Honeywell Belmar 52-Inch Outdoor Ceiling Fan Instruction Manual

1. Introduction and Overview

The Honeywell Belmar 52-inch outdoor ceiling fan is designed to provide efficient air circulation in various outdoor and indoor settings. This wet-rated fan features a traditional 5-blade design and is controlled via a pull chain. Its robust construction ensures durability and reliable performance in diverse environments.

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Honeywell Belmar ceiling fan. Please read all instructions carefully before beginning installation or use.

2. Safety Information

To reduce the risk of electrical shock, fire, or personal injury, always follow these basic safety precautions:

• Read all instructions before installing the fan.
• Ensure the power is disconnected at the circuit breaker before installation or servicing.
• All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, consult a qualified electrician.
• The fan must be mounted to a structurally sound ceiling joist or outlet box capable of supporting the fan's weight (approximately 14.52 lbs).
• Keep hands, clothing, and other objects clear of the fan blades when the fan is in operation.
• Do not operate the fan with damaged blades or housing.
• This fan is ETL wet-rated, suitable for outdoor use in areas exposed to direct water.

3. Package Contents

Verify that all components are present before beginning installation:

• Fan Motor Assembly
• 5 Fan Blades
• Blade Brackets
• Canopy
• Mounting Bracket
• 4-inch Downrod
• Hardware Pack (screws, washers, wire nuts, etc.)
• Pull Chains
• Instruction Manual

4. Specifications

5. Setup and Installation

The Honeywell Belmar fan offers versatile installation options to suit various ceiling types. Installation typically takes 45-60 minutes.

Mounting Options:

• Standard Mount: Utilizes the included 4-inch downrod for standard flat ceilings.
• Angle Mount: Allows for installation on vaulted or angled ceilings. A longer downrod may be required (sold separately) for proper blade clearance.
• Closemount: For low ceilings, the fan can be installed without a downrod, mounting directly to the ceiling.

Installation Steps (General):

1. Turn off power at the circuit breaker.
2. Install the mounting bracket to the ceiling outlet box.
3. Assemble the fan motor and downrod (if applicable).
4. Hang the fan assembly from the mounting bracket.
5. Complete electrical wiring connections.
6. Attach the canopy and secure it.
7. Install the fan blades to the blade brackets, then attach to the motor.
8. Attach the pull chains.
9. Restore power and test the fan.

For detailed, step-by-step instructions, refer to the included owner's manual.

6. Operating Instructions

The Honeywell Belmar ceiling fan is operated using two pull chains:

• Fan Speed Control: One pull chain controls the fan's three speeds (High, Medium, Low) and turns the fan off. Pull the chain repeatedly to cycle through the speeds.
• Directional Control (Reversible Motor): A switch on the fan motor housing allows you to reverse the direction of the blades.

Seasonal Operation:

• Summer Mode (Counter-clockwise): For a cooling effect, set the fan to rotate counter-clockwise. This pushes air downward, creating a breeze.
• Winter Mode (Clockwise): To circulate warm air, set the fan to rotate clockwise. This draws cool air up and pushes warm air down from the ceiling, helping to distribute heat.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your ceiling fan.

• Cleaning: Wipe the fan blades and motor housing with a damp cloth. Avoid using abrasive cleaners that could damage the finish.
• Blade Inspection: Periodically check the fan blades for any signs of damage or warping. Replace damaged blades immediately.
• Tighten Fasteners: Over time, some fasteners may become loose. Check and tighten all screws and connections at least twice a year.
• Motor Lubrication: The fan motor is permanently lubricated and does not require additional oiling.

8. Troubleshooting

If you experience issues with your fan, consult the following common troubleshooting steps:

• Fan Does Not Start:
  • Check that the circuit breaker is on.
  • Ensure all electrical connections are secure.
  • Verify the pull chain is fully engaged for a speed setting.
• Fan Wobbles:
  • Ensure all blade screws are tightened.
  • Check that the mounting bracket is securely fastened to the ceiling.
  • Verify the downrod is properly seated and secured.
  • Balance the blades using a balancing kit (not included) if necessary.
• Noisy Operation:
  • Ensure all screws in the motor housing are tight.
  • Check for loose blade screws.
  • Confirm the fan is properly mounted and not touching any part of the ceiling.

9. Product Videos

Watch these official product videos for additional information and visual guidance:

10. Warranty and Support

This Honeywell Belmar 52-inch Outdoor Ceiling Fan comes with a Limited Lifetime Manufacturer Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your product or contact Honeywell customer support.

For technical assistance, troubleshooting not covered in this manual, or to inquire about replacement parts, please contact Honeywell Ceiling Fans customer support directly. Contact information can typically be found on the Honeywell website or in your product packaging.