Introduction
Thank you for choosing the Lexon Scout Watch LM128-A. This manual provides essential information for the proper use, care, and maintenance of your new timepiece. Please read these instructions carefully before using your watch to ensure optimal performance and longevity.
The Lexon Scout Watch LM128-A features a durable aluminum case, a comfortable and waterproof nylon strap, and a reliable Miyota Quartz Analog movement. It is designed for everyday wear and boasts a water resistance rating of 5 ATM.
Product Overview
The Lexon Scout Watch LM128-A combines minimalist design with robust functionality. Its clear dial and precise movement make it a practical accessory.
Image: The Lexon Scout Watch LM128-A, showcasing its silver aluminum case and grey nylon strap. The watch features a clear dial with hour markers and hands.
Key features include:
- Case Material: Aluminum
- Strap Material: Waterproof Nylon
- Movement: Miyota Quartz Analog
- Water Resistance: 5 ATM (50 meters)
- Display Type: Analog
Setup
1. Unboxing
Carefully remove the watch from its packaging. Inspect the watch for any visible damage. Ensure all protective films are removed from the crystal and case back before use.
2. Setting the Time
Image: A detailed view of the Lexon Scout Watch dial, highlighting the crown used for time adjustment.
- Pull out the Crown: Gently pull the crown (the small knob on the side of the watch case) outwards to the first position.
- Set the Time: Rotate the crown clockwise or counter-clockwise to move the hour and minute hands to the desired time.
- Push in the Crown: Once the time is set, push the crown back into its original position against the watch case. This will start the watch movement.
Ensure the crown is fully pushed in to maintain the watch's water resistance.
Operating Your Lexon Scout Watch
Wearing the Watch
The Lexon Scout Watch features a durable nylon strap designed for comfort and security. To wear the watch:
- Thread the strap through the buckle and adjust it to fit snugly but comfortably around your wrist.
- Secure the strap using the buckle closure.
Image: The Lexon Scout Watch worn on a wrist, demonstrating the fit of the nylon strap.
Water Resistance (5 ATM / 50 Meters)
Your Lexon Scout Watch is water resistant up to 5 ATM, which means it can withstand splashes, rain, and brief immersion in water, such as showering or swimming in shallow water. It is not suitable for diving, snorkeling, or high-impact water sports.
- Do not operate the crown while the watch is wet or submerged.
- Avoid exposing the watch to hot water or steam, as this can compromise the seals.
- After exposure to saltwater, rinse the watch with fresh water and dry it thoroughly.
Maintenance
Cleaning Your Watch
- Case: Wipe the aluminum case with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and thorough drying.
- Strap: The nylon strap can be cleaned with mild soap and water. Allow it to air dry completely before wearing.
- Avoid using harsh chemicals, solvents, or abrasive cleaning materials, as these can damage the watch's finish or components.
Battery Replacement
The Lexon Scout Watch is powered by a long-lasting quartz battery. When the watch stops running, it indicates that the battery needs to be replaced. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seals are properly maintained.
Attempting to replace the battery yourself may void the warranty and compromise the watch's water resistance.
Troubleshooting
If you encounter any issues with your Lexon Scout Watch, please refer to the following common problems and solutions:
- Watch Not Running:
- Check if the crown is fully pushed in.
- The battery may need replacement. Refer to the "Battery Replacement" section.
- Time is Inaccurate:
- Ensure the time was set correctly and the crown is fully pushed in.
- A low battery can affect timekeeping accuracy. Consider battery replacement.
- Exposure to strong magnetic fields can affect quartz movements. Keep the watch away from strong magnets.
- Condensation Under Crystal:
- This may indicate a breach in the water resistance. Avoid further water exposure and have the watch inspected by a professional.
If the problem persists, please contact Lexon customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | LM128-A |
| Case Material | Aluminum |
| Case Diameter | 1.61 Inches (approx. 41 mm) |
| Strap Material | Nylon |
| Strap Color | Silver (Grey) |
| Dial Color | Grey |
| Movement Type | Miyota Quartz Analog |
| Water Resistance Depth | 5 ATM (50 Metres) |
| Closure Type | Buckle |
| Item Weight | 86.2 g (0.19 Pounds) |
| Product Dimensions (LxWxH) | 7.62 x 1.91 x 27.94 cm |
Warranty and Support
Lexon products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Lexon website.
For technical support, service, or any inquiries not covered in this manual, please contact Lexon customer service through their official channels. Please have your model number (LM128-A) and purchase details ready when contacting support.