Intex Family Frame Rectangular Pool User Manual

Introduction

Thank you for purchasing the Intex Family Frame Rectangular Pool. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new pool. Please read it thoroughly before assembly and use to ensure safe and enjoyable operation.

Important Safety Instructions

When installing and using this equipment, basic safety precautions should always be followed, including the following:

• Always supervise children and individuals with disabilities.
• Do not dive or jump into the pool.
• Ensure the pool is set up on a level, stable surface.
• Keep all electrical devices away from the pool.
• Empty the pool completely when not in use for extended periods or for storage.
• Follow all local regulations regarding pool safety and fencing.

Package Contents

Please check to ensure all components are present and undamaged:

• Pool Liner (Rectangular Frame Pool)
• Frame Pipes (various lengths and types)
• Corner Joints and T-Joints
• Leg Supports
• Drain Plug
• Instruction Manual
• Connection point for external filtration system (if applicable)

Setup Instructions

Follow these steps for proper assembly of your Intex Family Frame Pool:

1. Site Selection: Choose a firm, level area free of sharp objects, debris, and overhead power lines. Ensure good drainage.
2. Ground Preparation: Clear the area and lay a ground cloth (not included) for added protection.
3. Unfold Liner: Carefully unfold the pool liner in the chosen area.
4. Assemble Frame: Insert the horizontal frame pipes through the sleeves of the pool liner. Connect them using the corner and T-joints.
5. Attach Legs: Insert the vertical leg supports into the T-joints and ensure they are firmly seated.
6. Fill with Water: Begin filling the pool with water. As it fills, smooth out any wrinkles in the bottom of the liner. Stop filling when the water level reaches the indicated fill line.
7. Connect Filtration (Optional): If using an external filtration system, connect it to the designated connection points on the pool liner according to the filtration system's instructions.

Image: A family (two adults, two children) enjoying the Intex Family Frame Rectangular Pool, demonstrating its size and use in a backyard setting. The blue rectangular pool is filled with water, and the metal frame is visible.

Operating the Pool

Once assembled and filled, your Intex Family Frame Pool is ready for use. Remember to:

• Maintain proper water chemistry (pH, chlorine levels).
• Ensure constant supervision of children.
• Keep the area around the pool clear and safe.
• Use a pool cover when not in use to keep out debris and reduce evaporation.

Maintenance

Regular maintenance will extend the life of your pool and ensure clean water:

• Water Quality: Test water regularly and adjust chemicals as needed.
• Cleaning: Skim debris from the surface daily. Vacuum the pool bottom as needed.
• Filter System: If using a filter pump, clean or replace filter cartridges regularly.
• Liner Care: Inspect the liner for any signs of wear or damage. Patch small holes with a repair kit (not included).
• Winterization/Storage: For long-term storage, completely drain the pool, clean and dry all components thoroughly, and store them in a dry, protected area away from extreme temperatures.

Troubleshooting

Product Specifications

Warranty and Support

For warranty information or technical support, please refer to the manufacturer's official website or contact their customer service directly. Keep your proof of purchase for any warranty claims.

Manufacturer: Intex