Introduction
This manual provides instructions for the proper setup, operation, maintenance, and troubleshooting of your Taylor Digital Body Weight Scale, Model 741341033W. Please read these instructions carefully before use to ensure accurate readings and prolong the life of your scale.
Setup
1. Unpacking
Carefully remove the scale from its packaging. Inspect for any damage. Retain packaging for future storage or transport.
2. Battery Installation
Your scale requires 2 AAA batteries (included). Locate the battery compartment on the underside of the scale. Open the cover, insert the batteries according to the polarity indicators (+/-), and close the cover securely.
3. Placement
For accurate readings, place the scale on a hard, flat surface. Avoid carpets or uneven flooring, as these can affect accuracy.
4. Unit Selection
On the underside of the scale, locate the unit switch. Toggle this switch to select your preferred unit of measurement: pounds (lb), kilograms (kg), or stones (st).
Operation
1. Initializing the Scale
If the scale has been moved or if you are using it for the first time, it is recommended to initialize it. Step onto the scale briefly, then step off. The display will show '0.0' or a similar reading and then turn off. The scale is now ready for use.
2. Taking a Measurement
- Gently step onto the scale with bare feet, centering your weight. The scale will automatically turn on.
- Stand still until your weight is displayed and stabilizes. The 2.3-inch blue backlit AccuGlo LCD display provides clear visibility.
- Step off the scale. The weight will remain displayed for a few seconds before the scale automatically turns off to conserve battery life.
3. Capacity
The maximum weight capacity of this scale is 400 lbs (180 kg / 28 st).
4. Official Product Video
Video: An official product overview demonstrating the features and ease of use of the Taylor Digital Bath Scale.
Maintenance
1. Cleaning
Clean the scale with a damp cloth and mild detergent. Do not use abrasive cleaners or immerse the scale in water. Avoid harsh chemicals that may damage the finish.
2. Storage
Store the scale in a cool, dry place. Avoid storing it vertically or with heavy objects on top, as this may affect its accuracy over time.
3. Battery Care
If the scale is not to be used for an extended period, remove the batteries to prevent leakage and damage. Replace batteries when the 'LO' indicator appears on the display.
Troubleshooting
| Problem | Solution |
|---|---|
| "LO" displayed | Low battery. Replace the 2 AAA batteries. |
| Inaccurate or inconsistent readings | Ensure the scale is on a hard, flat, and level surface. Re-initialize the scale by stepping on and off before taking a measurement. Avoid moving the scale between measurements. |
| "Err" displayed | Overload indication. The weight exceeds the maximum capacity of 400 lbs (180 kg). Step off the scale immediately. |
| Scale does not turn on | Check battery installation and ensure batteries are not depleted. |
Specifications
- Model: 741341033W
- Capacity: 400 lbs (180 kg / 28 st)
- Readout Accuracy: 0.2 lbs
- Platform Dimensions: 11.8 inches x 11.8 inches
- Display: 4.2 inches x 3.3 inches Blue Backlit LCD
- Materials: Stainless Steel, Tempered Glass
- Power Source: 2 x AAA Batteries (included)
- Special Features: Auto On/Off, Low Battery Indicator
Warranty Information
Taylor products are manufactured to the highest quality standards. For specific warranty details and terms, please refer to the warranty card included with your purchase or visit the official Taylor website. Keep your purchase receipt as proof of purchase.
Support
For further assistance, product information, or to contact customer service, please visit the official Taylor website:
