Introduction
The Koss KPH7B Portable On-Ear Headphones are designed for listeners seeking a lightweight audio solution with clear sound reproduction. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your headphones.

Image: Koss KPH7B On-Ear Headphones in blue, showcasing the lightweight design and earcups.
What's in the Box
- 1 x Koss KPH7B On-Ear Headphones
Setup
- Adjusting the Headband: Gently extend or retract the headband on both sides to achieve a comfortable and secure fit over your ears. The headband is designed to be flexible for various head sizes.
- Connecting to a Device: Locate the 3.5mm audio jack on your audio source (e.g., MP3 player, smartphone, computer). Insert the 3.5mm plug of the headphones firmly into the audio jack.

Image: A person demonstrating the adjustment of the headband on the Koss KPH7B headphones.
Operating Instructions
- Power On/Off: These headphones are passive and do not require power. They operate once connected to an audio source.
- Volume Control: Adjust the volume directly on your connected audio device. The headphones do not feature integrated volume controls.
- Wearing the Headphones: Place the earcups over your ears, ensuring the soft cushions are comfortable. Adjust the headband for a snug fit that does not cause discomfort during extended use.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the exterior of the headphones. For the earcup cushions, gently wipe with a slightly damp cloth and allow to air dry completely before use. Do not use harsh chemicals or abrasive cleaners.
- Storage: When not in use, store the headphones in a clean, dry place away from extreme temperatures and direct sunlight. Avoid tangling the cord to prevent damage.
- Cable Care: Do not pull on the cable to disconnect the headphones from your device. Always grasp the 3.5mm plug directly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low volume |
|
|
| Sound distortion |
|
|
| Uncomfortable fit |
|
|
Specifications
- Model: KPH7
- Brand: Koss
- Connectivity Technology: Wired
- Headphones Jack: 3.5 mm Jack
- Cable Length: 4 ft (approximately 1.2 meters)
- Frequency Response: 80-18,000 Hz
- Sensitivity: 91 dB SPL
- Impedance: 32 Ohms
- Item Weight: 1.6 ounces (approximately 45 grams)
- Product Dimensions: 8.6 x 2.1 x 6.1 inches (approximately 21.8 x 5.3 x 15.5 cm)
- Ear Placement: On Ear
- Material: Faux Leather (ear cushions)
- Color: Blue
Official Product Videos
Koss KPH7 On-Ear Lightweight Headphones Overview
Video: This video provides an overview of the Koss KPH7 On-Ear Lightweight Headphones, highlighting key features such as frequency response, sensitivity, and design elements like the adjustable headband and 4 ft cord. It also covers device compatibility with MP3 players and iPods via a 3.5mm plug.
Product Overview Video
Video: A brief product overview video showcasing the Koss KPH7B headphones, demonstrating their physical attributes and design.
Warranty and Support
For warranty information and customer support, please refer to the official Koss website or contact their customer service directly. Specific warranty terms may vary by region and retailer.
You can visit the Koss Store on Amazon for more information.





