D-Link DAP-1650 AC1200 Dual Band Gigabit WiFi Range Extender User Manual

Introduction

The D-Link DAP-1650 Wireless AC1200 Gigabit Range Extender is designed to enhance the Wi-Fi coverage and signal strength of your existing wireless network. This device supports next-generation 802.11AC wireless connectivity and includes four Gigabit Ethernet ports, providing high-speed connections for streaming HD video and connecting multiple devices. The DAP-1650 offers flexible operation modes, functioning as a Wi-Fi range extender, access point, or media bridge, making it adaptable to various network environments. Setup is simplified through either a WPS button press or the QRS Mobile app on your iOS or Android device.

Product Overview

Image: Front view of the D-Link DAP-1650 AC1200 WiFi Range Extender, a sleek black cylindrical device with two indicator lights.

Image: Infographic highlighting key features of the DAP-1650, including speeds up to 400Mbps (2.4GHz) + 867Mbps (5GHz), simultaneous dual band, HD/4K media streaming, and superior range.

Key Features:

• Simultaneous Dual Band Wi-Fi: Extends both 2.4 GHz and 5 GHz Wi-Fi networks concurrently for enhanced flexibility and reduced interference.
• Superior Range: Utilizes Multiple-Input Multiple-Output (MIMO) technology to provide extensive coverage, reaching hard-to-access areas.
• Gigabit Ethernet Ports: Equipped with 4 Gigabit LAN ports for high-speed wired connections, ideal for gaming consoles, smart TVs, and other network devices.
• Wi-Fi Protected Setup (WPS): Features a push-button for easy and secure connection to a wireless network.
• Flexible Compatibility: Works with virtually any wireless router brand.
• Backward Compatible: Supports Wireless 802.11n/g/b/a standards.
• Secure Wireless Encryption: Offers WPA or WPA2 security protocols.

What's in the Box:

• DAP-1650 WiFi Extender
• Ethernet Cable (1M)
• PSU (12V/2A)
• Wi-Fi Configuration Card
• Quick Install Guide

Setup

Setting up your D-Link DAP-1650 can be done quickly using either the WPS button or the QRS Mobile app. Follow the steps below for a seamless installation.

1. Physical Connection and Initial Placement

1. Plug the DAP-1650 into a power outlet near your existing wireless router.
2. Wait for the Power LED on the extender to turn solid.

Image: Rear view of the D-Link DAP-1650, showing the USB 2.0 port, WPS button, 4 Gigabit LAN ports, Power button, and AC power socket.

Image: Diagram illustrating the one-touch WPS setup process: 1. Press WPS on router, 2. Press WPS on range extender, 3. Devices connect.

2. WPS (Wi-Fi Protected Setup) Method

1. Press the WPS button on your existing wireless router.
2. Within two minutes, press the WPS button on your DAP-1650 Range Extender.
3. The Wi-Fi signal indicator lights on the DAP-1650 will illuminate, indicating a successful connection.
4. Once connected, you can unplug the DAP-1650 and move it to a central location within the desired coverage area. Ensure the signal indicator lights remain solid blue for optimal performance.

3. QRS Mobile App Setup (for iOS/Android)

1. Download the D-Link QRS Mobile app from the App Store (iOS) or Google Play (Android).
2. Connect your mobile device to the DAP-1650's default Wi-Fi network (found on the Wi-Fi Configuration Card).
3. Launch the QRS Mobile app and follow the on-screen instructions to configure your extender.

4. Web Browser Setup

1. Connect your computer to the DAP-1650's default Wi-Fi network or via an Ethernet cable.
2. Open a web browser and enter "http://dlinkap.local" or the IP address (found in the Quick Install Guide) into the address bar.
3. Follow the on-screen setup wizard to configure your extender.

Operating Modes

The D-Link DAP-1650 offers multiple operation modes to suit your networking needs:

• Wi-Fi Range Extender Mode: Extends the coverage of your existing Wi-Fi network, eliminating dead zones and improving signal strength in areas with weak coverage. This is the most common mode for home users.
• Access Point (AP) Mode: Connects to a wired network (e.g., via an Ethernet cable from your router) and broadcasts a new Wi-Fi signal, effectively creating a new wireless network or expanding an existing wired network wirelessly.
• Media Bridge Mode: Connects wired devices (like gaming consoles, smart TVs, or desktop PCs) to your wireless network. The DAP-1650 acts as a wireless adapter for these devices, allowing them to access the internet without needing a direct Ethernet connection to the main router.

Image: Diagram showing the D-Link DAP-1650 extending Wi-Fi coverage from an existing router to eliminate dead zones throughout a house, illustrating both 2.4GHz and 5GHz Wi-Fi signals.

Specifications

Troubleshooting

If you encounter issues with your D-Link DAP-1650, try the following steps:

• No Power: Ensure the power adapter is securely connected to both the extender and a working power outlet.
• No Internet Connection:
  • Verify that your main router has an active internet connection.
  • Check the signal indicator lights on the DAP-1650. If they are not solid blue, try moving the extender closer to your main router.
  • Restart both your main router and the DAP-1650.
• Weak Signal:
  • Relocate the DAP-1650 to a position roughly halfway between your router and the Wi-Fi dead zone.
  • Avoid placing the extender near large metal objects, concrete walls, or other devices that emit radio frequency interference (e.g., microwaves, cordless phones).
• Cannot Access Setup Page:
  • Ensure your device is connected to the DAP-1650's Wi-Fi network or via an Ethernet cable.
  • Try clearing your browser's cache and cookies, or use a different web browser.
  • Confirm you are using the correct address: "http://dlinkap.local" or the IP address.
• Factory Reset: If all else fails, you can perform a factory reset by pressing and holding the reset button (usually a small pinhole on the back) for about 10 seconds until the Power LED blinks. This will restore the device to its default settings, and you will need to reconfigure it.

Maintenance

To ensure optimal performance and longevity of your D-Link DAP-1650, consider the following maintenance tips:

• Firmware Updates: Regularly check the D-Link support website for firmware updates. Keeping your device's firmware up-to-date can improve performance, add new features, and enhance security.
• Cleaning: Keep the device clean and free from dust. Use a soft, dry cloth to wipe the exterior. Avoid using liquid cleaners or abrasive materials.
• Ventilation: Ensure the device is placed in a well-ventilated area, away from direct sunlight and heat sources, to prevent overheating.
• Restart Periodically: Occasionally restarting the extender (unplugging it for 10 seconds and plugging it back in) can help resolve minor issues and improve overall stability.

Official Product Videos

Warranty and Support

For detailed warranty information and technical support, please refer to the official D-Link website or contact D-Link customer service. The Quick Install Guide included with your product also contains specific warranty terms and contact details.

You can visit the D-Link Store on Amazon for more product information and resources.