DIRECTV RC65X

DirecTV RC65X Universal Remote Control User Manual

Model: RC65X

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your DirecTV RC65X Universal Remote Control. Please read this manual thoroughly before using your remote to ensure proper functionality and to maximize your viewing experience.

DirecTV RC65X Universal Remote Control and included batteries in packaging

Image: The DirecTV RC65X Universal Remote Control, still in its clear plastic packaging, is shown alongside a separate small bag containing two AAA batteries. The remote is white with grey buttons, and a green label with "IR-XMP RC65X H/HR24 & Above" is visible on its packaging. The batteries are green.

Package Contents

DirecTV RC65X Universal Remote Control
AAA Batteries (2)
This User Manual

Setup

1. Battery Installation

Locate the battery compartment on the back of the remote control.
Slide the battery cover downwards and lift to open.
Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
Replace the battery cover by sliding it back into place until it clicks securely.

2. Programming the Remote

The RC65X remote can be programmed to control your DirecTV receiver, television, and other audio/video devices. Refer to the DirecTV support website for the most up-to-date programming codes and instructions specific to your equipment.

To Program for DirecTV Receiver: The remote is typically pre-programmed for DirecTV receivers. If not, ensure the remote is in DirecTV mode (slide switch to "DirecTV" or "SAT") and follow on-screen prompts or receiver manual instructions.
To Program for TV:
1. Turn on your TV.
2. Slide the mode switch on the remote to "TV".
3. Press and hold the MUTE and SELECT buttons simultaneously until the green light at the top of the remote flashes twice.
4. Enter the 5-digit code for your TV brand. (Refer to DirecTV's official code list).
5. Point the remote at the TV and press the POWER button. If the TV turns off, the code is correct. If not, try other codes for your brand.
To Program for Audio/Video Receiver (AV1/AV2): The process is similar to programming for TV, but slide the mode switch to "AV1" or "AV2" and use the appropriate codes for your audio device.

Operating Instructions

The RC65X remote features a comprehensive set of buttons for controlling your DirecTV system and other connected devices.

Key Functions:

Button	Function
PWR (ON/OFF)	Turns the selected device (TV, DirecTV, AV1/AV2) on or off.
TV INPUT	Cycles through video inputs on your television.
FORMAT	Changes the screen aspect ratio (e.g., 4:3, 16:9).
GUIDE	Displays the program guide.
LIST	Accesses your recorded programs list (DVR).
MENU	Opens the main DirecTV menu.
SELECT / OK	Confirms selections or enters menus.
VOL (+/-)	Adjusts volume.
CHAN PAGE (+/-)	Changes channels or pages through lists.
MUTE	Mutes or unmutes audio.
REC	Records the current program.
PREV	Returns to the previous channel.
Number Pad (0-9)	Direct channel entry.
DASH (-)	Used for entering sub-channels (e.g., 7-1).
ENTER	Confirms channel entry or other inputs.

Maintenance

Cleaning: Use a soft, dry cloth to clean the remote. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
Battery Replacement: Replace batteries when the remote's response becomes sluggish or the indicator light (if present) flashes dimly. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries or different types of batteries.
Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote. Store in a cool, dry place.

Troubleshooting

Problem	Possible Solution
Remote not responding.	Check battery orientation and ensure they are fresh. Ensure there are no obstructions between the remote and the device's IR sensor. Verify the remote's mode switch is set to the correct device (DirecTV, TV, AV1/AV2).
Remote controls DirecTV but not TV/AV device.	Reprogram the remote for the specific TV or AV device using the correct codes. Ensure the mode switch is set to "TV" or "AV1/AV2" when attempting to control those devices.
Buttons are sticky or unresponsive.	Clean the remote surface with a dry cloth. Avoid spills. If cleaning does not resolve the issue, the remote may require replacement.

Specifications

Model: RC65X
Brand: DirecTV
Connectivity Technology: Infrared (IR)
Max Number of Supported Devices: 1 (Universal programming allows control of multiple device types, but typically one of each type at a time via mode switch)
Compatible Devices: DirecTV Set Top Box, Television, Audio/Video Receiver
Power Source: 2 x AAA Batteries
Product Dimensions: 8.66 x 2.36 x 2.36 inches (approximate)
Item Weight: 0.353 ounces (approximate, without batteries)

Warranty Information

This product is typically covered by a limited warranty provided by the manufacturer or seller. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.

Customer Support

For further assistance with programming, troubleshooting, or general inquiries regarding your DirecTV RC65X Universal Remote Control, please visit the official DirecTV support website or contact their customer service. Online resources often include updated programming codes and FAQs.

Note: Product specifications and features are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.