Introduction
The Broil King Flav-R-Wave Heat Tent is designed to enhance the flavor of your grilled food and protect the burners of your gas grill. Made from durable stainless steel, this component vaporizes food drippings, returning rich BBQ flavor to your meals while shielding the burners from corrosive grease. It is specifically designed for Broil King Signet and Sovereign series gas grills equipped with the Dual-Tube burner system.
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new Flav-R-Wave Heat Tent.
Product Features
- Enhances food flavor by vaporizing drippings.
- Protects grill burners from grease and food debris.
- Constructed from high-quality stainless steel for durability.
- Dimensions: 14.2 inches x 6.75 inches.
- Compatible with Broil King Signet and Sovereign series gas grills with Dual-Tube burners.
Image: The Broil King Flav-R-Wave Heat Tent, a stainless steel component designed to fit over grill burners.
Safety Information
Always ensure your grill is completely cool and disconnected from its fuel source before attempting any installation or maintenance. Wear appropriate protective gloves to prevent cuts or burns.
Setup and Installation
- Preparation: Ensure your grill is turned off, the gas supply is shut off, and the grill is completely cool. Open the grill lid.
- Remove Grates: Carefully lift and remove the cooking grates from your grill. Set them aside on a clean, stable surface.
- Access Burners: Locate the existing heat tents or burner covers. If present, carefully remove them. Note their orientation for future reference if they are being replaced.
- Position Flav-R-Wave: Place the new Broil King Flav-R-Wave Heat Tent directly over the grill burners. Ensure it sits securely and covers the burners adequately. The wavy side should face upwards.
- Replace Grates: Once all Flav-R-Wave heat tents are in place, carefully return the cooking grates to their original positions.
Image: An illustration showing the placement of the Flav-R-Wave heat tents inside a grill, positioned above the burners.
Operating Principles
The Flav-R-Wave system works by creating a large surface area directly above the grill burners. When food drippings fall onto the hot stainless steel, they instantly vaporize, creating smoke and steam that infuse your food with a rich, authentic barbecue flavor. This process also protects the burners from direct exposure to drippings, extending their lifespan and reducing flare-ups.
Image: A cutaway diagram illustrating how food drippings hit the hot Flav-R-Wave surface and vaporize into flavorful smoke.
Maintenance and Cleaning
Regular cleaning of your Flav-R-Wave Heat Tent is essential for optimal performance and longevity.
- Cool Down: Always allow the grill and heat tents to cool completely before cleaning.
- Removal: Carefully remove the cooking grates and then lift out the Flav-R-Wave Heat Tents.
- Scraping: Use a grill brush or scraper to remove any large food particles or carbon buildup from the surface of the heat tents.
- Washing: Wash the heat tents with warm, soapy water. For stubborn grease, a degreaser designed for grill components can be used. Rinse thoroughly.
- Drying: Dry the heat tents completely before returning them to the grill to prevent rust.
Note: The product specifications state "Is Dishwasher Safe: No". Avoid cleaning in a dishwasher.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Excessive Smoke/Flare-ups | Heavy grease buildup on Flav-R-Wave. | Clean the Flav-R-Wave heat tents thoroughly as per maintenance instructions. Reduce fat content in food. |
| Reduced Flavor Infusion | Heat tents are not hot enough or are clogged. | Ensure grill is preheated properly. Clean any debris from the heat tents. |
| Heat Tent Does Not Fit | Incorrect model purchased. | Verify your grill model (Signet or Sovereign series with Dual-Tube burners) and the Flav-R-Wave model number (18429). |
Specifications
- Model Number: 18429
- Material: Stainless Steel
- Dimensions: 13.75"L x 6.25"W x 0.25"Th (34.9 cm L x 15.9 cm W x 0.6 cm Th)
- Item Weight: 1.2 Pounds (0.54 kg)
- Compatibility: Broil King Signet and Sovereign series gas grills with Dual-Tube burner system.
- Dishwasher Safe: No
- Manufacturer: Onward Manufacturing
- UPC: 626821184295
Warranty and Support
Broil King products are manufactured to high standards. For specific warranty information regarding your Flav-R-Wave Heat Tent, please refer to the warranty documentation included with your original grill purchase or visit the official Broil King website.
For technical support or replacement parts, please contact Broil King customer service. You can find contact information on the Broil King website or through your local authorized dealer.
Online Resources:
- Visit the official Broil King Website for product information, FAQs, and support.
- Explore the Broil King Store on Amazon for other accessories and parts.
