Introduction
This manual provides essential instructions for the safe and effective use, setup, maintenance, and troubleshooting of your DeVilbiss Cup Touch Up, Model 54-4458. Please read this manual thoroughly before operating the product and retain it for future reference.
Product Overview
The DeVilbiss Cup Touch Up (Model 54-4458) is designed as an accessory for spray guns, specifically for touch-up applications. It provides a container for paint or other liquids to be sprayed, ensuring efficient material delivery during detailed work.
What's in the Box
- DeVilbiss Cup Touch Up (54-4458)
Figure 1: The DeVilbiss Cup Touch Up, Model 54-4458. This image shows the complete cup assembly, including the main aluminum body and the black lid with a threaded connection point at the bottom.
Setup
- Inspect Components: Before initial use, carefully inspect the cup and its lid for any damage or manufacturing defects. Ensure all parts are clean and free from debris.
- Prepare Spray Gun: Ensure your spray gun is clean and ready for use according to its own instruction manual.
- Attach Cup: Thread the DeVilbiss Cup Touch Up onto the designated connection point of your compatible spray gun. Hand-tighten until secure. Do not overtighten, as this may damage the threads or create an improper seal.
- Verify Seal: After attachment, ensure there is a tight seal between the cup and the spray gun to prevent leaks during operation.
Operating Instructions
- Fill Cup: Remove the lid from the cup. Carefully pour the desired paint or liquid into the cup. Do not overfill; leave adequate space for air pressure and mixing.
- Secure Lid: Replace the lid firmly onto the cup, ensuring it is properly seated to prevent leaks.
- Connect to Air Source: Connect your spray gun (with the attached cup) to an appropriate air compressor, following the spray gun's instructions for pressure settings.
- Test Spray: Before applying to your workpiece, perform a test spray on a scrap surface to verify proper atomization and flow. Adjust spray gun settings as needed.
- Application: Proceed with your touch-up application, maintaining consistent distance and speed for optimal results.
- Emptying: After use, disconnect the air source. Carefully remove the cup from the spray gun. Pour any remaining liquid back into its original container or dispose of it according to local regulations.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your DeVilbiss Cup Touch Up.
- Immediate Cleaning: Clean the cup immediately after each use. Residual paint or liquid can dry and become difficult to remove, affecting future performance.
- Disassembly: Separate the cup from the spray gun. Remove the lid.
- Washing: Wash the cup and lid thoroughly with an appropriate cleaning solvent for the type of material used (e.g., water for water-based paints, paint thinner for oil-based paints). Use a brush to remove any stubborn residue.
- Rinsing: Rinse all components with clean water to remove cleaning solvent and loosened debris.
- Drying: Allow all parts to air dry completely before reassembly or storage. Ensure no moisture remains, especially if storing for extended periods.
- Storage: Store the clean, dry cup in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Liquid leaks from cup connection | Cup not tightened sufficiently; damaged threads; missing or damaged seal. | Ensure cup is securely hand-tightened. Inspect threads on both cup and spray gun for damage. Check for presence and condition of any O-rings or seals; replace if damaged. |
| Poor paint flow or sputtering | Clogged cup outlet; insufficient material in cup; air leak. | Clean the cup thoroughly, especially the outlet. Ensure adequate material is in the cup. Check for proper seal at cup-to-gun connection. |
| Lid difficult to remove or attach | Dried paint/material on threads; cross-threaded. | Clean threads on both cup and lid. Ensure lid is aligned correctly before tightening. Do not force. |
If problems persist after attempting these solutions, consult the spray gun's instruction manual or contact DeVilbiss customer support.
Specifications
- Model: 54-4458
- Brand: DeVilbiss
- Item Weight: Approximately 1 pound (0.45 kg)
- Product Dimensions: Approximately 12 x 12 x 12 inches (30.48 x 30.48 x 30.48 cm) - Note: These dimensions may refer to packaging. Actual product dimensions may vary.
- Manufacturer Part Number: 54-4458
- ASIN: B00K0Y7SCE
- Date First Available: February 1, 2008
Warranty and Support
Specific warranty information for the DeVilbiss Cup Touch Up (Model 54-4458) is typically provided with the product packaging or can be obtained directly from the manufacturer. For warranty claims, technical support, or replacement parts, please contact DeVilbiss customer service through their official website or authorized distributors.
Always refer to the official DeVilbiss resources for the most accurate and up-to-date information regarding your product.
