Introduction
This manual provides essential instructions for the safe and effective use of your Burg-Wächter Favor S3 K Safe. Please read these instructions carefully before installation and operation to ensure proper functionality and security. This furniture safe features a solid walled body and a double-bit lock for reliable protection of your valuables.
Safety Instructions
- Always keep the keys in a secure location, separate from the safe itself.
- Do not store the keys inside the safe.
- Ensure the safe is securely mounted to prevent unauthorized removal.
- Regularly check the mounting for any signs of loosening.
- This safe is designed for indoor use. Avoid exposure to extreme temperatures or humidity.
- While the specifications mention "Fireproof", this typically refers to a degree of fire resistance, not absolute fire immunity. Consult the manufacturer's website for specific fire rating details if critical.
Package Contents
Verify that all components are present in the package:
- 1 x Burg-Wächter Favor S3 K Safe
- 2 x Double-bit keys
- Mounting material (screws and wall plugs)
- Instruction Manual (this document)

Setup and Installation
The Favor S3 K Safe is designed for wall mounting. Proper installation is crucial for security.
- Choose a suitable location: Select a discreet and secure location for mounting the safe. Ensure the wall material is strong enough to support the safe's weight and contents.
- Mark drilling points: Place the safe against the desired mounting surface. Use a pencil to mark the positions of the pre-drilled mounting holes on the back or bottom of the safe onto the wall.
- Drill holes: Using an appropriate drill bit for your wall type, drill holes at the marked positions. The diameter of the drill bit should match the wall plugs provided.
- Insert wall plugs: Insert the provided wall plugs into the drilled holes. Ensure they are flush with the wall surface.
- Mount the safe: Align the safe's mounting holes with the wall plugs. Insert the screws through the safe's holes and into the wall plugs. Tighten the screws firmly using a screwdriver or wrench until the safe is securely fastened to the wall. Do not overtighten.

Operating Instructions
The Favor S3 K Safe uses a double-bit key lock mechanism.
- Opening the safe:
- Insert one of the provided double-bit keys into the keyhole on the safe door.
- Turn the key clockwise (or counter-clockwise, depending on the lock mechanism) until the locking bolts retract.
- Pull the door open.
- Closing and locking the safe:
- Close the safe door firmly.
- Insert the key into the keyhole.
- Turn the key counter-clockwise (or clockwise) until the locking bolts extend and the door is securely shut.
- Remove the key and store it in a secure, separate location.


Maintenance
- Cleaning: Wipe the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Lock Mechanism: Periodically apply a small amount of graphite powder or a specialized lock lubricant to the keyhole to ensure smooth operation of the double-bit lock. Do not use oil-based lubricants.
- Inspection: Regularly inspect the safe for any signs of damage, wear, or tampering. Check the mounting bolts for tightness.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Key is difficult to turn or stuck. | Dust or debris in the lock mechanism; lack of lubrication. | Apply graphite powder or lock lubricant to the keyhole. Do not force the key. |
| Safe door does not close properly. | Obstruction in the door frame; safe not level; bent locking bolts. | Check for any obstructions. Ensure the safe is mounted level. If bolts are bent, contact customer support. |
| Safe feels loose after mounting. | Mounting screws are loose; wall material is compromised. | Retighten mounting screws. If the wall material is damaged, consider remounting in a new location or reinforcing the wall. |
Specifications
- Brand: Burg-Wächter
- Model: FAVOR S3 K
- External Dimensions (H x W x D): 200 x 310 x 200 mm (approx. 8.66"H x 12.99"W x 9.06"D)
- Internal Dimensions (H x W x D): 198 x 308 x 166 mm
- Lock Type: Double-bit key lock
- Color: Black
- Capacity: 10.2 Liters
- Material: Metal
- Mounting Type: Wall Mount
- Item Weight: 5 kg (approx. 11 lbs)
- Special Feature: Fireproof (refer to manufacturer for specific rating)
Warranty Information
Specific warranty details for the Burg-Wächter Favor S3 K Safe are provided by the manufacturer. Please refer to the official Burg-Wächter website or the documentation included with your purchase for comprehensive warranty terms and conditions.
Support and Contact
For further assistance, technical support, or inquiries regarding your Burg-Wächter Favor S3 K Safe, please visit the official Burg-Wächter website or contact their customer service department.
Official Website: www.burg.biz