Introduction
This manual provides instructions for the safe and efficient use of your UPBRIGHT 5V AC/DC Adapter. Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
Always observe the following safety precautions to prevent injury or damage to the product:
- Indoor Use Only: This adapter is designed for indoor use. Do not expose it to rain or moisture.
- Proper Voltage: Ensure the input voltage (100-240VAC, 50/60Hz) matches your local power supply.
- Avoid Overloading: Do not connect devices that exceed the adapter's output specifications (5V, 1A, 5W).
- Protection Features: The adapter includes Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard your devices.
- Handle with Care: Do not drop, disassemble, or attempt to repair the adapter. Refer servicing to qualified personnel.
- Keep Away from Children: Store the adapter out of reach of children.
Product Overview
The UPBRIGHT 5V AC/DC Adapter is a power supply unit designed to provide stable 5V DC power to compatible devices, such as Codos pet hair trimmers. It features a 2-prong connector and is suitable for various Codos models.

Image 1: Front view of the UPBRIGHT 5V AC/DC Adapter, showing the main unit with a 2-prong plug and the attached DC output cable.

Image 2: Top-down view of the UPBRIGHT 5V AC/DC Adapter, with the power cord neatly coiled, highlighting its compact design.

Image 3: Side view of the UPBRIGHT 5V AC/DC Adapter, displaying the product label with model number, input/output specifications, and certification marks (CE, FCC).

Image 4: Illustration showing various international outlet adapters (AU, EU, UK types) that may be included for international orders, alongside a sample warranty certificate.
Setup
- Verify Compatibility: Before connecting, ensure your device requires a 5V DC input and has a compatible 2-pin connector. This adapter is compatible with Codos CP-6800, CP-9600, ON2, CP-8000, CP-9100, CP-9200, CP-7800, and CP-7900 pet hair trimmers.
- Connect to Device: Insert the DC output connector of the adapter firmly into the charging port of your Codos pet hair trimmer or other compatible device.
- Plug into Outlet: Plug the 2-prong AC input plug of the adapter into a standard 100-240VAC 50/60Hz wall outlet.
- Charging Indication: Your device should indicate that it is charging (e.g., an LED indicator on the trimmer).
Operating Instructions
This adapter functions as a power supply and charger. Once connected, it will provide power to your device or charge its internal battery.
- Continuous Power: For devices that operate directly from AC power, the adapter will supply continuous 5V DC power.
- Battery Charging: For devices with rechargeable batteries, the adapter will charge the battery. Refer to your device's manual for specific charging times and indicators.
- Disconnect When Not in Use: To conserve energy and prolong the life of the adapter, unplug it from the wall outlet when not in use or when the device is fully charged.
Maintenance
- Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Inspect Regularly: Periodically check the adapter and cable for any signs of damage, suchs as frayed wires or cracked casing. If damage is found, discontinue use immediately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on/charging |
|
|
| Adapter feels warm during use | Normal operation, especially under load. | This is generally normal. If it becomes excessively hot or emits smoke/smell, unplug immediately and discontinue use. |
| Sparking when plugging into outlet | Minor sparking is normal due to electrical contact. | If sparking is excessive or continuous, unplug immediately and have the outlet inspected by a qualified electrician. |
Specifications
| Feature | Detail |
|---|---|
| Model | TDS TDTA05C-050100 (Compatible with Codos CP-6800, CP-9600, ON2, CP-8000, CP-9100, CP-9200, CP-7800, CP-7900) |
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 5V DC |
| Output Current | 1A (1000mA) |
| Power Output | 5W (7W max) |
| Connector Type | 2-Pin / 2-Prong (AC input), Specific DC output connector for compatible devices |
| Protection Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Weight | Approximately 3 ounces |
Warranty and Support
This UPBRIGHT product comes with a limited warranty. Please refer to the warranty certificate included with your purchase for specific terms and conditions. Typically, UPBRIGHT offers:
- Refund Policy: 30 days refund.
- Exchange Policy: 24 months exchange.
For technical support or warranty claims, please contact UPBRIGHT customer service through their official channels. Keep your purchase receipt as proof of purchase.
Note: Warranty details are based on typical UPBRIGHT policies and may vary. Always refer to the documentation provided with your specific product.