Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Wildgame Innovations Crush Cell 8 Lightsout Digital Trail Camera, Model C8B5. Please read this manual thoroughly before using your camera to ensure proper function and longevity.
Product Overview
Key Features
- 8 Megapixel (MP) camera for high-resolution images.
- 70 ft. flash range with 60-piece high-intensity infrared (IR) invisible LEDs for discreet night vision.
- Wireless image transmission via MMS (compatible with GSM providers with 3G speed capability).
- 2.4-inch color screen for easy viewing and menu navigation.
- Compact, water-resistant, and weather-endurable housing with Realtree Xtra camo finish.
- Photo and HD 720p video capabilities (up to 30 seconds per clip).
- Supports up to a 32GB SD/SDHC card.
- 1-second trigger speed for capturing fast-moving subjects.
- Time Lapse technology for extended monitoring.
Camera Components
Familiarize yourself with the main components of your trail camera:
Figure 1: Front View of the Crush Cell 8 Camera. This image displays the front of the Wildgame Innovations Crush Cell 8 Lightsout Digital Trail Camera, featuring the main lens, infrared LEDs, the 2.4-inch color display screen, control buttons, and the cellular antenna at the top. The camera is encased in a Realtree Xtra camouflage pattern.
Figure 2: Camera in Use. This image shows two individuals, one holding the Wildgame Innovations Crush Cell 8 trail camera and the other viewing content on a tablet, demonstrating the camera's use in a field setting. The camera's compact design and camouflage finish are visible.
Setup
1. Battery Installation
- Locate the battery compartment on the camera.
- Open the compartment and insert four (4) D-cell batteries, ensuring correct polarity (+/-).
- Close the battery compartment securely to maintain water resistance.
2. SD Card Installation
- Ensure the camera is powered off.
- Locate the SD card slot.
- Insert an SD/SDHC card (up to 32GB) into the slot until it clicks into place. Ensure the card is inserted in the correct orientation.
- To remove, gently push the card in until it springs out.
3. Mounting the Camera
The Crush Cell 8 camera is designed with a durable, water-resistant housing that can be mounted to various surfaces, including trees. Use the provided mounting strap or a compatible mounting accessory to secure the camera at the desired height and angle for optimal coverage of your target area.
Operating Instructions
1. Power On/Off
- To power on, slide the power switch to the "ON" position. The 2.4-inch color screen will illuminate.
- To power off, slide the power switch to the "OFF" position.
2. Menu Navigation
Use the control buttons located next to the display screen to navigate through the camera's menu options. The 2.4-inch color screen provides a clear interface for adjusting settings.
3. Photo and Video Modes
- Photo Mode: Captures 8MP still images. You can adjust settings such as resolution, burst mode, and delay.
- Video Mode: Records HD 720p video clips, up to 30 seconds in length. Settings for video resolution and length can be configured.
- Time Lapse: Set the camera to capture images at predefined intervals over an extended period.
4. Wireless MMS Functionality
The Crush Cell 8 supports wireless image transmission via MMS. This feature requires a compatible SIM card (not included) from a GSM provider with 3G speed capability. Refer to the camera's on-screen menu for specific cellular setup instructions, including APN settings and recipient numbers.
Maintenance
Cleaning
- Gently wipe the camera lens and IR LEDs with a soft, lint-free cloth to remove dirt or smudges.
- Clean the camera body with a damp cloth. Avoid using harsh chemicals or abrasive materials.
- Ensure all compartments are sealed before cleaning to prevent water ingress.
Storage
When not in use, store the camera in a cool, dry place. Remove batteries if storing for extended periods to prevent leakage and damage.
Troubleshooting
- Camera not powering on: Check battery orientation and ensure batteries are fully charged.
- Poor image/video quality: Clean the camera lens. Ensure sufficient lighting or proper IR flash settings for night captures.
- SD card error: Ensure the SD card is properly inserted and formatted. Try a different compatible SD/SDHC card.
- No wireless transmission: Verify SIM card installation, cellular signal strength, and correct MMS settings in the camera menu. Contact your GSM provider for network-specific settings if needed.
Specifications
| Model Number | C8B5 |
| Image Resolution | 8 Megapixels |
| Video Resolution | HD 720p (30 seconds) |
| Flash Type | Infrared (60-piece invisible LEDs) |
| Flash Range | 70 Feet |
| Trigger Speed | 1 Second |
| Display Screen | 2.4 Inches, Color |
| Memory Card Support | SD/SDHC up to 32GB |
| Wireless Communication | MMS (GSM 3G compatible) |
| Batteries | 4 D-cell batteries (not included) |
| Water Resistance | Water Resistant |
| Dimensions (L x W x H) | 30.5 x 12.7 x 35.6 Centimetres |
| Item Weight | 68 g |
| Material | Metal |
Official Product Videos
No official product videos from the seller were provided for this model. Please refer to the written instructions and diagrams for guidance.
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Wildgame Innovations website. Contact their customer service for assistance with product issues or inquiries.
