1. Introduction and Overview
The Bounty Hunter Land Ranger Pro Metal Detector is engineered for both novice and experienced treasure hunters, offering advanced features for accurate metal detection across various environments. This manual provides comprehensive instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and a rewarding experience.
Key features include advanced target identification, multiple operating modes, a waterproof searchcoil for diverse terrain, and an ergonomic design for extended use.
2. Key Features
- Advanced Target ID Technology: Utilizes 99 points of TARGET-ID resolution and 4-Tone TARGET-ID for precise target identification.
- 7 Operating Modes: Offers versatile detection for various treasure hunting scenarios (Coin Hunting, Relic Hunting, Jewelry Hunting) and environments (Parks, yards, fields, beaches).
- 11-Inch Waterproof DD Searchcoil: Provides increased depth and target separation, capable of finding coin-sized objects up to 10 inches deep.
- Computerized Ground Balancing (Ground Grab): Automatically tunes the detector to ground mineralization with a single button press, reducing false signals.
- Lightweight and Ergonomic Design: Weighs just 2.5 lbs with a padded handgrip and armrest for comfortable, extended treasure hunting sessions.
- All-Purpose Metal Detection: Capable of detecting all types of metal, suitable for jewelry, coins, artifacts, and even gold nuggets in both land and shallow water.
3. Setup and Assembly
- Attach Searchcoil: Secure the 11-inch DD searchcoil to the lower stem using the provided bolt and wing nut. Ensure it is snug but allows for slight adjustment.
- Connect Stems: Insert the lower stem into the upper stem. Adjust the length to a comfortable position that allows the searchcoil to be parallel to the ground when standing.
- Mount Control Housing: Slide the control housing onto the upper stem. Ensure it is securely fastened.
- Wrap Cable: Wrap the searchcoil cable snugly around the stem, leaving enough slack near the searchcoil for adjustment. Plug the cable into the connector on the control housing.
- Install Battery: Open the battery compartment on the control housing and insert a fresh 9V alkaline battery. Close the compartment securely.
- Adjust Armrest: Position the padded armrest for comfortable support during operation.
4. Operating Instructions
4.1 Power On/Off
Press and hold the POWER button (usually located on the left side of the control panel) to turn the detector on or off. The LCD display will illuminate upon activation.
4.2 Adjusting Sensitivity
Sensitivity controls the detector's responsiveness to targets and ground mineralization. Use the + and - buttons to adjust the sensitivity level. Higher sensitivity increases detection depth but may also increase false signals in mineralized ground.
4.3 Volume Control
Adjust the audio volume using the dedicated volume controls (refer to the display for visual indication). Ensure the volume is set to a comfortable listening level.
5. Modes of Operation
The Land Ranger Pro features 7 distinct operating modes, allowing you to optimize your search for specific target types and environmental conditions. Press the MODE button to cycle through the available modes:
- All Metal Mode: Detects all types of metal without discrimination. Ideal for finding all targets or for initial site assessment.
- Discrimination Mode: Allows you to eliminate unwanted junk targets (e.g., iron, foil) based on their conductivity.
- Notch Mode: Provides more precise control over discrimination, allowing you to accept or reject specific target categories.
- Coin Mode: Optimized for detecting coins, typically discriminating against common junk metals.
- Relic Mode: Designed to find older, often less conductive, historical artifacts.
- Jewelry Mode: Configured to identify various types of jewelry metals.
- Custom Mode: Allows users to save their preferred discrimination and sensitivity settings for quick recall.
6. Target Identification
The Land Ranger Pro provides both visual and audio feedback for target identification:
- 99-Point Target ID: The LCD screen displays a two-digit Target ID number (0-99) that corresponds to the target's conductivity. Higher numbers generally indicate more conductive metals like silver, while lower numbers indicate iron or foil.
- 4-Tone Audio Feedback: The detector emits distinct audio tones (low, medium, high, very high) to help identify the type of metal detected before looking at the display.
7. Ground Balancing
Ground balancing is crucial for eliminating false signals caused by ground mineralization. The Land Ranger Pro offers:
- Automatic Ground Grab: Press the GROUND GRAB button to automatically balance the detector to the current ground conditions. This is recommended when moving to a new search area.
- Manual Ground Balance: For advanced users, manual ground balancing allows for fine-tuning the detector's response to highly mineralized or challenging ground. Refer to the detailed instruction manual for specific steps.
8. Pinpointing
Once a target is detected, the PINPOINT function helps to precisely locate its position before digging.
- Activate Pinpoint: Center the searchcoil over the target and press the PP button.
- Sweep Slowly: Move the searchcoil slowly over the target area. The detector will emit a continuous tone, increasing in pitch and volume as you get closer to the target's center.
- Locate Center: The loudest and highest-pitched tone indicates the precise center of the target.
9. Maintenance
Proper maintenance ensures the longevity and optimal performance of your metal detector.
- Cleaning: Wipe down the searchcoil and stem with a damp cloth after each use. Avoid using abrasive cleaners or solvents.
- Battery Replacement: Replace the 9V battery when the low battery indicator appears on the display. Always use fresh alkaline batteries. Remove the battery during long periods of storage.
- Storage: Store the detector in a dry, cool place away from extreme temperatures and direct sunlight.
- Cable Care: Avoid kinking or stretching the searchcoil cable. Ensure connections are clean and secure.
10. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Dead battery; Incorrect battery installation | Replace battery; Ensure correct polarity |
| Constant False Signals | High sensitivity; Mineralized ground; Electrical interference | Reduce sensitivity; Perform Ground Grab; Move away from power lines/electronics |
| Poor Detection Depth | Low sensitivity; Heavily mineralized ground; Small target size | Increase sensitivity; Re-ground balance; Sweep slower |
| Erratic Operation | Loose searchcoil cable; Water in control housing | Check cable connection; Dry out unit (if applicable) |
11. Specifications
- Brand: Bounty Hunter
- Model Number: 3410011
- Color: Black
- Searchcoil: 11-inch Waterproof DD Searchcoil
- Operating Frequency: 7.7 kHz
- Number of Programs: 7
- Display Type: LCD
- Power Source: 9V Battery (not included)
- Adjustable Length: Yes (Extended Length: 29.8 Inches)
- Item Weight: 3 Pounds
- International Protection Rating: IP54
- Manufacturer: First Texas LLC
12. Warranty and Support
The Bounty Hunter Land Ranger Pro Metal Detector comes with a 5-Year Limited Warranty from the manufacturer, First Texas LLC. For warranty claims, technical support, or service inquiries, please refer to the contact information provided in your product packaging or visit the official Bounty Hunter website.
13. Media Resources
13.1 Product Images
13.2 Official Product Videos
Video 1: An overview of the Bounty Hunter Land Ranger Pro Metal Detector, demonstrating its features and ease of use.