Elero Aero Outdoor Wind and Sun Protection Unit

1. Product Overview

The Elero Aero is an advanced outdoor wind and sun protection unit designed for use with roller shutters and awnings. This ProLine series sensor accurately measures light intensity and wind speed, transmitting this data to an AeroTec control unit. The AeroTec then issues commands to your solar protection system, ensuring optimal operation based on environmental conditions.

It is engineered for intelligent control of sun and wind protection, offering various mounting options. Please note that the Elero Aero unit functions exclusively in conjunction with an AeroTec control unit, which is not included with this sensor.

Figure 1: The Elero Aero unit, a white, elongated device featuring a light sensor at the front and wind cups for measuring wind speed at the bottom. The unit is designed for outdoor installation and integrates with an AeroTec control system.

2. Safety Instructions

• Read all instructions carefully before installation and operation.
• Installation must be performed by a qualified electrician or technician in accordance with local electrical codes and regulations.
• Ensure the power supply to the AeroTec control unit is disconnected before performing any installation or maintenance.
• Do not attempt to modify or repair the unit yourself. Refer all servicing to qualified personnel.
• Keep the unit away from extreme temperatures, direct water immersion, and corrosive substances.
• This unit is designed for outdoor use but should be mounted in a location that minimizes direct impact from severe weather conditions where possible.

3. Package Contents

Verify that all components are present before beginning installation:

• Elero Aero Wind and Sun Protection Unit (Model: 28160.0001)
• Mounting hardware (screws, anchors, etc. - specific items may vary based on packaging)
• Instruction Manual (this document)

Note: The AeroTec control unit is sold separately and is required for the operation of this sensor.

4. Setup and Installation

Proper installation is crucial for the accurate functioning of the Elero Aero unit. This unit is designed to be mounted outdoors.

4.1 Mounting Location

• Choose a location that provides unobstructed exposure to wind and sunlight. Avoid areas shadowed by buildings, trees, or other obstructions.
• Mount the unit securely to a stable surface, such as a wall or mast, ensuring it is level.
• Consider accessibility for future maintenance or cleaning.

4.2 Electrical Connection

The Elero Aero unit connects directly to a compatible Elero AeroTec control unit. Refer to the AeroTec's instruction manual for specific wiring diagrams and connection procedures.

1. Ensure the power to the AeroTec control unit is OFF.
2. Route the cable from the Elero Aero unit to the AeroTec control unit, protecting it from damage and moisture.
3. Connect the wires according to the color coding and terminal labels provided in the AeroTec manual.
4. Secure all connections and ensure proper insulation.
5. Once connections are complete, restore power to the AeroTec unit.

5. Operating Instructions

The Elero Aero unit operates automatically by continuously monitoring wind speed and light intensity. It sends these measurements to the connected AeroTec control unit.

5.1 Automatic Operation

• The unit will begin sensing environmental conditions immediately upon receiving power from the AeroTec.
• The AeroTec control unit uses the data from the Aero sensor to automatically adjust your roller shutters or awnings based on pre-set thresholds for wind and sun.
• For example, if wind speed exceeds a set limit, the AeroTec may retract awnings to prevent damage. If sunlight intensity is high, it may extend awnings for shade.

5.2 Adjusting Thresholds

Thresholds for wind speed and light intensity are configured within the AeroTec control unit. Refer to the AeroTec instruction manual for detailed steps on how to adjust these settings to suit your preferences and local conditions.

6. Maintenance

Regular maintenance ensures the longevity and accurate performance of your Elero Aero unit.

• Cleaning: Periodically clean the exterior of the unit, especially the light sensor and wind cups, with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no debris obstructs the wind cups or light sensor.
• Inspection: Annually inspect the mounting hardware and cable for any signs of wear, corrosion, or damage. Tighten any loose screws.
• Obstructions: Ensure that no new obstructions (e.g., growing tree branches, new structures) are blocking the wind or sun exposure to the sensor.

Note: No user-serviceable parts are inside the unit. Do not open the casing.

7. Troubleshooting

If you experience issues with your Elero Aero unit, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, please contact Elero customer support or a certified technician.

8. Specifications

9. Warranty and Support

For information regarding warranty coverage, technical support, or spare parts availability, please contact Elero customer service directly or visit their official website. Please have your model number (28160.0001) and ASIN (B00KLBDB2M) ready when contacting support.

Note: Information regarding spare parts availability is not provided in the product data.