Introduction
The Rain Bird 32ETI Easy to Install In-Ground Automatic Sprinkler System Kit provides a comprehensive solution for automating lawn watering. This all-in-one kit is designed for homeowners, offering an efficient and automatic way to maintain a beautiful, green lawn without the need for manual hose or sprinkler adjustments. The system conveniently sources water from any outdoor hose faucet and is suitable for watering areas from 1,000 to 3,000 square feet. This manual provides detailed instructions for the installation, operation, and maintenance of your new sprinkler system.
What's in the Box
Your Rain Bird 32ETI kit includes all necessary components for a complete underground sprinkler system:

An overview of all components included in the Rain Bird 32ETI Easy to Install In-Ground Automatic Sprinkler System Kit.

Detailed list of items provided in the kit, such as adjustable rotary sprinklers, automatic timer, distribution tubing, and various fittings.
- 125' of 1/2" distribution tubing
- (6) Professional grade high-efficiency 32SA pop-up rotary sprinklers
- (1) Durable, professional-grade automatic 1ZEHTMR hose-end timer
- Fittings (Threaded Male Tees, 1/2" Barbed Tee, 1/2" Barbed Coupling, 1/2" Barbed Elbow, 1/2" Barbed Insertion Tool)
- Pressure Regulator
- Faucet Adapter
- (2) Automatic Drain Valves
- (2) 1/2" Compression Couplings
- (2) Drain Valve Adapter
- (6) Stakes and Cable Ties
- (1) Roll-PTFE Tape
- (1) Rotor Adjustment Tool
- (1) 1/2" Male-Female Elbow
- (1) Adapter 1/2" male pipe thread to 1/2" tubing
- (12) Nozzles
Tools Required
To successfully install your Rain Bird sprinkler system, you will need the following tools:

Essential tools for the installation process, such as a flat blade shovel, measuring tape, and AA batteries.
- Flat Blade Shovel or Half Moon Edger
- Measuring Tape
- Garden Shears or Tubing Cutter
- Two (2) AA Batteries (for the timer, not included in kit)
Before You Install: Check Water Flow Rate
Before planning your sprinkler spacing, it is crucial to check your home's water flow rate. This will help determine the optimal sprinkler spacing and maximum coverage area for your specific irrigation layout.
- Measure Flow Rate: Time how long it takes to fill a 5-gallon pail from your outdoor hose faucet.
- Calculate GPM: Use the following formula to determine the faucet's Gallons Per Minute (GPM):
Gallons ÷ Time (seconds) × 60 = GPM
For example, if it takes 17.5 seconds to fill a 5-gallon pail:5 ÷ 17.5 × 60 = 17.14 GPM - Refer to Coverage Table: Use the provided table (or similar in your kit's guide) to determine appropriate sprinkler throw, coverage, and maximum watering area based on your GPM.
Official Rain Bird video demonstrating how to check your home's water flow rate before installation.
For easier installation, uncoil the tubing and let it warm in the sun for a few hours to increase flexibility.
Installation Steps
Follow these five simple steps for installing your Rain Bird sprinkler system:

Visual overview of the 5-step installation process for the Rain Bird sprinkler system.
Step 1: Sketch and Stake Your Layout
- Sketch Your Yard: Make a quick sketch of your yard, noting any obstacles you need to work around. Mark the intended location of each sprinkler head. Refer to the installation guide included in the box for blank graph paper and sample drawings.
- Measure and Mark: Measure the distance between each sprinkler head and mark their locations with plastic stakes.

Anatomy of the system showing tubing layout and sprinkler placement relative to the timer.
Important: For proper water flow to every sprinkler, do not install more than 3 sprinkler heads per single length of distribution tubing. Each sprinkler should be located so that its watering throw distance reaches the next sprinkler to obtain the most even coverage of your watering area. Head-to-head coverage is recommended for the best results, ensuring all areas receive an even amount of water.
Step 2: Run Tubing and Connect Sprinklers
- Install Batteries and Connect Timer to Faucet: Install two AA batteries into the timer. Connect the timer to your outdoor hose faucet.
- Assemble Faucet Connection Components: Attach the tubing adapter to the pressure regulator. Connect the faucet connection components to the timer. Insert the tubing over the barbed end of the adapter and tightly adapt securely.
- Run Tubing to Stakes: Attach a 1/2-inch barbed tee to the tubing. Connect two sections of distribution tubing to the tee. Run the tubing to each of the plastic stakes, following your diagram.
- Attach Sprinklers: Cut the tubing at each sprinkler head location and insert a threaded tee. Apply nylon tape to the 1/2-inch threaded fitting on top of each tee and connect the sprinklers.
- Assemble the Drain Assembly: Assemble the drain assembly and attach it to the end of the line.

