1. Product Overview
The Vestil DLI-4 Digital Load Indicator is a precision instrument designed for accurate weight measurement up to 4000 pounds. It features a clear digital display and intuitive controls for various weighing applications. This manual provides essential information for the safe and effective operation, setup, and maintenance of your DLI-4 unit.
Figure 1: Vestil DLI-4 Digital Load Indicator. This image shows the front view of the device, highlighting its robust silver casing, the blue-framed digital screen, and the three function buttons for operation.
2. Setup and Installation
Before operating the DLI-4, ensure proper setup to guarantee accurate readings and safe usage.
2.1 Unpacking
- Carefully remove the DLI-4 unit from its packaging.
- Inspect the unit for any signs of damage during transit. If damage is observed, do not use the unit and contact customer support.
- Verify that all components listed in the packing list are present.
2.2 Power Supply
The DLI-4 operates on internal batteries. Ensure batteries are correctly installed according to the polarity markings in the battery compartment. If the display does not illuminate, check battery orientation or replace with fresh batteries.
2.3 Mounting and Connection
The DLI-4 is designed to be integrated into a lifting or pulling system. Use appropriate shackles, hooks, or other rigging hardware (not included) to connect the load indicator securely. Ensure that the hardware used is rated for the maximum load capacity of the DLI-4 (4000 LB) or higher, and that connections are free from obstruction and allow for proper load distribution.
- Connect the top eyelet of the DLI-4 to the lifting mechanism (e.g., crane hook, hoist).
- Connect the bottom eyelet of the DLI-4 to the load to be weighed.
- Ensure all connections are secure and properly seated before applying any load.
3. Operating Instructions
Familiarize yourself with the control buttons and display functions for accurate operation.
3.1 Power On/Off
- To power on: Press and hold the Power/Zero button (leftmost button with a circle and arrow) until the display illuminates.
- To power off: Press and hold the Power/Zero button until the display turns off. The unit may also have an auto-off feature to conserve battery life.
3.2 Zeroing/Tare Function
The zero/tare function allows you to reset the display to zero, effectively ignoring the weight of any attached rigging or container.
- With no load or with the tare weight attached, press the Power/Zero button briefly. The display will show "0.00" or similar, indicating it has been zeroed.
3.3 Unit Conversion
The DLI-4 can display measurements in different units (e.g., pounds, kilograms).
- Press the Unit button (middle button with a 'T' and arrow) to cycle through available measurement units. The current unit will be displayed on the screen.
3.4 Hold/Peak Function
This function allows you to capture and hold the maximum weight detected during a measurement, or to simply hold the current reading.
- Press the Hold/Peak button (rightmost button with an 'F' and arrow) to activate or deactivate the hold/peak function. Refer to the on-screen indicators for active mode.
3.5 Taking a Measurement
- Ensure the unit is powered on and zeroed with no load attached.
- Carefully apply the load to the DLI-4.
- Read the weight displayed on the digital screen.
- If using the hold/peak function, note the captured value.
- Remove the load once measurement is complete.
4. Maintenance
Regular maintenance ensures the longevity and accuracy of your DLI-4 Digital Load Indicator.
4.1 Cleaning
- Clean the exterior of the unit with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or immerse the unit in water.
- Ensure the display and buttons are free from dirt and debris.
4.2 Battery Replacement
When the battery indicator appears on the display, or if the unit fails to power on, replace the batteries.
- Locate the battery compartment (usually on the rear or side of the unit).
- Open the compartment cover.
- Remove old batteries and dispose of them properly.
- Insert new batteries, ensuring correct polarity.
- Close the battery compartment cover securely.
4.3 Storage
- Store the DLI-4 in a dry, clean environment, away from extreme temperatures and direct sunlight.
- If storing for extended periods, remove the batteries to prevent leakage.
5. Troubleshooting
This section addresses common issues you might encounter with your DLI-4 unit.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Dead or incorrectly installed batteries. | Check battery polarity; replace batteries. |
| Inaccurate readings. | Unit not zeroed; overload; environmental factors (e.g., vibration). | Ensure unit is zeroed before applying load; do not exceed capacity; ensure stable environment. |
| Display shows "OL" or similar. | Overload condition. | Remove load immediately. Do not exceed the 4000 LB capacity. |
| Buttons are unresponsive. | Low battery; internal error. | Replace batteries. If issue persists, contact customer support. |
6. Specifications
Key technical specifications for the Vestil DLI-4 Digital Load Indicator.
| Specification | Value |
|---|---|
| Brand Name | Vestil |
| Model Name | DLI-4 |
| Item Weight | 2 Pounds |
| Item Dimensions L x W x H | 1.5 x 3.63 x 8.75 inches |
| Package Weight | 2.5 Pounds |
| Item Package Dimensions L x W x H | 8.75 x 3.63 x 2 inches |
| Color | Multi |
| Material | Blend |
| Suggested Users | Unisex-Adult |
| Manufacturer | Vestil Manufacturing Co. |
| Part Number | DLI-4 |
| Included Components | DIGITAL LOAD INDICATOR 4000 LB |
| Size | One Size |
| ASIN | B00KCEN9GG |
| Date First Available | June 30, 2017 |
7. Warranty Information
Vestil products are manufactured to high quality standards. For specific warranty terms and conditions applicable to your DLI-4 Digital Load Indicator, please refer to the warranty card included with your product or visit the official Vestil Manufacturing Co. website. Warranty coverage typically addresses defects in materials and workmanship under normal use.
8. Customer Support
If you have questions, require technical assistance, or need to report an issue with your Vestil DLI-4, please contact Vestil Manufacturing Co. customer support. Have your model number (DLI-4) and purchase information ready when contacting support.
For the most current contact information, please visit the official Vestil website or refer to the documentation provided with your purchase.
