JENSEN 6.5" MS6007BR Speaker

1. Introduction

Thank you for choosing the JENSEN 6.5" MS6007BR Speaker. This manual provides essential information for the proper installation, operation, and maintenance of your new speaker. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

The JENSEN MS6007BR is a 6.5-inch coaxial speaker designed for various applications, including outdoor and vehicle use, offering clear audio output with a 60W maximum power handling. It features a waterproof design for enhanced durability.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the product:

• Ensure all power is disconnected before installation or maintenance.
• Do not expose the speaker to extreme temperatures or direct sunlight for prolonged periods.
• Use only specified wiring and connectors. Incorrect wiring can cause damage or fire.
• Avoid placing the speaker in locations where it may be submerged in water, despite its waterproof rating, unless specifically designed for such conditions.
• Keep out of reach of children.
• If you experience any unusual operation, disconnect power immediately and consult a qualified technician.

3. Package Contents

Verify that all items are present in the package:

• JENSEN 6.5" MS6007BR Speaker (1 unit)
• Mounting Hardware (screws, clips - quantity may vary)
• Instruction Manual (this document)

4. Setup and Installation

The JENSEN MS6007BR speaker is designed for flush mounting. Follow these steps for proper installation:

1. Choose a Mounting Location: Select a flat, stable surface with sufficient depth for the speaker. Ensure there are no obstructions behind the mounting area.
2. Prepare the Mounting Hole: Using a suitable hole saw, cut a circular opening of approximately 5.5 inches (140mm) in diameter. Refer to the speaker's physical dimensions for precise measurements.
3. Wiring: Connect the speaker wires to your audio source. Ensure correct polarity (+ to + and - to -) for optimal sound performance. The speaker features standard spade terminals.
4. Mounting the Speaker: Insert the speaker into the prepared opening. Align the mounting holes on the speaker frame with the pre-drilled pilot holes (if applicable) or mark new ones. Secure the speaker using the provided mounting screws. Do not overtighten.
5. Test Functionality: Once installed, connect your audio source and test the speaker's functionality to ensure proper operation.

Figure 4.1: Front view of the JENSEN 6.5" MS6007BR Speaker. This image shows the speaker's black finish, the protective slatted grille, and the central tweeter, indicating its coaxial design. The four mounting screw holes are visible around the perimeter.

5. Operating Instructions

The JENSEN MS6007BR speaker operates passively, meaning it requires an external amplifier or head unit to produce sound. Once properly installed and connected to an audio source, sound will be reproduced through the speaker.

• Volume Control: Adjust the volume using your connected audio source (e.g., car stereo, home theater receiver).
• Audio Settings: For optimal sound quality, adjust bass, treble, and balance settings on your audio source.
• Power Handling: The speaker has a maximum power handling of 60 Watts. Avoid exceeding this limit to prevent damage.

6. Maintenance

Regular maintenance helps ensure the longevity and performance of your speaker:

• Cleaning: Wipe the speaker grille and frame with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Inspection: Periodically check the mounting screws for tightness and inspect the wiring for any signs of wear or damage.
• Environmental Protection: While waterproof, prolonged exposure to harsh elements (e.g., saltwater spray, extreme UV) can degrade materials over time. Consider protective covers if the speaker is in a highly exposed outdoor environment.

7. Troubleshooting

If you encounter issues with your speaker, refer to the following common problems and solutions:

If the problem persists after trying these solutions, contact customer support.

8. Specifications

9. Warranty and Support

The JENSEN MS6007BR Speaker comes with a limited warranty. Please refer to the warranty card included with your purchase or visit the official ASA/JENSEN website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact JENSEN customer service through their official website or the contact information provided in your product packaging.

Online Resources: For additional information, FAQs, and product registration, visit the official JENSEN support page.