Introduction
The Compustar CS800-S is a 1-way remote start system designed to provide convenience and comfort for your vehicle. This system allows you to remotely start your engine, lock and unlock doors, and activate the trunk release from a distance of up to 1000 feet. It is compatible with various vehicle types, including diesel engines, and can be upgraded with DroneMobile for smartphone control and GPS tracking.
Key Features:
- 1-Way Remote Start System with Keyless Entry
- Two 4-button transmitters with LED indicators
- Operating range of up to 1000 feet
- Cold/Hot automatic engine start capability
- Diesel-engine ready
- DroneMobile Ready (requires DR-3400 module, sold separately)
Product Components
The Compustar CS800-S system typically includes the following components:
- Main Control Module (CM600-S)
- Two 4-Button Remote Transmitters
- Antenna
- Wiring Harnesses
- Installation Manual and User Guide
- Hood Pin Switch

Image: Complete Compustar CS800-S remote start system kit, including the control module, two remote transmitters, wiring, and antenna.

Image: Two Compustar 4-button remote transmitters with key rings and carabiner clips. Each remote features lock, unlock, remote start, and trunk release buttons.

Image: The Compustar CM600-S control module, a gray rectangular unit with various wiring ports. A warning label indicates it is for automatic transmission only.

Image: Various wiring harnesses and a hood pin switch included with the Compustar system, essential for installation and safety features.

Image: The Compustar antenna, installation manual, and warning stickers, part of the complete remote start kit.
Setup and Installation
Installation of the Compustar CS800-S remote start system requires technical knowledge of automotive electrical systems. For optimal performance and to ensure proper functionality and safety, professional installation by an authorized Compustar dealer is highly recommended.
Important Considerations:
- Vehicle Compatibility: While the CS800-S is a universal kit, newer vehicles (typically 1996-98 and newer) may require an additional bypass module (e.g., iDatalink ALCA transponder) to integrate with the vehicle's anti-theft or immobilizer system. Consult an authorized installer or the iDatalink website for specific vehicle requirements.
- Wiring Diagrams: Access to accurate wiring diagrams for your specific vehicle's year, make, and model is crucial for correct installation.
- Safety Precautions: Ensure the vehicle's battery is disconnected before beginning any wiring. Follow all safety guidelines provided in the installation manual.
- Antenna Placement: The antenna should be mounted in a location that maximizes signal reception, typically on the windshield, away from metal obstructions.
Refer to the detailed installation manual included with your product for specific wiring instructions and programming steps.
Operating Instructions
The Compustar CS800-S system is operated using the included 4-button remote transmitters.
Remote Functions:
- Remote Start: To remotely start your vehicle, press and hold the KEY button (often depicted as a car icon with an arrow) for approximately 2.5 seconds. The vehicle's parking lights will flash, indicating the command has been received, and the engine will start. The engine will run for a preset duration (typically 15-20 minutes) or until manually shut off.
- Keyless Entry (Lock): To lock your vehicle's doors, press the LOCK button (often depicted as a closed padlock icon). The vehicle's lights may flash once, and a chirp may sound to confirm locking.
- Keyless Entry (Unlock): To unlock your vehicle's doors, press the UNLOCK button (often depicted as an open padlock icon). The vehicle's lights may flash twice, and two chirps may sound to confirm unlocking.
- Trunk Release: To open your vehicle's trunk or activate a power liftgate, press and hold the TRUNK button (often depicted as a trunk icon) for approximately 2.5 seconds.
- Panic Mode: (If available) Press and hold the LOCK or UNLOCK button for an extended period (e.g., 3 seconds) to activate the vehicle's alarm. Press any button again to deactivate.
The remote's LED indicator will provide visual feedback on command transmission and system status.
DroneMobile Integration (Optional):
The CS800-S system is DroneMobile Ready. By pairing it with a DR-3400 module (sold separately), you can add smartphone control and GPS tracking capabilities to your vehicle. This allows you to control your remote start system from virtually anywhere using your smartphone.
Maintenance
Regular maintenance helps ensure the longevity and reliable operation of your Compustar CS800-S system.
- Remote Battery Replacement: If the remote's range decreases or the LED indicator becomes dim, it may be time to replace the battery. Refer to the remote's specific instructions for battery type and replacement procedure.
- Keep Remotes Dry: Avoid exposing remote transmitters to water or excessive moisture, as this can damage internal components.
- System Check: Periodically test all remote functions (remote start, lock, unlock, trunk release) to ensure they are working correctly.
- Professional Inspection: Consider having your system inspected by an authorized Compustar dealer if you notice any unusual behavior or decreased performance.
Troubleshooting
If you encounter issues with your Compustar CS800-S system, review the following common troubleshooting steps. For complex problems, contact an authorized Compustar dealer.
- Remote Start Not Activating:
- Ensure the vehicle doors are closed, the hood is closed, and the parking brake is engaged (if applicable).
- Check the remote battery.
- Verify you are within the 1000-foot operating range. Obstructions can reduce range.
- For vehicles with immobilizers, ensure the bypass module is functioning correctly.
- Reduced Remote Range:
- Replace the remote battery.
- Ensure the antenna is properly installed and not obstructed by metal or other electronic devices.
- Environmental factors (e.g., large buildings, electrical interference) can affect range.
- Doors Not Locking/Unlocking:
- Check the remote battery.
- Ensure the vehicle's central locking system is operational.
- System Malfunctions in Cold Weather:
- Extreme cold can affect battery performance (both remote and vehicle).
- Ensure all connections are secure and free from moisture or corrosion.
- Engine Cranks but Does Not Start:
- This often indicates an issue with the vehicle's immobilizer bypass or fuel delivery. Professional diagnosis is recommended.
If troubleshooting steps do not resolve the issue, contact Compustar customer support or an authorized installer for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | CS800-S |
| Remote Type | 1-Way, 4-Button Transmitters (x2) |
| Operating Range | Up to 1000 feet (300 meters) |
| Keyless Entry | Yes |
| Trunk Release | Yes |
| Diesel Engine Compatible | Yes |
| DroneMobile Ready | Yes (DR-3400 module sold separately) |
| Package Dimensions | 8 x 5.1 x 3.4 inches |
| Item Weight | 1.65 pounds |
| Manufacturer | Firstech (Compustar) |
| Date First Available | March 26, 2014 |
Warranty Information
Compustar products are typically covered by a manufacturer's warranty. The specific terms and duration of the warranty may vary based on the product, region, and point of purchase.
Please retain your proof of purchase (receipt or invoice) as it will be required for any warranty claims. For detailed warranty information, including coverage, limitations, and how to make a claim, please refer to the warranty card included with your product or visit the official Compustar website.
Support
For technical assistance, product inquiries, or support with your Compustar CS800-S remote start system, please utilize the following resources:
- Authorized Compustar Dealer: For installation, service, or advanced troubleshooting, contact the authorized Compustar dealer where you purchased or had your system installed.
- Compustar Official Website: Visit www.compustar.com for product information, FAQs, and support contact details.
- Customer Service: Refer to the contact information provided in your product packaging or on the official website for direct customer support.
When contacting support, please have your product model number (CS800-S) and any relevant purchase information ready.