Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Stealth Cam 8MP 30IR Game Camera, Model STC-G30. This camera is designed for capturing high-quality still images and HD video of wildlife in various outdoor conditions.
Setup
- Battery Installation:
The camera requires eight (8) AA batteries for operation. Open the camera's front cover by unlatching the side clips. Insert the batteries into the designated slots, ensuring correct polarity (+/-). Close the cover securely.
This image displays the Stealth Cam 8MP 30IR Game Camera with its front cover unlatched, revealing the control panel, LCD screen, navigation buttons, and the infrared emitters. The SD card slot and USB port are visible on the side.
- SD Card Installation:
Locate the SD card slot on the side of the camera. Insert a compatible SD card (up to 32GB) into the slot until it clicks into place. Ensure the card is inserted correctly to avoid damage. The camera will not function without an SD card.
- Mounting:
Use the included strap to secure the camera to a tree or post. Thread the strap through the mounting points on the back of the camera and tighten it firmly. Ensure the camera is stable and pointed towards the desired area for monitoring. The camera also supports wall mounting.
A side view of the camera, highlighting the robust latches that secure the front cover, ensuring weather resistance.
- Initial Power On:
After installing batteries and an SD card, switch the camera to the 'ON' position. The LCD screen will illuminate, indicating the camera is ready for configuration.
Operating the Camera
The Stealth Cam G30 features an intuitive backlit menu for easy programming.
This detailed view shows the camera's LCD screen displaying settings, along with the 'MENU', 'ENTER', and directional buttons for navigation. The power switch and test mode switch are also visible.
- Menu Navigation:
Use the 'MENU' button to access settings. Use the directional buttons (up/down) to scroll through options and 'ENTER' to select. The backlit display ensures visibility in low light.
- Setting Time and Date:
Navigate to the 'Time/Date' setting in the menu. Adjust the year, month, day, hour, and minute using the directional buttons and confirm with 'ENTER'.
- Photo/Video Modes:
Select your desired capture mode: still images or HD video. For still images, choose from 8MP, 4MP, or 2.0MP resolutions. For video, set recording duration between 5 and 180 seconds.
- Reflex Trigger:
The camera features a 0.5-second Reflex Trigger for quick capture of moving subjects.
- Matrix Blur Reduction:
This feature helps reduce motion blur in captured images, especially in challenging lighting conditions.
- Manual Shot Capability:
The camera supports manual photo capture. Refer to the on-screen menu for specific instructions on activating this feature.
- Secure Lock Password Protection:
Set a password to protect your camera settings and captured data from unauthorized access. Access this option through the menu.
- Test Mode:
Utilize the 'Test Mode' to verify camera placement and sensor detection range before deployment. This mode helps ensure optimal coverage.
- Video and USB Output:
The camera includes video output and USB output ports for connecting to external devices or transferring data.
Maintenance
- Battery Replacement:
Monitor the low battery indicator on the LCD screen. Replace all eight AA batteries when the indicator appears to ensure continuous operation and optimal performance, especially for night vision features.
- SD Card Management:
Regularly check the SD card capacity. Format the SD card periodically to maintain performance and prevent data corruption. Always back up important files before formatting.
- Cleaning:
Gently clean the camera lens and infrared emitters with a soft, dry cloth. Avoid abrasive materials or harsh chemicals. Ensure the housing is free of dirt and debris, especially around the seals, to maintain weather resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not powering on | Incorrect battery installation, dead batteries, faulty SD card. | Check battery polarity, replace with fresh batteries, remove and reinsert SD card or try a different one. |
| Poor image/video quality at night | Low battery power, subject too far, dirty lens/IR emitters. | Replace batteries, ensure subject is within 80ft IR range, clean lens and IR emitters. |
| Excessive false triggers | Camera positioned in direct sunlight, near moving branches, or heat sources. | Reposition camera to avoid direct sunlight or moving foliage. Adjust sensitivity settings if available. |
| SD card error | Improperly inserted card, incompatible card, corrupted card. | Reinsert SD card, ensure it's a compatible type (up to 32GB), format the card (after backing up data), or try a new SD card. |
Specifications
| Feature | Detail |
|---|---|
| Megapixels | 8.0 MP (3 resolutions: 8MP/4MP/2.0MP) |
| Video Recording | HD Video, 5-180 seconds duration |
| IR Emitters | 30 IR Emitters |
| IR Range | 80 feet |
| Trigger Speed | 0.5 seconds (Reflex Trigger) |
| Memory Card | SD Card slot (up to 32GB) |
| Power Source | 8 AA Batteries |
| Connectivity | USB Output, Video Output |
| Dimensions (LxWxH) | 5.5 x 2.83 x 4.25 inches |
| Weight | 11.36 ounces |
| Weather Protection | IP54 International Protection Rating |
Warranty Information
Stealth Cam products are covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your product or visit the official Stealth Cam website.
Support
For additional assistance, frequently asked questions, or to access further resources, please visit the official Stealth Cam support page or refer to the QR code link provided on the camera for quick access to instructional videos and support:
You can also visit the Stealth Cam Store on Amazon for more product information.
