Introduction
The LUVERNE Textured Rubber Mud Guards are designed to provide robust protection for your vehicle against road debris such as rocks, mud, and gravel. Constructed from heavy-duty, recycled rubber and featuring durable stainless steel accent plates, these mud guards help maintain the aesthetic and structural integrity of your truck's body. They are engineered for a vehicle-specific fit, ensuring optimal coverage and a seamless appearance.
This image displays the two LUVERNE Textured Rubber Mud Guards, showcasing their black textured rubber material and the polished stainless steel plates at the bottom.
Package Contents
Upon opening the package, verify that all components are present and undamaged:
- Two (2) LUVERNE Textured Rubber Mud Guards
- Corrosion-resistant fasteners
- High-strength galvanized steel mounting brackets (pre-attached or separate, depending on vehicle application)
An illustrative diagram pointing out key features of the mud guards, including their heavy-duty construction, vehicle-specific design, material thickness, and the stainless steel plates.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 250933 |
| Material | 3/8-inch thick recycled rubber with 18-gauge stainless steel plates |
| Color | Black (rubber), Polished (stainless steel) |
| Dimensions (Approximate) | 12 inches (width) x 23 inches (height) |
| Installation Type | Bolt-On, Vehicle-Specific |
| Auto Part Position | Rear |
| Compatibility | Select model years of Ram 1500, 2500, 3500 and Dodge Ram 1500 |
| Item Weight | 8.63 pounds |
A technical drawing illustrating the approximate dimensions of the mud guards, indicating a height of 23 inches and a width of 12 inches.
Setup and Installation
Before You Begin
Ensure your vehicle is parked on a level surface with the engine off and the parking brake engaged. Allow the vehicle to cool down if it has been recently driven. Gather the necessary tools:
- Socket wrench set
- Drill (if new mounting holes are required for your specific vehicle model)
- Measuring tape
- Marker or pencil
- Safety glasses
- Gloves
Installation Steps
Follow these general steps for installing your LUVERNE Mud Guards. Specific vehicle models may have slight variations; refer to your vehicle's owner's manual or a professional if unsure.
- Positioning: Hold the mud guard against the rear wheel well of your truck to determine the optimal placement. Ensure it aligns with the vehicle's contours and provides adequate coverage.
- Marking Holes: Using the pre-drilled holes on the mud guard as a template, mark the corresponding drilling points on your vehicle's fender liner or frame. For some vehicle-specific applications, existing factory holes may be utilized.
- Drilling (if necessary): If new holes are required, carefully drill pilot holes at the marked locations. Ensure the drill bit size is appropriate for the provided fasteners.
- Attaching Brackets: Secure the galvanized steel mounting brackets to the vehicle using the corrosion-resistant fasteners. Do not fully tighten at this stage.
- Mounting Mud Guard: Align the mud guard with the attached brackets and secure it using the remaining fasteners.
- Final Tightening: Once both mud guards are in place and properly aligned, fully tighten all fasteners to ensure a secure and stable installation.
This image shows a LUVERNE mud guard properly installed on the rear of a truck, demonstrating its robust appearance and how it extends down to protect the vehicle's body from debris.
An image of the mud guard fitted onto a truck, illustrating its vehicle-specific design that ensures a precise and integrated fit with the vehicle's contours.
A close-up view of the polished 18-gauge stainless steel plate located at the base of the mud guard, designed to provide additional protection and a stylish accent.
Operation
The LUVERNE Textured Rubber Mud Guards operate passively by deflecting debris away from your vehicle's body. Once properly installed, they require no active engagement. Their robust construction ensures continuous protection during driving, whether on paved roads or off-road terrains. The textured surface is designed to effectively hide minor scuffs and grime, maintaining a cleaner appearance.
A detailed close-up shot of the mud guard's surface, emphasizing the 3/8-inch thick recycled rubber and its textured finish designed to hide minor scuffs.
Maintenance
To ensure the longevity and continued effectiveness of your LUVERNE Mud Guards, periodic maintenance is recommended:
- Cleaning: Regularly wash the mud guards with soap and water to remove accumulated dirt, mud, and road salt. A soft brush can be used for textured surfaces. Rinse thoroughly.
- Inspection: Periodically inspect the mud guards and their mounting hardware for any signs of wear, damage, or loosening. Check the stainless steel plates for any corrosion or damage.
- Tightening Fasteners: If any fasteners appear loose, re-tighten them to ensure the mud guards remain securely attached to the vehicle.
- Damage Assessment: In case of significant impact or damage, assess the integrity of the mud guard and its mounting system. Replace components if necessary to maintain optimal protection.
Troubleshooting
This section addresses common issues you might encounter with your mud guards.
| Problem | Possible Cause | Solution |
|---|---|---|
| Mud guard appears loose or rattles. | Loose mounting fasteners. | Inspect all mounting points and tighten any loose bolts or screws. |
| Mud guard does not fit perfectly. | Incorrect vehicle application or minor manufacturing variance. | Double-check the product's compatibility with your specific vehicle model and year. Minor adjustments or additional drilling may be required for optimal fitment in some cases. If significant issues persist, contact customer support. |
| Excessive debris accumulation on vehicle body despite mud guards. | Improper installation angle or insufficient coverage for specific driving conditions. | Verify the mud guards are installed at the correct angle and position. While designed for protection, extreme off-road conditions may still result in some debris. |
Warranty Information
LUVERNE products are manufactured to high standards and are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms, conditions, and duration, please refer to the official LUVERNE website or contact customer support. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with installation, or need to report a product issue, please contact LUVERNE customer support:
- Website: Visit the official LUVERNE website for FAQs, product information, and contact forms. www.luverne.com
- Phone: Refer to the contact section on the LUVERNE website for phone numbers.
- Email: Use the contact form on the LUVERNE website for email inquiries.
When contacting support, please have your product model number (250933) and purchase details readily available.
