1. Introduction
This manual provides comprehensive instructions for the safe and effective use of Smith & Nephew Remove Adhesive Remover Wipes, Model 403100. These wipes are designed to gently and efficiently remove medical adhesives from the skin, such as those used with ostomy appliances, continuous glucose monitors (CGMs), and insulin pumps.
Please read this manual thoroughly before using the product and retain it for future reference.
2. Safety Information
WARNING: For external use only. Avoid contact with eyes. Keep out of reach of children.
- Do not use on open wounds or irritated skin.
- Discontinue use if irritation, redness, or rash occurs. Consult a healthcare professional if symptoms persist.
- Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is not a dietary supplement.
- Individuals with sensitive skin may experience reactions. A review indicated that this product may not be suitable for those with very sensitive skin, potentially causing a rash. Perform a patch test on a small area of skin if you have known sensitivities.
3. Product Description
Smith & Nephew Remove Adhesive Remover Wipes are individually packaged, pre-moistened wipes formulated to dissolve medical adhesive residues quickly and painlessly. Each pack contains 50 wipes, with a total of 150 sheets across three packs. The wipes feature a pleasant scent and are designed for gentle application.

Image 1: A pack of Smith & Nephew Remove Adhesive Remover Wipes. The packaging indicates 50 wipes per box.
4. Setup and Preparation
- Inspect Packaging: Before use, ensure the individual wipe packet is sealed and undamaged. Do not use if the packet is torn or open.
- Gather Supplies: Have the adhesive remover wipe, a clean cloth or tissue, and any new medical device ready for application if applicable.
- Wash Hands: Always wash your hands thoroughly with soap and water before handling medical supplies.
5. Operating Instructions
Follow these steps for effective and gentle adhesive removal:
- Open Wipe Packet: Tear open one individual foil packet at the notch to expose the pre-moistened wipe.
- Apply to Adhesive: Gently wipe around the edges of the adhesive being removed. Allow the solution to work its way under the adhesive. Do not pull or tug at the skin.
- Remove Device: As the adhesive loosens, carefully peel the medical device or dressing away from the skin. Continue to use the wipe to help dissolve any remaining adhesive as you peel.
- Clean Skin: Once the device is removed, use the wipe to gently clean any residual adhesive from the skin.
- Rinse and Dry: After removing all adhesive, gently rinse the skin with water and pat dry. Ensure the skin is completely dry before applying any new medical devices or dressings.

Image 2: A close-up view of a single Remove Adhesive Remover Wipe, demonstrating its texture and moisture.
Video Demonstration
Video 1: A demonstration of how to effectively use Smith & Nephew Remove Adhesive Remover Wipes for medical adhesive removal. This video provides a visual guide to the application process.
Video 2: An additional video showcasing the gentle action of the adhesive remover wipes on skin. This video highlights the product's ease of use and skin compatibility.
6. Maintenance and Storage
- Storage: Store wipes in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
- Disposal: Dispose of used wipes and empty packets in accordance with local regulations for medical waste. Do not flush wipes down the toilet.
- Shelf Life: Refer to the expiration date printed on the packaging. Do not use expired wipes.
7. Troubleshooting
- Adhesive Not Fully Removed: If some adhesive residue remains, apply another wipe and gently rub the area. Allow a few moments for the solution to work before wiping again. Avoid excessive scrubbing.
- Skin Irritation: If you experience redness, itching, or discomfort, immediately discontinue use and rinse the affected area with water. If irritation persists, consult a healthcare professional.
- Wipe Appears Dry: Ensure packets are sealed before use. If a wipe appears dry, it may have lost its moisture. Do not use dry wipes as they will not be effective.
8. Specifications
| Brand | Smith & Nephew |
| Model Number | 403100 |
| Item Form | Wipes |
| Package Information | Packet |
| Sheet Count | 50 per pack (150 total in a pack of 3) |
| Scent | Pleasant scent |
| Package Dimensions | 7.32 x 4.41 x 2.83 inches |
| Weight | 15.2 ounces |
| Date First Available | April 8, 2014 |
| Manufacturer | Smith and Nephew, Inc. |
9. Warranty and Support
Specific warranty information for Smith & Nephew Remove Adhesive Remover Wipes is not provided in this manual. For any product-related inquiries, technical support, or to report adverse events, please contact Smith & Nephew directly:
- Manufacturer: Smith and Nephew, Inc.
- Website: www.smith-nephew.com (Note: This is a general link to the manufacturer's website, specific support contact details may vary by region.)
Always refer to the product packaging for the most current contact information and any specific warranty details that may apply.