Introduction
Thank you for choosing the PROFLO PF1097 Integrated Diverter Tub Spout. This manual provides essential information for the proper installation, operation, and maintenance of your new tub spout. Please read these instructions carefully before beginning installation and retain them for future reference.
The PROFLO PF1097 tub spout is constructed from durable brass and features a classic pull-up style diverter for seamless transition between tub filling and shower operation. Its unrestricted flow rate ensures efficient tub filling.
This image displays the PROFLO PF1097 tub spout, featuring a sleek chrome finish and an integrated pull-up diverter on top. The spout has a curved design, typical for bathtub applications.
Safety Information
- Always turn off the main water supply before attempting any installation or repair.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- If you are unsure about any part of the installation process, it is recommended to consult a qualified plumber.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
- PROFLO PF1097 Integrated Diverter Tub Spout (Chrome)
Setup and Installation
This tub spout is designed for wall-mount, single-hole installation. Ensure you have the necessary tools before starting.
Tools You May Need:
- Adjustable wrench
- Pipe thread sealant or Teflon tape
- Soft cloth
Installation Steps:
- Prepare the Area: Turn off the main water supply to the bathroom. Clear the area around the existing tub spout.
- Remove Old Spout (if applicable): Depending on the type of existing spout, it may unscrew counter-clockwise or have a set screw underneath that needs to be loosened with an Allen wrench.
- Clean Pipe Threads: Ensure the pipe extending from the wall is clean and free of debris.
- Apply Sealant: Apply pipe thread sealant or wrap Teflon tape clockwise around the threads of the pipe extending from the wall.
- Install New Spout: Carefully thread the PROFLO PF1097 tub spout onto the pipe by turning it clockwise. Hand-tighten first, then use an adjustable wrench to tighten it securely. Avoid over-tightening, which can damage the threads or the spout.
- Check Alignment: Ensure the spout is properly aligned and facing downwards.
- Restore Water Supply: Slowly turn the main water supply back on and check for any leaks around the newly installed spout.
Operating Instructions
The PROFLO PF1097 tub spout features an integrated pull-up diverter for easy control of water flow.
- To Fill the Tub: Ensure the diverter knob on top of the spout is in the down position. Water will flow directly from the spout into the tub.
- To Activate Shower: While water is flowing from the tub spout, pull the diverter knob upwards. This will redirect the water flow to the showerhead.
- To Return to Tub Flow: Push the diverter knob back down. Water will resume flowing from the tub spout.
Maintenance
Proper care will help maintain the finish and functionality of your PROFLO tub spout.
- Cleaning: Clean the chrome finish regularly with a soft, damp cloth and mild soap. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or cleaners containing bleach, acids, or alcohol. These can damage the chrome finish.
- Diverter Care: If the diverter mechanism becomes stiff over time, a small amount of silicone-based lubricant can be applied to the moving parts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from base of spout | Improperly tightened spout or insufficient thread sealant. | Turn off water supply. Remove spout, reapply thread sealant or Teflon tape, and re-tighten securely. |
| Diverter does not fully engage/disengage | Mineral buildup or worn internal components. | Clean the diverter mechanism. If problem persists, replacement may be necessary. |
| Low water flow from spout | Partial obstruction in the pipe or spout. | Check water supply pressure. Inspect the pipe and spout for any blockages. |
Specifications
| Feature | Detail |
|---|---|
| Brand | PROFLO |
| Model Number | PF1097 |
| Material | Brass |
| Finish Type | Chrome |
| Mounting Type | Wall Mount |
| Installation Type | Single Hole |
| Spout Height | 3-3/8 inches (from bottom to top) |
| Tub Spout Reach | 4-15/16 inches (from wall to center of spout outlet) |
| Product Dimensions | 4.92 x 2.3 x 3.38 inches |
| Item Weight | 1.18 Pounds |
| UPC | 781889006115 |
Warranty Information
For detailed warranty information regarding your PROFLO PF1097 Integrated Diverter Tub Spout, please refer to the warranty documentation provided at the time of purchase or visit the official PROFLO website. Warranty terms and conditions may vary.
Customer Support
If you have any questions, require assistance with installation, or need to troubleshoot an issue not covered in this manual, please contact PROFLO customer service. Contact information can typically be found on the PROFLO website or on your product packaging.
