Product Overview
The DANCO All-in-One Drain Trip Lever Conversion Kit in Chrome is designed to repair worn-out or non-functioning trip lever tub drain mechanisms and update the appearance of your bathtub. This complete kit facilitates an easy do-it-yourself project, restoring your tub drain to like-new condition. It is suitable for replacing standard trip-lever drain trims and overflow plates, and includes a bushing adapter for compatibility with most standard tub drains (1-1/2 inch or 1-3/4 inch drain shoe sizes).
Key Features:
- Designed to fit 1-1/2 inch and 1-7/8 inch tub drain shoe sizes.
- 2-hole overflow face plate replaces existing standard trip lever faceplates.
- Trip lever mechanism allows for easy opening and closing of the drain.
- Bathtub strainer effectively catches hair and debris while allowing water to flow freely.
- Constructed from durable brass for strength and longevity.
- Features a classic Chrome finish to complement bathroom decor.
Included Components
The DANCO All-in-One Drain Trip Lever Conversion Kit includes the following parts:
Complete Kit: Includes the 2-hole face plate, strainer, overflow plate, bath shoe, threaded adapter, and screws.
Trip Lever Overflow Plate: The visible plate with the lever mechanism that controls the drain stopper.
Drain Strainer: The perforated cover for the drain opening, designed to catch debris.
Bath Shoe & Threaded Adapter: The main drain body that threads into the tub's drain pipe, with an adapter for different sizes.
Installation Guide
Tools Needed:
- Phillips Head Screwdriver
- Plumber's Putty
- Pliers
Step-by-Step Installation:
- Remove Old Trip Lever Plate: Use a Phillips head screwdriver to unscrew and remove the old trip lever overflow plate from the bathtub.
- Remove Old Drain Assembly: Use pliers to grip and unscrew the old drain assembly from the tub. Remove any old plumber's putty or debris from the drain opening.
- Prepare New Drain Shoe: If necessary, remove the thread bushing from the new drain shoe to adjust for proper fitting into your drain. Apply a bead of plumber's putty around the lip of the new bath shoe.
- Thread Shoe into Drain: Carefully thread the new bath shoe into the tub's drain opening. Use pliers to tighten it securely, ensuring a watertight seal with the plumber's putty.
- Attach Strainer Plate: Place the new strainer plate over the drain shoe. Insert the provided screw into the center of the strainer plate and tighten it with a Phillips head screwdriver.
- Prepare New Trip Lever Plate: If the linkage assembly is separate, attach it to the new trip lever plate using the cotter pin.
- Insert Trip Lever Assembly: Carefully insert the trip lever assembly and linkage down into the overflow pipe.
- Screw in New Trip Lever Plate: Align the new trip lever overflow plate with the screw holes on the tub. Insert and tighten the screws with a Phillips head screwdriver to secure the plate.
Installation Video Guide
This video demonstrates the installation process for the Danco Trip Lever Overflow Plate & Stopper Assembly. It covers removing old components, preparing new parts, and securing the new assembly.
Operating Instructions
The DANCO All-in-One Drain Trip Lever Conversion Kit operates simply:
- To close the drain and fill the tub with water, simply lift up on the trip lever located on the overflow faceplate.
- To open the drain and allow water to flow out, push down on the trip lever.
Maintenance
To ensure the longevity and optimal performance of your DANCO Drain Trip Lever Conversion Kit:
- Regularly clean the chrome finish with a soft cloth and mild, non-abrasive cleaner to maintain its shine.
- Periodically remove the drain strainer to clear any accumulated hair and debris, preventing clogs and ensuring free water flow.
- Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the finish and components.
Troubleshooting
While this product is designed for reliable performance, here are some common issues and potential solutions:
- Drain not sealing properly: Ensure the plumber's putty was applied correctly and the drain shoe is tightened securely. Check for any debris preventing the stopper from fully closing.
- Water draining slowly: Remove the strainer and clear any hair or debris that may be obstructing the flow.
- Lever mechanism feels loose or unresponsive: Verify that the cotter pin connecting the linkage to the trip lever plate is securely in place and that the screws holding the overflow plate are tight.
For persistent issues, refer to the support section for further assistance.
Product Specifications
| Attribute | Detail |
|---|---|
| Brand | Danco |
| Model Number | 80977 |
| Color | Chrome |
| Item Dimensions (L x W x H) | 2.97 x 4.91 x 8.82 inches |
| Item Weight | 6.9 ounces |
| Recommended Uses | Bathtub |
| Number of Pieces | 2 |
| Finish Type | Chrome |
| Material | Brass construction |
| Drain Shoe Compatibility | 1-1/2 inch or 1-3/8 inch (with threaded adapter bushing) |
| Overflow Plate Holes | 2-inches on center |
| UPC | 037155809776 |
Warranty Information
This DANCO product comes with a Limited 1-Year Warranty. For specific details regarding warranty coverage and claims, please refer to the documentation included with your purchase or contact Danco customer support.
Support & Contact
For additional assistance, questions, or to report any issues with your DANCO All-in-One Drain Trip Lever Conversion Kit, please visit the official Danco website or contact their customer service department. You may also find helpful resources and FAQs on their support pages.
Online Resources: www.danco.com
