle, and floor head.

Key Features:

• Steam + Detergent Function: Utilizes a combination of steam and cleaning solution for superior grease and grime removal, leaving floors fresh.
• Integrated Handheld Steamer: Detachable unit for cleaning taps, tiles, windows, mirrors, and other surfaces.
• Rapid Heat-up: Ready for use in approximately 40 seconds.
• Angular Floor Head: Designed to reach into corners and difficult areas for comprehensive cleaning.
• Variable Steam Control: Allows adjustment of steam output for different cleaning tasks and surfaces.
• Overheat Protection: Built-in safety mechanism to prevent overheating.

2. Safety Information

Always read and understand all safety warnings and instructions before using this appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

General Safety Precautions:

• Do not leave the appliance unattended when plugged in.
• Do not use the appliance if the power cord or plug is damaged.
• Do not direct steam at people, animals, or electrical appliances.
• Use only Vax recommended cleaning solutions.
• Ensure the water tank is filled before operation.
• Keep hands and feet away from the steam nozzle during operation.
• Unplug the appliance from the power outlet before cleaning or maintenance.

3. Setup and Assembly

Follow these steps to assemble your Vax S86-SF-CC steam mop before first use.

1. Attach the Handle: Insert the handle into the main body of the steam mop until it clicks securely into place.
2. Attach the Floor Head: Connect the floor head to the base of the main body, ensuring it is firmly attached.
3. Fill the Water Tank: Open the water tank cap and fill with clean tap water. The water tank capacity is 0.26 liters. Close the cap securely.
4. Fill the Solution Tank (Optional): If using detergent, open the solution tank cap and fill with Vax recommended cleaning solution. The solution tank capacity is 200 ml. Close the cap securely.
5. Attach Microfibre Pad: Securely attach a clean microfibre cleaning pad to the bottom of the floor head.

4. Operating Instructions

4.1. Using as a Steam Mop

1. Ensure the water tank is filled. If using detergent, ensure the solution tank is also filled.
2. Plug the appliance into a suitable power outlet (240 Volts).
3. Wait approximately 40 seconds for the appliance to heat up. The indicator light will change when ready.
4. Select the desired steam level using the variable steam control.
5. Begin mopping by moving the floor head back and forth over the surface. The angular floor head is designed to reach corners effectively.
6. For stubborn stains, hold the steam mop over the area for a few seconds to allow the steam and detergent to penetrate.
7. The steaming time is approximately 15 minutes per full water tank. Refill as needed.

4.2. Using as a Handheld Steamer

The Vax S86-SF-CC features a detachable handheld steamer for versatile cleaning.

1. Unplug the steam mop from the power outlet.
2. Press the release button to detach the handheld unit from the main body.
3. Attach the desired accessory (e.g., grout brush, concentration nozzle) to the handheld unit.
4. Plug the handheld unit back into the power outlet.
5. Wait for the unit to heat up.
6. Direct the steam nozzle towards the surface to be cleaned. Use short bursts of steam for effective cleaning.

Figure 2: The handheld steamer with a brush attachment effectively cleaning grout lines between floor tiles.

Figure 3: The handheld steamer being used to clean around the edges of a kitchen sink, demonstrating its versatility for various surfaces.

Figure 4: The handheld steamer with a brush attachment cleaning a stovetop, effectively removing grime and spills.

Figure 5: The handheld steamer cleaning a high chair tray, illustrating its use for sanitizing children's items.

5. Maintenance and Care

Regular maintenance ensures optimal performance and extends the lifespan of your Vax steam mop.

5.1. After Each Use:

• Unplug the appliance and allow it to cool completely.
• Empty any remaining water from the water tank and solution from the solution tank.
• Remove and wash the microfibre cleaning pad. It can be machine washed according to fabric care instructions.
• Wipe down the exterior of the appliance with a damp cloth.

5.2. Descaling:

To prevent limescale buildup, especially in hard water areas, descale your steam mop regularly (e.g., every 3-6 months depending on usage and water hardness).

1. Prepare a descaling solution as per manufacturer's instructions or use a mixture of white vinegar and water.
2. Pour the descaling solution into the water tank.
3. Allow the solution to sit for the recommended time (refer to descaling product instructions).
4. Run the appliance until the tank is empty, ensuring steam is expelled.
5. Rinse the tank thoroughly with clean water and run clean water through the system to flush out any residue.

5.3. Storage:

Store the steam mop in a cool, dry place, away from direct sunlight and out of reach of children.

6. Troubleshooting

If you encounter issues with your Vax S86-SF-CC, refer to the following common problems and solutions.

7. Specifications

• Model: S86-SF-CC
• Brand: Vax
• Type: Multifunction Steam Mop (Combi Classic)
• Power: 1600 Watts
• Voltage: 240 Volts
• Water Tank Capacity: 0.26 Litres
• Solution Tank Capacity: 200 ml
• Heat-up Time: Approximately 40 seconds
• Steaming Time: Up to 15 minutes (per full water tank)
• Steam Flow Rate: 15 grams per minute
• Item Weight: 3.69 kg
• Product Dimensions: 30 x 116 x 31 cm
• Recommended Surfaces: Hard Floors, Carpets (with glider)
• Special Features: Portable, Steam Control, Handheld Steamer

8. Warranty and Support

For warranty information, product registration, or technical support, please contact Vax Customer Care.

• Customer Care Number: 0330 026 8455 (as per product information)
• Online Support: Refer to the official Vax website for FAQs and support resources.
• Warranty: Please retain your proof of purchase for warranty claims. Warranty terms and conditions may vary by region.