1. Introduction
This manual provides essential instructions for the proper installation, operation, and maintenance of your Burg-Wächter FAVOR S5 K Safe. Please read this manual thoroughly before using the safe to ensure optimal security and longevity of the product. Keep this manual for future reference.
2. Product Overview
The Burg-Wächter FAVOR S5 K is a compact home safe designed for securing valuables such as passports, cash, jewelry, and important documents. It features a solid single-walled metal body and a reliable double-bit lock system for enhanced security.

Image 1: Front view of the Burg-Wächter FAVOR S5 K Safe. The safe is black with a keyhole centered on the door and a small 'favor' logo in the bottom right corner.
3. Safety Instructions
- Always keep the safe keys in a secure location, separate from the safe itself, and away from unauthorized individuals.
- Do not store the keys inside the safe.
- Ensure the safe is securely mounted to prevent unauthorized removal.
- Keep the safe door closed and locked when not in use.
- Avoid exposing the safe to extreme temperatures or humidity. This safe is not water-resistant.
- Do not attempt to force the lock or tamper with the safe mechanism.
4. Package Contents
Carefully unpack your Burg-Wächter FAVOR S5 K Safe and verify that all components are present:
- 1 x Burg-Wächter FAVOR S5 K Safe
- 2 x Double-bit keys
- Mounting hardware (screws and wall plugs)

Image 2: The Burg-Wächter FAVOR S5 K Safe shown with its two double-bit keys and the included screws and wall plugs for mounting.
5. Setup and Installation
The FAVOR S5 K safe is designed for wall mounting to enhance security. It features pre-drilled holes in the back wall for anchoring.
5.1 Choosing a Location
Select a discreet and secure location for your safe. Ensure the mounting surface (wall) is strong enough to support the weight of the safe and its contents.
5.2 Mounting Instructions
- Position the safe against the desired mounting surface.
- Mark the locations of the pre-drilled holes on the wall.
- Drill pilot holes into the wall at the marked locations, using a drill bit appropriate for the included wall plugs and your wall material.
- Insert the wall plugs into the drilled holes.
- Align the safe's pre-drilled holes with the wall plugs and secure the safe using the provided screws. Tighten firmly to ensure the safe is securely anchored.

Image 3: Back view of the Burg-Wächter FAVOR S5 K Safe, highlighting the two pre-drilled holes for wall mounting.
6. Operation
The FAVOR S5 K safe uses a double-bit key lock system.
6.1 Opening the Safe
- Insert one of the provided double-bit keys into the keyhole on the safe door.
- Turn the key clockwise (or counter-clockwise, depending on the lock mechanism) until the locking bolts retract.
- Pull the door open.
6.2 Closing and Locking the Safe
- Close the safe door firmly.
- Insert the key into the keyhole.
- Turn the key counter-clockwise (or clockwise) until the locking bolts extend and the door is securely shut.
- Remove the key and store it in a secure, separate location.

Image 4: Interior view of the Burg-Wächter FAVOR S5 K Safe with the door open, showing the internal shelf and the double-bit lock mechanism on the inside of the door.
7. Maintenance
- Cleaning: Wipe the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Lock Care: Periodically check the lock mechanism for smooth operation. If the key becomes difficult to turn, a small amount of graphite lubricant can be applied to the key and inserted into the lock. Do not use oil-based lubricants.
- Key Management: Ensure keys are not bent or damaged. If a key is lost, contact Burg-Wächter for assistance, providing your safe's serial number if available.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Key does not turn or is stiff. | Dust or debris in the lock; key is bent or damaged. | Apply graphite lubricant to the key. Ensure the key is not damaged. If the problem persists, contact support. |
| Safe door does not close properly. | Obstruction in the door frame; safe is not level. | Check for any obstructions. Ensure the safe is mounted level and securely. |
| Lost keys. | Keys misplaced or stolen. | Contact Burg-Wächter customer support for key replacement options. Provide proof of ownership and safe serial number. |
9. Specifications
| Brand | Burg-Wächter |
| Model | FAVOR S5 K |
| Product Dimensions (HxWxD) | 250 x 350 x 250 mm (9.84"D x 13.78"W x 9.84"H) |
| Internal Capacity | 18.6 Liters |
| Lock Type | Double-bit key lock |
| Material | Metal |
| Color | Black |
| Item Weight | 6 kg (15.4 pounds) |
| Mounting Type | Wall Mount (pre-drilled holes in back) |
| Water Resistance Level | Not Water Resistant |
10. Warranty and Support
For warranty information, technical support, or to order replacement keys, please refer to the official Burg-Wächter website or contact their customer service directly. Please have your product model and any serial numbers available when contacting support.
Manufacturer: Burg-Wächter
Part Number: FAVOR S5 K