HuBDIC FS-300 Non-Contact Infrared Forehead Thermometer User Manual

1. Introduction

Thank you for choosing the HuBDIC FS-300 Non-Contact Infrared Forehead Thermometer. This device is designed for safe and accurate temperature measurement for both adults and children. Please read this manual thoroughly before use to ensure proper operation and to maintain the device's longevity.

Image: HuBDIC FS-300 Non-Contact Infrared Forehead Thermometer in gold color.

2. Key Features

• Non-Contact Measurement: Safely measure temperature without physical contact, ideal for sleeping individuals.
• Fast and Accurate: Provides precise readings in approximately one second.
• Memory Function: Stores the last 32 temperature readings for easy tracking.
• Versatile Use: Suitable for measuring body temperature, room temperature, bath water, and bottle temperatures.
• Fever Alarm: Features an LCD display with three patterns to indicate normal, slight fever, or fever conditions.
• Backlight Display: Allows for easy reading in low-light conditions.
• Mute Mode: Option to silence sounds for undisturbed measurements.
• Automatic Shut-off: Conserves battery life by turning off after 1 minute of inactivity.

Image: Overview of HuBDIC FS-300 thermometer features.

3. Package Contents

Ensure all items are present upon unboxing:

• HuBDIC FS-300 Non-Contact Infrared Forehead Thermometer
• AAA battery x 2
• User Manual (this document)

4. Setup

4.1. Installing Batteries

1. Locate the battery compartment cover on the back of the thermometer.
2. Slide the cover open.
3. Insert two AAA batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

4.2. Initial Power On

After installing batteries, the thermometer will perform a self-test and display the last measured temperature or a default reading. It is now ready for use.

5. Operating Instructions

5.1. Device Overview

Image: Labeled diagram of the HuBDIC FS-300 thermometer components.

• Probe: Infrared sensor for temperature detection.
• LCD Display: Shows temperature readings, mode, and other indicators.
• Power/Scan Button: Powers on the device and initiates temperature measurement.
• MODE Button: Switches between Body and Object measurement modes.
• MEM Button: Accesses memory records of previous measurements.
• Sound Button: Toggles mute function (sound on/off).
• Stand: For convenient storage of the thermometer.

5.2. Taking a Body Temperature Measurement

1. Ensure the thermometer is in Body Mode. Press the MODE button to switch if necessary.
2. Hold the thermometer approximately 0-2 inches (0-5 cm) from the center of the forehead.
3. Press the Power/Scan button once.
4. The temperature reading will appear on the LCD screen within one second.
5. The display color will indicate the temperature status:
   • Green: Normal temperature (~99.2°F / ~37.3°C)
   • Orange: Slight fever (99.3°F ~ 100.2°F / 37.4°C ~ 37.9°C)
   • Red: Fever (100.4°F ~ / 38.0°C ~)

Image: Taking a non-contact temperature reading from a sleeping child.

Image: Fever warning icon and temperature ranges for normal, slight fever, and fever.

5.3. Measuring Object/Surface Temperature

1. Press the MODE button to switch to Object Mode. The display will show an object icon.
2. Point the thermometer at the object (e.g., bath water, baby milk bottle) you wish to measure.
3. Press the Power/Scan button once.
4. The temperature reading of the object's surface will appear on the LCD screen.

Image: Demonstrating multiple uses of the thermometer for body, object (bottle), and water temperature.

5.4. Switching Between Celsius and Fahrenheit

To switch between Celsius (°C) and Fahrenheit (°F):

1. With the thermometer powered on, press and hold the MODE and MEM buttons simultaneously for 3 seconds.
2. The unit will change on the display. Repeat the process to switch back.

Image: Instructions for switching between Celsius and Fahrenheit, and activating mute function.

5.5. Mute Function

To activate or deactivate the mute function:

1. Press the Sound button (speaker icon) located on the side of the thermometer.
2. An icon on the display will indicate whether the sound is on or off.

5.6. Memory Recall

The thermometer stores the last 32 temperature readings.

1. Press the MEM button to view previous readings.
2. Each press of the MEM button will cycle through the stored readings.

6. Maintenance

6.1. Cleaning the Thermometer

• Wipe the thermometer body with a soft, dry cloth.
• For the probe, gently wipe with an alcohol swab or a cloth dampened with alcohol. Allow to air dry.
• Do not immerse the thermometer in water or any cleaning solutions.
• Avoid using abrasive cleaners or harsh chemicals.

6.2. Storage

• Store the thermometer in a cool, dry place, away from direct sunlight and extreme temperatures.
• If not in use for an extended period, remove the batteries to prevent leakage.
• Utilize the provided stand for convenient and safe storage.

7. Troubleshooting

8. Specifications

9. Product Videos

10. Warranty Information

HuBDIC products are manufactured under strict quality standards. For specific warranty details, please refer to the warranty card included in your product packaging or visit the official HuBDIC website. Keep your purchase receipt as proof of purchase for warranty claims.

11. Customer Support

For any questions, technical assistance, or support regarding your HuBDIC FS-300 thermometer, please contact our customer service team:

• Website: Visit the official HuBDIC website for FAQs and support resources.
• Email: Refer to your product packaging for customer support email address.
• Phone: Refer to your product packaging for customer support phone number.

Please have your model number (FS-300) and purchase date ready when contacting support.