Givi EH1110 Handguard Extensions Instruction Manual

1. Introduction

Thank you for choosing the Givi EH1110 Handguard Extensions. These extensions are designed to enhance the protection offered by your motorcycle's original handguards, specifically for the Honda Crosstourer 1200 and DCT models. They provide improved wind deflection and reduce rider fatigue during rides.

Key Features:

• Manufactured from durable smoked plexiglass.
• Designed to fit seamlessly with the original handguards of compatible motorcycles.
• Effectively reduces wind buffeting around the hands and forearms.
• Contributes to reduced rider fatigue on longer journeys.
• Includes all necessary installation instructions and hardware.

2. Setup and Installation

The Givi EH1110 Handguard Extensions are designed for straightforward installation. Please follow these steps carefully to ensure proper fitment and safety.

Required Tools:

• Appropriate Allen keys or wrenches (refer to your motorcycle's manual for specific sizes if needed for original handguard removal).
• Soft cloth to protect surfaces.

Installation Steps:

1. Prepare the Motorcycle: Ensure the motorcycle is stable on its stand. Turn off the engine and remove the ignition key.
2. Identify Mounting Points: The EH1110 extensions are designed to attach directly to your motorcycle's existing original handguards. Locate the attachment points on the original handguards.
3. Position the Extension: Carefully align the Givi EH1110 extension with the original handguard. The extension should sit flush against the original part.
4. Secure the Extension: Using the provided hardware (screws, washers, nuts), attach the extension to the original handguard. Start by hand-tightening all fasteners to ensure correct alignment.
5. Final Tightening: Once aligned, progressively tighten all fasteners using the appropriate tools. Do not overtighten, as this may damage the plexiglass or original handguard. Ensure all connections are secure.
6. Repeat for Other Side: Follow the same procedure for the handguard on the opposite side of the motorcycle.
7. Final Check: Before riding, visually inspect both handguard extensions to ensure they are firmly attached and do not interfere with the operation of the handlebars, levers, or other controls.

Note: If you are unsure about any step, it is recommended to consult a qualified mechanic or refer to the detailed instructions included in the product packaging.

Image 1: Close-up of the Givi EH1110 Handguard Extension installed.

3. Operation and Benefits

Once installed, the Givi EH1110 Handguard Extensions operate passively by extending the protective area of your motorcycle's original handguards. Their primary function is to provide enhanced protection and comfort during your rides.

Key Operational Benefits:

• Increased Wind Protection: The extended surface area deflects more wind away from your hands and forearms, particularly beneficial in colder weather or at higher speeds.
• Reduced Fatigue: By minimizing direct wind pressure on your hands, these extensions help reduce muscle fatigue, allowing for more comfortable and longer rides.
• Protection from Debris: They offer an additional barrier against small road debris, insects, and light precipitation, safeguarding your hands and controls.

Image 2: Honda Crosstourer 1200 with Givi EH1110 Handguard Extensions and other Givi accessories.

4. Maintenance

To ensure the longevity and clear visibility of your Givi EH1110 Handguard Extensions, regular maintenance is recommended.

Cleaning:

• Use a soft cloth and mild soap with water to clean the plexiglass surface.
• Avoid abrasive cleaners, solvents, or harsh chemicals, as these can scratch or damage the plexiglass.
• Rinse thoroughly with clean water and dry with a soft, lint-free cloth.

Inspection:

• Periodically check all mounting screws and fasteners to ensure they remain tight. Vibrations from riding can sometimes loosen connections.
• Inspect the plexiglass for any cracks or damage. While durable, plexiglass can be susceptible to impact damage. Replace damaged extensions to maintain optimal protection and appearance.

5. Troubleshooting

This section addresses common issues you might encounter with your Givi EH1110 Handguard Extensions.

Issue: Handguard Extension feels loose after installation.

• Solution: Re-check all mounting screws and ensure they are tightened securely. Do not overtighten, but ensure a firm connection. If the issue persists, verify that the correct hardware was used and that the extension is properly seated against the original handguard.

Issue: Increased wind noise or buffeting after installation.

• Solution: While designed to reduce buffeting, individual rider and motorcycle aerodynamics can vary. Ensure the extensions are installed symmetrically and correctly. If the issue persists, consider adjusting your riding posture or checking other wind-deflecting accessories on your motorcycle.

Issue: Plexiglass appears scratched or cloudy.

• Solution: This is often due to improper cleaning. Use only soft cloths and mild soap. For minor scratches, specialized plexiglass polishing kits may be available. For significant damage or cloudiness that affects visibility, replacement is recommended.

6. Specifications

7. Warranty Information

Givi products are manufactured to high standards. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Givi website. Typically, warranty covers manufacturing defects under normal use.

Keep your proof of purchase for any warranty claims.

8. Customer Support

For technical assistance, installation queries, or parts replacement, please contact Givi customer support through their official website or your local authorized dealer.

Givi Official Website: www.givi.it (Please check for your regional website for specific contact details).

When contacting support, please have your product model number (EH1110) and proof of purchase readily available.