The automatic timer properly connected to an outdoor water faucet.

Connecting a sprinkler head to the main distribution tubing using the provided fittings.
Step 3: Test Watering Coverage
- Connect Sprinklers to Stakes: Temporarily cable tie the sprinkler heads to the plastic stakes.
- Test the System: Press the "Water Now" button on the timer. Observe the sprinkler throw distance and pattern.
- Adjust Sprinkler Direction: Turn the center cap to the left to match the fixed left edge of your watering area.
- Adjust Sprinkler Pattern: Use the rotor adjustment tool to adjust the pattern from 40 to 360 degrees.
- Adjust Spray Distance: Use the rotor adjustment tool to adjust the spray distance. To increase throw distance, you may also change the nozzles.

Adjusting the spray pattern of a pop-up sprinkler head to ensure optimal coverage.
Caution: Do not adjust when the rotor is under water pressure. To change nozzles, first lift the rotor shaft using the rotor adjustment tool. While holding the shaft, turn the distance screw to the left to release the nozzle. Remove the nozzle by prying with a screwdriver or needle-nose pliers. Insert the new nozzle and tighten the distance screw.
Step 4: Bury the Tubing
- Cut Slots in Lawn and Bury Tubing: Use a flat blade shovel or a half moon edger to create a small trench alongside the tubing. The tubing and sprinklers must be deep enough so that the sprinklers are flush with the ground once installed.
- Turn Water On and Check Sprinkler Function: Push the tubing into the ground and pack the dirt around the sprinklers for a neat appearance. Turn on the system and verify that all sprinklers are in full popped-up position and that the streams are even, not spitting or misting. Make any final adjustments as needed.

A person using a specialized shovel to create a narrow trench for burying the sprinkler tubing.
Step 5: Set the Automatic Timer
Program your automatic timer for hassle-free watering:
- Set Clock and AM/PM: Turn the dial to "Set Clock". Press the up and down arrows and press OK to adjust the time.
- Set Day of the Week: Press the up and down arrows and press OK to adjust the day of the week.
- Set Start Time: Turn the dial to "Set Start Time". Press the up and down arrows and press OK to set the start time. Decide whether you want to add a second start time.
- Set Duration: Turn the dial to "Set Duration". Press the up and down arrows and press OK to set the watering duration in minutes.
- Set Run Days: Turn the dial to "Set Run Days". Press the up and down arrows and press OK to select the specific watering days.
- Activate Auto Mode: Turn the dial to "Auto" when all settings are complete. When watering, the timer displays the time remaining on the current cycle.
Manual Override: To water manually, turn the dial to "Auto" and press the "Water Now" button. To stop watering at any time, press the "Cancel Watering" button. You can also press the "Cancel Watering" button repeatedly to set a specific delay up to 96 hours and then press OK.
Specifications
- Brand: Rain Bird
- Model Number: 32ETI
- Color: Black
- Material: Plastic
- Style: Automatic Sprinkler System Kit w/ Timer
- Item Dimensions (L x W x H): 6.5 x 19.75 x 20 inches
- Item Weight: 1.71 ounces
- Maximum Pressure: 70 Pound per Square Inch
- Maximum Flow Rate: 12 Gallons Per Minute
- Batteries: 2 AA batteries required (not included)
- Timer Working Temperatures: Keep from freezing to 110° F maximum
Safety Information
Ensure safe installation by handling tools with care. Connect the system to a water source properly, checking for leaks and water damage. Be cautious when dealing with the plastic components to avoid damage. Always follow local regulations and manufacturer guidelines for safe and efficient use.
Warranty and Support
For warranty information, troubleshooting assistance, or to purchase replacement parts, please refer to the official Rain Bird website or contact their customer support. Keep your purchase receipt for warranty claims.