1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ECCO EC5605WK Electronic Camera Kit. This kit is designed to enhance visibility and safety for industrial vehicles, offering a reliable rear-view solution. The system includes a high-resolution CMOS camera and a dedicated monitor, engineered for durability and performance in demanding environments.
2. Safety Information
Read all safety instructions before installing or operating the ECCO EC5605WK Camera Kit. Failure to follow these instructions may result in injury, damage to the product, or damage to the vehicle.
- Ensure the vehicle's power is disconnected before beginning installation to prevent electrical shock or short circuits.
- All wiring should be routed carefully to avoid interference with vehicle controls, moving parts, or heat sources.
- Mount the monitor in a location that does not obstruct the driver's view or interfere with airbag deployment.
- The camera system is an aid and should not replace careful driving and proper use of mirrors.
- If you are unsure about any part of the installation process, consult a qualified professional.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- EC5605-WM Monitor (5.6-inch screen)
- EC2014-WC Camera (CMOS, 170-degree viewing angle, 18 IR illuminators)
- Power Cable for Monitor
- Video Signal Cable
- Mounting Hardware for Camera and Monitor
- Instruction Manual
4. Product Overview
The ECCO EC5605WK kit comprises two main units: the monitor and the camera.
4.1 EC5605-WM Monitor
The monitor features a 5.6-inch display for clear viewing of the camera feed. It includes controls for adjusting brightness, contrast, and other display settings to optimize visibility in various lighting conditions.
4.2 EC2014-WC Camera
The camera utilizes a CMOS sensor, providing an ultra-wide 170-degree real angle of view. It is equipped with 18 automatic infra-red night vision illuminators, ensuring clear visibility in low-light or nighttime conditions. The camera boasts an IP69 rating, indicating high resistance to dust and water ingress, making it suitable for harsh outdoor environments.
This image displays the primary components of the ECCO EC5605WK kit, including the monitor and the camera unit, ready for installation.
5. Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your camera kit. The system is designed for surface mount installation.
5.1 Camera Installation
- Select a suitable mounting location at the rear of the vehicle that provides an unobstructed view and is protected from potential damage.
- Securely attach the camera using the provided mounting hardware. Ensure the camera is oriented correctly.
- Route the camera's video and power cables through the vehicle's chassis, protecting them from sharp edges, heat, and moisture.
5.2 Monitor Installation
- Choose a mounting location inside the vehicle's cabin that allows the driver a clear view of the monitor without obstructing the road or vehicle controls.
- Attach the monitor bracket to the chosen surface using the supplied hardware.
- Secure the monitor to its bracket.
5.3 Wiring Connections
- Connect the camera's video cable to the corresponding video input on the monitor.
- Connect the camera's power cable to a suitable 12-24VDC power source on the vehicle. This can often be linked to the vehicle's reverse light circuit for automatic activation when reversing.
- Connect the monitor's power cable to a separate 12-24VDC power source, ensuring it is fused appropriately.
- Verify all connections are secure and properly insulated.
6. Operating Instructions
Once installed, operating your ECCO EC5605WK Camera Kit is straightforward.
6.1 Powering On/Off
The monitor will typically power on automatically when the vehicle's ignition is turned on, or when the camera receives power (e.g., when the vehicle is put into reverse, if wired accordingly). To manually power off or on, use the designated power button on the monitor.
6.2 Adjusting Display Settings
Use the buttons on the monitor to access the menu and adjust settings such as brightness, contrast, color, and tint. Optimize these settings for clear visibility in your operating environment.
6.3 Using the Camera View
The monitor will display the live feed from the EC2014-WC camera. Utilize this view to assist with reversing, maneuvering in tight spaces, or monitoring the area behind the vehicle. Remember that objects in the camera view may appear closer or further away than they actually are.
7. Maintenance
Regular maintenance ensures the continued performance and reliability of your ECCO EC5605WK Camera Kit.
- Cleaning the Camera Lens: Periodically clean the camera lens with a soft, damp cloth to remove dirt, dust, or debris that may obstruct the view. Avoid abrasive cleaners.
- Cleaning the Monitor Screen: Use a soft, lint-free cloth to gently wipe the monitor screen. Do not spray cleaning solutions directly onto the screen.
- Checking Connections: Regularly inspect all cables and connections for signs of wear, corrosion, or looseness. Secure any loose connections.
- Environmental Care: While the camera is IP69 rated for water and dust resistance, extreme temperatures or prolonged exposure to harsh chemicals should be avoided.
8. Troubleshooting
If you encounter issues with your camera kit, refer to the following troubleshooting guide before seeking professional assistance.
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor does not power on. | No power supply; loose power cable; blown fuse. | Check power connections; inspect vehicle fuse box; ensure ignition is on. |
| No image on monitor. | Loose video cable; camera not powered; faulty camera. | Verify video cable connection; check camera power supply; test camera if possible. |
| Poor image quality (blurry, dark). | Dirty camera lens; incorrect monitor settings; low light conditions. | Clean camera lens; adjust monitor brightness/contrast; ensure IR illuminators are active in low light. |
| Image flickers or is intermittent. | Loose cable connections; electrical interference. | Secure all cable connections; ensure cables are routed away from high-voltage wires. |
9. Specifications
Technical specifications for the ECCO EC5605WK Electronic Camera Kit:
- Model Number: EC5605WK
- Camera Type: CMOS
- Viewing Angle: 170 Degrees (Real Angle of View)
- Camera Resolution: 800 x 480 Pixels
- IP Rating (Camera): IP69
- Illumination: 18 Automatic Infra-red Night Vision Illuminators
- Power Required: 12 to 24VDC
- Monitor Screen Size: 5.6 Inches
- Installation Type: Surface Mount
- Item Weight: 3.14 pounds
- Product Dimensions: 12 x 7 x 4 inches
- UPC: 758379056110
10. Warranty and Support
The ECCO EC5605WK Electronic Camera Kit comes with a manufacturer's warranty.
- Warranty Length: 1 year from the date of purchase.
- Manufacturer: Ecco Safety Group
For warranty claims, technical assistance, or support beyond the scope of this manual, please contact Ecco Safety Group customer service. Ensure you have your product model number (EC5605WK) and proof of purchase available when contacting support.
